Download or read book Advances in the Physical Metallurgy and Applications of Steels written by Metals Society and published by . This book was released on 1982 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.
Download or read book Advanced High Strength Sheet Steels written by Nina Fonstein and published by Springer. This book was released on 2015-11-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all types of advanced high strength steels ranging from dual-phase, TRIP. Complex phase, martensitic, TWIP steels to third generation steels, including promising candidates as carbide free bainitic steels, med Mn and Quenching & Partitioning processed steels. The author presents fundamentals of physical metallurgy of key features of structure and relationship of structure constituents with mechanical properties as well as basics of processing AHSS starting from most important features of intercritical heat treatment, with focus on critical phase transformations and influence of alloying and microalloying. This book intends to summarize the existing knowledge to show how it can be utilized for optimization and adaption of steel composition, processing, and for additional improvement of steel properties that should be recommended to engineering personal of steel designers, producers and end users of AHSS as well as to students of colleges and Universities who deal with materials for auto industry.
Download or read book Advances in the physical metallurgy and applications of steels written by and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by William F. Hosford and published by CRC Press. This book was released on 2010-04-05 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: For students ready to advance in their study of metals, Physical Metallurgy, Second Edition uses engaging historical and contemporary examples that relate to the applications of concepts in each chapter.This book combines theoretical concepts, real alloy systems, processing procedures, and examples of real-world applications. The author uses his ex
Download or read book Physical Metallurgy of High Manganese Steels written by Wolfgang Bleck and published by MDPI. This book was released on 2019-12-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue ‘Physical Metallurgy of High Manganese Steels’ addresses the highly fascinating class of manganese-alloyed steels with manganese contents well above 3 mass%. The book gathers manuscripts from internationally recognized researchers with stimulating new ideas and original results. It consists of fifteen original research papers. Seven contributions focus on steels with manganese contents above 12 mass%. These contributions cover fundamental aspects of process-microstrcuture-properties relationships with processes ranging from cold and warm rolling over deep rolling to heat treatment. Novel findings regarding the fatigue and fracture behavior, deformation mechanisms, and computer-aided design are presented. Additionally, the Special Issue also reflects the current trend of reduced Mn content (3-12 mass%) in advanced high strength steels (AHSS). Eight contributions were dedicated to these alloys, which are often referred to as 3rd generation AHSS, medium manganese steels or quenching and partitioning (Q&P/Q+P) steels. The interplay between advanced processing, mainly novel annealing variants, and microstructure evolution has been addressed using computational and experimental approaches. A deeper understanding of strain-rate sensitivity, hydrogen embrittlement, phase transformations, and the consequences for the materials’ properties has been developed. Hence, the topics included are manifold, fundamental-science oriented and, at the same time, relevant to industrial application.
Download or read book Advanced Steels written by Yuqing Weng and published by Springer. This book was released on 2011-04-20 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Automotive Steels written by Radhakanta Rana and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. - Presents recent developments on the design, metallurgy, processing, and applications of automotive steels - Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development - Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials
Download or read book Engineering Physical Metallurgy written by Robert Harry Heyer and published by . This book was released on 1944 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book Steels Processing Structure and Performance Second Edition written by George Krauss and published by ASM International. This book was released on 2015-03-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.
Download or read book New Developments on Metallurgy and Applications of High Strength Steels written by Materials Science and Technology and published by Wiley-TMS. This book was released on 2008-05-20 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings from New Developments on Metallurgy and Applications of High Strength Steels that took place on May 26-28, 2008 in Buenos Aires, Argentina. This conference provided a forum for researchers, producers and users to discuss the state of the art and future possibilities of high strength steel development and applications. Members of leading market sectors that demand HSS such as Automotive, Mechanics, Oil & Gas and Energy production and transmission were welcomed to present their current and principally their future requirements. On the production side, steel producers were invited to show their latest products and the processes to obtain them.
Download or read book Physical Metallurgy and Heat Treatment of Steel written by José Ignacio Verdeja González and published by Springer Nature. This book was released on 2022-09-10 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the physical metallurgy of steels as well as the heat treatments used to improve the their properties. A full chapter is dedicated to the atmospheres in the steelmaking, including the implications of the own gases generated in the iron and steelmaking factories and how they could be applied in these treatments. This book is specially conceived for graduate and undergraduate courses, being the result of more than 30 years of teaching experience in courses for undergraduate, graduate (master and Ph. D.), and companies (technicians). The trends in the re-utilization of industrial gases in the iron and steelmaking process are discussed by the authors. Additionally, the book comprises 41 solved exercises, problems and case-studies, as a complement of the theoretical sections of the text. These exercises, problems, and case-studies are based on problems observed in the industrial practice.
Download or read book High Performance Ferrous Alloys written by Radhakanta Rana and published by Springer Nature. This book was released on 2020-12-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current state of understanding of emerging iron alloys and high-alloy ferrous systems, in comparison with some conventional steels, is compiled in this single volume to further their development. While most of the conventional steels are produced routinely today, many advanced high strength steels and iron-based alloys are still in the laboratory stage. The iron-based emerging alloys can yield high levels of mechanical and physical properties due to their new alloy concepts and novel microstructures leading to multiple benefits of their use in terms of sustainability and environmental impact. This book contains introductory chapters that present the requisite background knowledge on thermodynamics, phase diagrams, and processing routes used for the ferrous alloys to enable the readers a smooth understanding of the main chapters. Then, an overview of the conventional microalloyed steels and advanced high strength steels is given to present the benchmark of the existing steels and ferrous alloys manifesting their current state-of-the-art in terms of physical metallurgy and engineering applications. Subsequent chapters detail novel, emerging ferrous alloys and high-alloy ferrous systems. Summarizes the state-of-the-art of emerging iron-based alloys and the new processing and physical metallurgy-related developments of high-alloy iron systems; Explores new iron-based systems driven by the need for new properties, enhanced performance, sustainable processes and educed environmental impact; Compiles cutting-edge research on the progress of materials science of iron-based systems, from physical metallurgy to engineering applications, and possible avenues for future research.
Download or read book Physical Metallurgy of Iron and Steel written by Rajendra Kumar and published by . This book was released on 1968 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advancements in the Metallurgical Engineering and Electrodeposition written by Uday Basheer Al-Naib and published by BoD – Books on Demand. This book was released on 2020-04-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy is a field of material science and engineering that studies the chemical and physical behavior of metallic elements, intermetallic compounds, and their mixtures, which are called alloys. These metals are widely used in this kind of engineering because they have unique combinations of mechanical properties (strength, toughness, and ductility) as well as special physical characteristics (thermal and electrical conductivity), which cannot be achieved with other materials. In addition to thousands of traditional alloys, many exciting new materials are under development for modern engineering applications. Metallurgical engineering is an area concerned extracting minerals from raw materials and developing, producing, and using mineral materials. It is based on the principles of science and engineering, and can be divided into mining processes, which are concerned with the extraction of metals from their ores to make refined alloys, and physical metallurgy, which includes the fabrication, alloying, heat treatment, joining and welding, corrosion protection, and different testing methods of metals. Conventional metal forming/shaping techniques include casting and forging, which remains an important processing route. Electrodeposition is one of the most used methods for metal and metallic alloy film preparation in many technological processes. Alloy metal coatings offer a wider range of properties than those obtained by a single metal film and can be applied to improve the properties of the substrate/coating system. This book covers a wide range of topics related to recent advancements in metallurgical engineering and electrodeposition such as metallurgy forming, structure, microstructure properties, testing and characterizations, and electrodeposition techniques. It also highlights the progress of metallurgical engineering, the ferrous and non-ferrous materials industries, and the electrodeposition of nanomaterials and composites.
