Download or read book Surface Engineering Fundamentals of coatings written by Prasanta Kumar Datta and published by . This book was released on 1993 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new title is published in three highly illustrated volumes and covers the latest developments in the subject. It provides a unique combination of the science of coatings and surfaces, the technologies of deposition, surface modification and analysis, and practical applications. The three volumes provide a useful and comprehensive blend of reviews and state-of-the-art papers written by international experts, and reflect the current status of and likely future advances in surface engineering. The first volume, Fundamentals of Coatings, considers principles of coating/substrate design affecting high temperature and aqueous corrosion, and wear properties, scanning the coatings spectrum from organic through metallic to ceramic. The emphasis in this volume is on the science and design of coatings and substrate systems rather than on technology.
Download or read book Advances in Surface Engineering Fundamentals of coatings written by Prasanta Kumar Datta and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's shortages of resources make the search for wear and corrosion resistant materials one of the most important tasks of the next century. Since the surface of a material is the location where any interaction occurs, it is that there the hardest requirements on the material are imposed: to be wear resistant for tools and bearings; to be corrosion resistant for turbine blades and tubes in the petrochemical industry; to be antireflecting for solar cells; to be decorative for architectural panels and to combine several of these properties in other applications. Surface engineering is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both coating and modification of the surface by ion implantation and laser beam melting. In recent years a continuously growing number of these techniques were developed to the extent that it became more and more difficult to maintain an overlook and to understand which of these highly differentiated techniques might be applied to resolve a given surface engineering problem. A similar development is also occuring for surface characterization techniques. This volume contains contributions from renowned scientists and engineers to the Eurocourse the aim of which was to inform about the various techniques and to give a comprehensive survey of the latest development on this subject.
Download or read book Advances in Surface Engineering Fundamentals of coatings written by Prasanta Kumar Datta and published by . This book was released on 1997 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 of a three-volume series representing the latest information on the state of the art of surface engineering today.
Download or read book Advanced Surface Coatings written by David S. Rickerby and published by Blackie Academic and Professional. This book was released on 1991 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise review of the most up to date coatings and surface treatments, their applications, principles of operation, strengths and weaknesses.
Download or read book Introduction to Surface Engineering and Functionally Engineered Materials written by Peter Martin and published by John Wiley & Sons. This book was released on 2011-10-04 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a clear and understandable text for users and developers of advanced engineered materials, particularly in the area of thin films, and addresses fundamentals of modifying the optical, electrical, photo-electric, triboligical, and corrosion resistance of solid surfaces and adding functionality to solids by engineering their surface, structure, and electronic, magnetic and optical structure. Thin film applications are emphasized. Through the inclusion of multiple clear examples of the technologies, how to use them,and the synthesis processes involved, the reader will gain a deep understanding of the purpose, goals, and methodology of surface engineering and engineered materials. Virtually every advance in thin film, energy, medical, tribological materials technologies has resulted from surface engineering and engineered materials. Surface engineering involves structures and compositions not found naturally in solids and is used to modify the surface properties of solids and involves application of thin film coatings, surface functionalization and activation, and plasma treatment. Engineered materials are the future of thin film technology. Engineered structures such as superlattices, nanolaminates, nanotubes, nanocomposites, smart materials, photonic bandgap materials, metamaterials, molecularly doped polymers and structured materials all have the capacity to expand and increase the functionality of thin films and coatings used in a variety of applications and provide new applications. New advanced deposition processes and hybrid processes are being used and developed to deposit advanced thin film materials and structures not possible with conventional techniques a decade ago. Properties can now be engineered into thin films that achieve performance not possible a decade ago.
Download or read book Surface Engineering Techniques and Applications Research Advancements written by Santo, Loredana and published by IGI Global. This book was released on 2014-02-28 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering includes many facets of materials science that help regulate the function, quality, and safety of products such as automotive, textile, and electronic materials. New technologies are developing to help enhance the surface performance. Surface Engineering Techniques and Applications: Research Advancements provides recent developments in surface engineering techniques and applications. It details scientific and technological results while also giving insight to current research, economic impact, and environmental concerns so that academics, practitioners, and professionals in the field, as well as students studying these areas, can deepen their understanding of new surface processes.
Download or read book Advances in Surface Engineering written by K. N. Strafford and published by Halsted Press. This book was released on 1990-01-01 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings Tribology written by Kenneth Holmberg and published by Elsevier. This book was released on 2009-03-18 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface coating field is a rapidly developing area of science and technology that offers new methods and techniques to control friction and wear. New coating types are continually being developed and the potential applications in different industrial fields are ever growing, ranging from machine components and consumer products to medical instruments and prostheses. This book provides an extensive review of the latest technology in the field, addressing techniques such as physical and chemical vapour deposition, the tribological properties of coatings, and coating characterization and performance evaluation techniques. Eleven different cases are examined in close detail to demonstrate the improvement of tribological properties and a guide to selecting coatings is also provided. This second edition is still the only monograph in the field to give a holistic view of the subject and presents all aspects, including test and performance data as well as insights into mechanisms and interactions, thus providing the level of understanding vital for the practical application of coatings. * An extensive review of the latest developments in the field of surface coatings * Presents both theory and practical applications * Includes a guide for selecting coatings
Download or read book Surface Engineering of Metals written by Tadeusz Burakowski and published by CRC Press. This book was released on 1998-12-23 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.
Download or read book Coatings Tribology written by K. Holmberg and published by Elsevier. This book was released on 1994-07-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.
Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.
Download or read book Advances in Surface Engineering Engineering applications written by Prasanta Kumar Datta and published by . This book was released on 1997 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Surface Coating Techniques for Modern Industrial Applications written by Roy, Supriyo and published by IGI Global. This book was released on 2020-09-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering, there are often situations in which the material of the main component is unable to sustain long life or protect itself from adverse operating environments. Moreover, in some cases, different material properties such as anti-friction and wear, anti-corrosive, thermal resistive, super hydrophobic, etc. are required as per the operating conditions. If those bulk components are made of such materials and possess those properties, the cost will be very high. In such cases, a practical solution is surface coating, which serves as a protective barrier to the bulk material from the adverse environment. In the last decade, with enormous effort, researchers and scientists have developed suitable materials to overcome those unfavorable operating conditions, and they have used advanced deposition techniques to enhance the adhesion and surface texturing of the coatings. Advanced Surface Coating Techniques for Modern Industrial Applications is a highly sought reference source that compiles the recent research trends in these new and emerging surface coating materials, deposition techniques, properties of coated materials, and their applications in various engineering and industrial fields. The book particularly focuses on 1) coating materials including anti-corrosive materials and nanomaterials, 2) coating methods including thermal spray and electroless disposition, and 3) applications such as surface engineering and thin film application. The book is ideal for engineers, scientists, researchers, academicians, and students working in fields like material science, mechanical engineering, tribology, chemical and corrosion science, bio-medical engineering, biomaterials, and aerospace engineering.
Download or read book Advanced Surface Engineering Research written by Mohammad Asaduzzaman Chowdhury and published by BoD – Books on Demand. This book was released on 2018-11-14 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering has rapidly expanded in recent years as the demand for improved materials has increased. Surface engineering is a valuable tool for conceiving both surface and bulk properties, which cannot be achieved simultaneously either by the coating material or by the substrate material alone. The book is written on the current trends of surface engineering and relevant research. The applied and basic research as well as some worthy concepts of materials related to this area is explained clearly to understand the need for surface engineering in industrial applications. The different surface modification processes, properties, and their characterizations are discussed elaborately for future research and as a text book. Modification of surface properties by films or coatings is used in industrial applications. This is an area of interest to numerous fields: fabrication of parts, mechanics, transport, catalysis, energy, production, microelectronics, optoelectronics, the leisure industry, etc. The properties are considered for protection against corrosion, oxidation or wear, biocompatibility, wetting, adhesion, durability, catalytic activity, and toughness. The modern concept of engineering is discussed to ensure that the contributions of this subject minimize energy consumption. The book will be used as a state of the art for present and future researchers, industrial components design, and control.
Download or read book Basics of Surface Technology written by M. Kamaraj and published by . This book was released on 2018-04-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on ?Basics of Surface Technology? has been written mainly for the undergraduate students of Metallurgical and Materials Engineering, and Mechanical, Production and Maintenance Engineering in Technical universities. Many structural components and engineering machine parts lose their function and fail due to surface degradation causing shut down of the plant involving monetary loss and man hours. It is very essential to maintain the parts of the structure and machines in proper condition so that continuous production can be ensured. The engineering students should have a thorough knowledge of surface engineering and technology so that they can take preventive measures to stop or minimize the break down of the engineering components.As in many structural and production machineries iron base alloys and nickel base super alloys are used, the metallurgical background of these materials is described in the second chapter. The basics of surface degradation like wear, erosion, corrosion, oxidation, and hot corrosion are explained in the next chapter. Surface treatments to withstand aggressive environments are given in the following chapters dealing with diffusional and non-diffusional processes.Surface coatings based on chemical and electro-chemical depositions, welding and cladding are presented and discussed in detail. Advanced methods of surface treatment by thermal spraying, physical vapour deposition and chemical vapour deposition for high technological applications are explained with suitable illustrations for basic understanding of the process.Testing methods for the quality and soundness of the coated surface and the international standards are given following which the industrial applications of the surface treatment for different requirements are discussed.Finally, for the benefit of undergraduate and postgraduate students, a chapter on questions has been added which will be very useful to have a thorough understanding of the subject and solve any practical problems in surface technology.
Download or read book Advanced Surface Engineering Research written by Mohammad Asaduzzaman Chowdhury and published by . This book was released on 2018 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering has rapidly expanded in recent years as the demand for improved materials has increased. Surface engineering is a valuable tool for conceiving both surface and bulk properties, which cannot be achieved simultaneously either by the coating material or by the substrate material alone. The book is written on the current trends of surface engineering and relevant research. The applied and basic research as well as some worthy concepts of materials related to this area is explained clearly to understand the need for surface engineering in industrial applications. The different surface modification processes, properties, and their characterizations are discussed elaborately for future research and as a text book. Modification of surface properties by films or coatings is used in industrial applications. This is an area of interest to numerous fields: fabrication of parts, mechanics, transport, catalysis, energy, production, microelectronics, optoelectronics, the leisure industry, etc. The properties are considered for protection against corrosion, oxidation or wear, biocompatibility, wetting, adhesion, durability, catalytic activity, and toughness. The modern concept of engineering is discussed to ensure that the contributions of this subject minimize energy consumption. The book will be used as a state of the art for present and future researchers, industrial components design, and control.
