Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Download or read book Advances in Oil and Gas Well Engineering written by Yongcun Feng and published by BoD – Books on Demand. This book was released on 2024-03-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide oil and gas development has shifted from conventional reservoirs to unconventional and deepwater reservoirs, characterized by high pressure, high temperature, ultra-low permeability, and extensively developed natural fractures. This transition to increasingly hostile environments introduces new challenges in well drilling and completion, such as downhole drilling issues, formation damage, and reduced productivity. Aiming to solve the challenges, drilling and completion technologies have excelled greatly in the past two decades. This book covers managed pressure drilling (MPD), the role of artificial intelligence (AI) in refining drilling processes, and the transformative effects of digitalization and automation. Emphasizing efficiency, safety, and environmental responsibility, the book also integrates methods like casing while drilling for improved efficiency, advanced diagnostics for rig safety, stabilization techniques for wellbores in fractured reservoirs, cement sheath integrity maintenance, and the optimization of continuous gas lift. Bridging theoretical concepts with practical applications, the narrative offers insights into both operational techniques and safety strategies, drawing from past experiences. The current state-of-the-art theories, technologies, and practices are covered, bridging the gaps between fundamental theories and engineering applications.
Download or read book Advanced Natural Gas Engineering written by Xiuli Wang and published by Elsevier. This book was released on 2013-11-25 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas is playing an increasing role in meeting world energy demands because of its abundance, versatility, and its clean burning nature. As a result, lots of new gas exploration, field development and production activities are under way, especially in places where natural gas until recently was labeled as "stranded. Because a significant portion of natural gas reserves worldwide are located across bodies of water, gas transportation in the form of LNG or CNG becomes an issue as well. Finally natural gas is viewed in comparison to the recently touted alternatives. Therefore, there is a need to have a book covering all the unique aspects and challenges related to natural gas from the upstream to midstream and downstream. All these new issues have not been addressed in depth in any existing book. To bridge the gap, Xiuli Wang and Michael Economides have written a new book called Advanced Natural Gas Engineering. This book will serve as a reference for all engineers and professionals in the energy business. It can also be a textbook for students in petroleum and chemical engineering curricula and in training departments for a large group of companies.
Download or read book Standard Handbook of Petroleum Natural Gas Engineering written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents the mathematics and general engineering and science of petroleum engineering. It also examines the auxiliary equipment and provides coverage of all aspects of drilling and well completion.
Download or read book Applied Drilling Engineering written by Adam T. Bourgoyne and published by . This book was released on 1986 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Drilling Engineering presents engineering science fundamentals as well as examples of engineering applications involving those fundamentals.
Download or read book Advanced Reservoir Engineering written by Tarek Ahmed and published by Elsevier. This book was released on 2011-03-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Reservoir Engineering offers the practicing engineer and engineering student a full description, with worked examples, of all of the kinds of reservoir engineering topics that the engineer will use in day-to-day activities. In an industry where there is often a lack of information, this timely volume gives a comprehensive account of the physics of reservoir engineering, a thorough knowledge of which is essential in the petroleum industry for the efficient recovery of hydrocarbons.Chapter one deals exclusively with the theory and practice of transient flow analysis and offers a brief but thorough hands-on guide to gas and oil well testing. Chapter two documents water influx models and their practical applications in conducting comprehensive field studies, widely used throughout the industry. Later chapters include unconventional gas reservoirs and the classical adaptations of the material balance equation.* An essential tool for the petroleum and reservoir engineer, offering information not available anywhere else* Introduces the reader to cutting-edge new developments in Type-Curve Analysis, unconventional gas reservoirs, and gas hydrates * Written by two of the industry's best-known and respected reservoir engineers
Download or read book Advances in Petroleum Engineering and Petroleum Geochemistry written by Santanu Banerjee and published by Springer. This book was released on 2019-03-11 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is based on the best papers accepted for presentation during the 1st Springer Conference of the Arabian Journal of Geosciences (CAJG-1), Tunisia 2018. The book is of interest to all researchers in the fields of petroleum engineering, reservoir engineering and petroleum geochemistry. The MENA region accounts for more than 50 percent of the world's hydrocarbon reserves. Despite being the largest oil and gas producer of the world, the MENA countries face routine problems regarding petroleum engineering, reservoir modelling and production optimization. This volume offers an overview of the latest information and ideas regarding reservoir engineering, petrophysical engineering, petroleum system modelling, non-conventional energy resources and environmental impact of oil production. Main topics include: 1. Advances in petrophysical characterization of reservoir rocks2. Enhanced oil recovery methods 3. Advances in petroleum exploration and management 4. Evaluation of hydrocarbon source potential and petroleum system modeling5. Non-conventional energy resources
Download or read book Advanced Reservoir Management and Engineering written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2011-09-28 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 1. Fundamentals of Well Testing -- Chapter 2. Decline and Type-Curves Analysis -- Chapter 3. Water Influx -- Chapter 4. Unconventional Gas Reservoirs -- Chapter 5. Performance of Oil Reservoirs -- Chapter 6. Predicting Oil Reservoir Performance -- Chapter 7. Fundamentals of Enhanced Oil Recovery -- Chapter 8. Economic Analysis -- Chapter 9. Analysis of Fixed Capital Investments -- Chapter 10. Advanced Evaluation Approaches -- Chapter 11. Professionalism and Ethics.
Download or read book Sustainable Natural Gas Reservoir and Production Engineering written by David Wood and published by Gulf Professional Publishing. This book was released on 2021-10-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Natural Gas Reservoir and Production Engineering, the latest release in The Fundamentals and Sustainable Advances in Natural Gas Science and Engineering series, delivers many of the scientific fundamentals needed in the natural gas industry, including improving gas recovery, simulation processes for fracturing methods, and methods for optimizing production strategies. Advanced research covered includes machine learning applications, gas fracturing mechanics aimed at reducing environmental impact, and enhanced oil recovery technologies aimed at capturing carbon dioxide. Supported by corporate and academic contributors along with two well-distinguished editors, this book provides today's natural gas engineers the fundamentals and advances in a convenient resource - Helps readers advance from basic equations used in conventional gas reservoirs - Presents structured case studies to illustrate how new principles can be applied in practical situations - Covers advanced topics, including machine learning applications to optimize predictions, controls and improve knowledge-based applications - Helps accelerate emission reductions by teaching gas fracturing mechanics with an aim of reducing environmental impacts and developing enhanced oil recovery technologies that capture carbon dioxide
Download or read book Drilling Engineering written by and published by . This book was released on 2014 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Rock Mechanics written by Bernt S. Aadnoy and published by Gulf Professional Publishing. This book was released on 2011-05-26 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pt. 1. Fundamentals of solid mechanics -- pt. 2. Petroleum rock mechanics.
Download or read book Process Safety in Upstream Oil and Gas written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book makes the case for process safety and provides a brief overviews of the upstream industry and of CCPS Risk Based Process Safety. The majority of the book focuses on the concepts of implementing process safety in wells, onshore, offshore, and projects. Topics include Overview of Upstream Operations; Overview of Risk Based Process Safety (RBPS); Application of RBPS in Drilling, Completions, Work-Overs & Interventions, Application of RBPS in Onshore Production, Application of RBPS in Offshore Production, Application of RBPS to Engineering Design, Installation, and Construction, Future Developments in the Field
Download or read book Introduction to Petroleum Engineering written by John R. Fanchi and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents key concepts and terminology for a multidisciplinary range of topics in petroleum engineering Places oil and gas production in the global energy context Introduces all of the key concepts that are needed to understand oil and gas production from exploration through abandonment Reviews fundamental terminology and concepts from geology, geophysics, petrophysics, drilling, production and reservoir engineering Includes many worked practical examples within each chapter and exercises at the end of each chapter highlight and reinforce material in the chapter Includes a solutions manual for academic adopters
Download or read book Petroleum Production Engineering written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2017-02-10 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today's more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today's production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. - Updated to cover today's critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers - Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting - Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nontechnical Guide to Petroleum Geology Exploration Drilling and Production written by Norman J. Hyne and published by Pennwell Books. This book was released on 1995 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used by corporate training departments and colleges worldwide, this is the most complete upstream guide available. Contents: The nature of gas and oil The Earth's crust - where we find time Deformation of sedimentary rocks Sandstone reservoir rocks Carbonate reservoir rocks Sedimentary rock distribution Mapping Ocean environment and plate tectonics Source rocks, generation, migration, and accumilation of petroleum Petroleum traps Petroleum exploration - geological and geochemical Petroleum exploration - geophysical Drilling preliminaries Drilling a well - the mechanics Drilling problems Drilling techniques Evaluating a well Completing a well Surface treatment and storage Offshore drilling and production Workover Reservoir mechanics Petroleum production Reserves Improved oil recovery.
Download or read book Applied Geoscience in Shale Exploration and Production written by Peter Bartok and published by Pennwell Books. This book was released on 2018 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the year 2000, unconventional shale plays have contributed greatly to the global oil and gas supply, particularly in the United States. Understanding and managing these resources requires a unique understanding about the geology, geophysics, rock physics, and rock mechanics of each reservoir in a seamless interdisciplinary approach. Equally important, advanced technologies in seismic and microseismic processing enable professionals to map and identify the hydrocarbon resource and establish the optimum pathways for production.
