Download or read book Advances in Mechanical Engineering and Mechanics II written by Tarak Bouraoui and published by Springer Nature. This book was released on 2021-11-22 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on recent findings and applications relating to structure modeling and computation, design methodology, advanced manufacturing, mechanical behavior of materials, fluid mechanics, energy, and heat transfer. Further, it highlights cutting-edge issues in biomechanics and mechanobiology, and describes simulation and intelligent techniques applied to the control of industrial processes. Chapters are based on a selection of original peer-reviewed papers presented at the 5th International Tunisian Congress on Mechanics, COTUME, which was held on March 22–24, 2021, from Hammamet, Tunisia, in hybrid format. All in all, the book offers a good balance of fundamental research and industrially relevant applications, and an in-depth analysis of the current state of the art and challenges in various subfields of mechanical engineering; it provides researchers and professionals with a timely snapshot and a source of inspiration for future research and collaborations.
Download or read book Advances on Mechanics Design Engineering and Manufacturing II written by Francisco Cavas-Martínez and published by Springer. This book was released on 2019-04-27 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Advances in Mechanical Engineering Materials and Mechanics written by Mohamed Kharrat and published by Springer. This book was released on 2020-08-05 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Download or read book Advances in Applied Mechanics written by and published by Elsevier. This book was released on 2007-04-04 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major developments in the fields of fluid and solid mechanics are scattered throughout an array of technical journals, often making it difficult to find what the real advances are, especially for a researcher new to the field or an individual interested in discovering the state-of-the-art in connection with applications. The Advances in Applied Mechanics book series draws together recent significant advances in various topics in applied mechanics. Published since 1948, Advances in Applied Mechanics aims to provide authoritative review articles on topics in the mechanical sciences, primarily of interest to scientists and engineers working in the various branches of mechanics, but also of interest to the many who use the results of investigations in mechanics in various application areas such as aerospace, chemical, civil, environmental, mechanical and nuclear engineering. Advances in Applied Mechanics continues to be a publication of high visibility and impact. Review articles are provided by active, leading scientists in the field by invitation of the editors. Many of the articles published have become classics within their fields. Volume 41 in the series contains articles on topological fluid mechanics, electrospinning, vortex dynamics and self-assembly. Covers all fields of the mechanical sciences Highlights classical and modern areas of mechanics that are ready for review Provides comprehensive coverage of the field in question
Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Advances in Experimental Impact Mechanics written by Bo Song and published by Elsevier. This book was released on 2021-08-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the latest advances in experimental impact mechanics, this book provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experiments involving the dynamic responses of materials and structures. It provides tailored guidelines and solutions for specific applications and materials, covering topics such as dynamic characterization of metallic materials, fiber-like materials, low-impedance materials, concrete and more. Damage evolution and constitutive behavior of materials under impact loading, one-dimensional strain loading, intermediate and high strain rates, and other environmental conditions are discussed, as are techniques using high temperature testing and miniature Kolsky bars. Provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experimental impact mechanics Covers experimental guidelines and solutions for an array of different materials, conditions, and applications Enables readers to quickly design and perform their own experiments and properly interpret the results Looks at application-specific post-test analysis
Download or read book Advanced Engineering Fluid Mechanics written by K. Muralidhar and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid mechanics continues to dominate the world of engineering. This book bridges the gap between first and higher level text books on the subject. It shows that the approximate approaches are essentially globally averaged versions of the local treatment, that in turn is covered in considerable detail in the second edition.
Download or read book Advanced Solid Mechanics written by Farzad Hejazi and published by CRC Press. This book was released on 2021-05-09 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to demonstrate the fundamental theory of advanced solid mechanics through simplified derivations with details illustrations to deliver the principal concepts. It covers all conceptual principals on two- and three-dimensional stresses, strains, stress-strain relations, theory of elasticity and theory of plasticity in any type of solid materials including anisotropic, orthotropic, homogenous and isotropic. Detailed explanation and clear diagrams and drawings are accompanied with the use of proper jargons and notations to present the ideas and appropriate guide the readers to explore the core of the advanced solid mechanics backed by case studies and examples. Aimed at undergraduate, senior undergraduate students in advanced solid mechanics, solid mechanics, strength of materials, civil/mechanical engineering, this book Provides simplified explanation and detailed derivation of correlation and formula implemented in advanced solid mechanics Covers state of two and three-dimensional stresses and strains in solid materials in various conditions Describes principal constitutive models for various type of materials include of anisotropic, orthotropic, homogenous and isotropic materials. Includes stress-strain relation and theory of elasticity for solid materials. Explores inelastic behaviour of material, theory of plasticity and yielding criteria.
Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.
Download or read book Advances in Mechanical Engineering and Mechanics written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Mechanics of Structures written by Demeter G. Fertis and published by CRC Press. This book was released on 1996-04-12 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work details general theories and reliable analysis techniques for solving real-world problems in linear and non-linear mechanics. This book looks at the structural and mechanical behaviour of components such as beams, frames and plates of both uniform and variable stiffness in terms of both stress and deformation. It also emphasizes the challenging demands of industry. College or university bookstores may order five or more copies at a special student price, available on request from Marcel Dekker, Inc.
Download or read book Solid Mechanics in Engineering written by Raymond Parnes and published by . This book was released on 2001-11-28 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic, modern introduction to solid mechanics that is carefully motivated by realistic Engineering applications. Based on 25 years of teaching experience, Raymond Parnes uses a wealth of examples and a rich set of problems to build the reader's understanding of the scientific principles, without requiring 'higher mathematics'. Highlights of the book include The use of modern SI units throughout A thorough presentation of the subject stressing basic unifying concepts Comprehensive coverage, including topics such as the behaviour of materials on a phenomenological level Over 600 problems, many of which are designed for solving with MATLAB, MAPLE or MATHEMATICA. Solid Mechanics in Engineering is designed for 2-semester courses in Solid Mechanics or Strength of Materials taken by students in Mechanical, Civil or Aeronautical Engineering and Materials Science and may also be used for a first-year graduate program.
Download or read book Advances in Materials Mechanics and Manufacturing written by Fakher Chaari and published by Springer Nature. This book was released on 2019-09-17 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.
Download or read book Advanced Engineering Analysis written by L. P. Lebedev and published by World Scientific. This book was released on 2012 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Engineering Analysis: The Calculus of Variations and Functional Analysis with Applications in Mechanics Advanced Engineering Analysis is a textbook on modern engineering analysis, covering the calculus of variations, functional analysis, and control theory, as well as applications of these disciplines to mechanics. The book offers a brief and concise, yet complete explanation of essential theory and applications. It contains exercises with hints and solutions, ideal for self-study. Book jacket.
Download or read book Advances in Mechanical Engineering Materials and Mechanics written by Mohamed Kharrat and published by Springer Nature. This book was released on 2020-08-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.
Download or read book Advances In Engineering Mechanics reflections And Outlooks In Honor Of Theodore Y t Wu written by Daniel T Valentine and published by World Scientific. This book was released on 2005-11-29 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents more than 40 original papers on recent advances in several topics in engineering mechanics presented at The Theodore Y-T Wu Symposium on Engineering Mechanics: A celebration of Professor Wu's scientific contributions for his 80th birthday. The distinguished contributors include several members of the National Academy of Engineers and the topics cover nonlinear water waves, swimming and flying in nature, biomechanics, data analysis methodology, and propulsion hydrodynamics.The papers honor the significant accomplishments of Professor Wu in Engineering Science at Caltech, particularly in the areas of nonlinear waves, hydrodynamics, biomechanics and wave-structure interaction. They review the present state of the art of engineering mechanics, and chart the future of the field from the viewpoint of civil engineering, biomechanics, geophysics, mechanical engineering, naval architecture, ocean, and offshore engineering. The primary purpose of this book is to provide guidance and inspiration for those interested in continuing to advance engineering mechanics into the 21st century. To quote Professor Wu: ”The value of a book publication lies in disseminating new knowledge attained with effort and dedication from all those who participate, and in having the useful results within ready reach of students and researchers actively working in the field.”
