Download or read book Advances in Powder Metallurgy Particulate Materials 2003 written by and published by . This book was released on 2003 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Powder Metallurgy Particulate Materials written by and published by . This book was released on 2005 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques
Download or read book Advances in powder metallurgy written by A. Simchi and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Warm compaction is a cost saving and effective method for obtaining high performance powder metallurgy (PM) parts. This chapter presents the principles of warm compaction and technical aspects of the process. The green and sintered properties of warm compacted parts are discussed and compared with conventionally (cold) produced compacts. The applications of the process for ferrous and non-ferrous PM parts are presented and future trends are outlined.
Download or read book Advances in powder metallurgy written by H. Danninger and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferrous powder metallurgy (PM) makes up the majority of powder metallurgy products with regard to tonnage. Improving performance is the main trend for pressed and sintered parts, in particular the introduction of cost-effective alloy elements such as Cr and Mn. Furthermore, much can be gained in ferrous PM by elaborate secondary operations. In metal injection moulding (MIM) products, there is a clear trend towards increasingly complex shapes and microsized parts. PM tool steels offer a much finer and fully isotropic microstructure compared to their wrought counterparts and the carbide content may be much higher, resulting in excellent application properties.
Download or read book Advances in Powder Metallurgy Particulate Materials 2006 written by and published by . This book was released on 2006 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ferrous Powder Metallurgy written by Andrej Šalak and published by Cambridge International Science Publishing. This book was released on 1995 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the position of ferrous powder metallurgy, the author deals with the theoretical fundamentals and technical and technological aspects of the current state of knowledge in ferrous powder metallurgy so that special attention may be given to all factors influencing parts and materials with the required properties, form and dimensions, stressing their higher economic efficiency. The book also shows the extensive possibilities for further development of ferrous powder metallurgy and should therefore contribute to increasing the level of general and detailed knowledge of experts working in this area and should help in transition from fabrication of parts by conventional methods with all typical economic and ecological shortcomings to fabrication by powder metallurgy methods.
Download or read book Advanced Structural Materials 2003 written by H.A. Calderon-Benavides and published by Trans Tech Publications Ltd. This book was released on 2003-12-15 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Structural Materials Symposium of the Annual Congress of the Mexican Academy of Materials Science, August 26th - 31st, 2003, Cancún Quintana Roo, México
Download or read book Researches in Powder Metallurgy written by Ionel Chicinaş and published by Trans Tech Publications Ltd. This book was released on 2011-01-20 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected papers from the 4th International Conference on Powder Metallurgy, RoPM 2009, 8-11 July, Craiova, Romania
Download or read book Mechanical Properties and Performance of Engineering Ceramics II Volume 27 Issue 2 written by Rajan Tandon and published by John Wiley & Sons. This book was released on 2009-09-29 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains over 70 papers on advanced research and development of processing, mechanical properties and mechanics of ceramics and composites from the proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, in Cocoa Beach, Florida. The conference was organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division. It covers underlying fundamental links between microstructure and properties, and the ability to achieve desired multifunctional properties through innovative processing techniques.
Download or read book Novel Materials Processing by Advanced Electromagnetic Energy Sources written by S. Miyake and published by Elsevier. This book was released on 2005-11-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Symposium in Novel Materials Processing by Advanced Electromagnetic Energy Sources (MAPEES'04)*Identifies and details recent progress achieved by advanced electromagnetic energy sources in materials processing.*Explores novel approaches to advanced electromagnetic energy processing of materials in an attempt to discover new and unique industrial fields.
Download or read book Sintering From Empirical Observations to Scientific Principles written by Randall German and published by Butterworth-Heinemann. This book was released on 2014-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: As sintering applications march toward a $30 billion global business, the models for sintering have progressed, but generally follow behind observation. Documentation of the steps needed to build to a quantitative and predictive theory are often missed. Sintering: From Empirical Observations to Scientific Principles partitions sintering applications and observations to show critical turning points required to establish modern sintering as a predictive science. This book, written by the most cited author in his field, is laced with people, organizations, critical steps, and important formulations in a mixture of history, personalities, and applications. Exploring how insights in seemingly unrelated fields sparked progress, it is also a teaching tool to show where there is success, where there are problems, and how to organize teams to leapfrog to new applications or plateaus of use. Randall German's Sintering: From Empirical Observations to Scientific Principles is a platform for directly addressing the critical control parameters in these new research and development efforts. - Shows how the theories and understanding of sintering were developed and improved over time, and how different products were developed, ultimately leading to important knowledge and lessons for solving real sintering problems - Covers all the necessary infrastructure of sintering theory and practice, such as atomic theory, surface energy, microstructure, and measurement and observation tools - Introduces the history and development of such early sintered products as porcelain, tungsten lamp filaments, bronze bearings, steel automotive components, platinum crucibles and more
Download or read book Microengineering of Metals and Ceramics Part I written by Henry Baltes and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. In this volume, authors from three major competence centres for microengineering illustrate step by step the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.
Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.
Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2018-11-30 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Non-Ferrous Metal Powders: Technologies and Applications, Second Edition, provides information on the manufacture and use of powders of non-ferrous metals that has taken place for many years in the area previously known as Soviet Russia. It presents the huge amount of knowledge and experience that has built up over the last fifty years. Originally published in Russia by several prominent scientists, researchers and engineers, this presents an update to the first book that includes sections on classification, properties, treatment methods and production. This updated edition contains new content on the powders, along with newer methods of 3D printing. - Covers the manufacturing methods, properties and importance of the following metals: aluminum, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Includes new content on recent advances, such as additive manufacturing and 3D printing of non-ferrous metal alloys and specific powders for advanced techniques, including metal injection molding technologies - Expands on topics such as safety engineering in the production of powders and advanced areas of engineering research, such as nanopowder processes
Download or read book Steel Heat Treatment Handbook 2 Volume Set written by George E. Totten and published by CRC Press. This book was released on 2006-11-14 with total page 1571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents the classical perspectives that form the basis of heat treatment processes while incorporating descriptions of the latest advances to impact this enduring technology. The second edition of the bestselling Steel Heat Treatment Handbook now offers abundantly updated and extended coverage in two self-contained volumes:
Download or read book Handbook of Metal Injection Molding written by Donald F. Heaney and published by Woodhead Publishing. This book was released on 2019-05-21 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys and precious metals. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. - Provides an authoritative guide to metal injection molding and its applications - Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding and sintering - Comprehensively examines quality issues, such as feedstock characterization, modeling and simulation, common defects and carbon content control
