Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Advances on Mechanics Design Engineering and Manufacturing II written by Francisco Cavas-Martínez and published by Springer. This book was released on 2019-04-27 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Advanced Manufacturing Processes III written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2021-11-17 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser–ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7–10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.

Download or read book Introduction to Advanced Manufacturing written by Ramy Harik and published by SAE International. This book was released on 2019-07-24 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Advanced Manufacturing was written by two experienced and passionate engineers whose mission is to make the subject of advanced manufacturing easy to understand and a practical solution to everyday problems. Harik, Ph.D. and Wuest, Ph.D., professors who have taught the subject for decades, combined their expertise to develop both an applied manual and a theoretical reference that addresses many different needs. Introduction to Advanced Manufacturing covers the following topics in detail: • Composites Manufacturing • Smart Manufacturing • Additive Manufacturing • Computer Aided Manufacturing • Polymers Manufacturing • Assembly Processes • Manufacturing Quality Control and Productivity • Subtractive Manufacturing • Deformative Manufacturing Introduction to Advanced Manufacturing offers a new, refreshing way of studying how things are made in the digital age. With academics and industry professionals in mind, Introduction to Advanced Manufacturing paves the ground for those interested in the new opportunities of Industry 4.0.

Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.

Download or read book Advances in Manufacturing III written by Justyna Trojanowska and published by Springer Nature. This book was released on 2022-03-25 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technology aimed at increasing the efficiency of production processes and to foster the implementation of Industry 4.0 solutions in manufacturing. Gathering peer-review contributions to the 7th International Scientific Technical Conference MANUFACTURING 2022, held in Poznan, Poland on May 16-19, 2022, it describes advanced engineering methods to optimize different stages and aspects of the production process, including product design, production scheduling, equipment maintenance and safety. It discusses the applications of augmented/virtual and mixed reality within the manufacturing industry and for education and training purposes, and highlights cutting-edge solutions for green and sustainable production. Offering a timely, practice-oriented reference guide for both researchers and practitioners in manufacturing, this book is also intended to contribute bridging the gap between university and industry, fostering a closer communication and cooperation between them.

Download or read book Advanced Manufacturing Technologies written by Kapil Gupta and published by Springer. This book was released on 2017-04-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

Download or read book Recent Advances in Manufacturing Engineering and Processes written by Ramesh K. Agarwal and published by Springer Nature. This book was released on 2021-10-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.

Download or read book Advances in Integrated Design and Manufacturing in Mechanical Engineering II written by Serge Tichkiewitch and published by Springer Science & Business Media. This book was released on 2010-04-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 33 papers presented in this book were selected from amongst the 97 papers presented during the sixth edition of the International Conference on Integrated Design and Manufacturing in Mechanical Engineering during 28 sessions. This conference represents the state-of-the-art research in the field. Two keynote papers introduce the subject of the Conference and are followed by the different themes highlighted during the conference.

Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr

Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study

Download or read book Advances in Manufacturing III written by Adam Hamrol and published by Springer Nature. This book was released on 2022-05-09 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative strategies for quality control, risk assessment and sustainable development in production processes, in the era of industry 4.0. Based on peer-reviewed contributions to the 7th International Scientific-Technical Conference MANUFACTURING 2022, held on May 16–19, 2022, in Poznan, Poland, the chapters cover important topics relating to the use of quality management strategies in different stages of the production processes. They report on methods for statistical process control, vision control and inspection of machines, on the application of machine learning methods in quality control and/or risk assessment, on issues relating to digital transformation, and on methods to improve occupational safety. Besides industrial applications, the book also discusses the use quality management tools for educational purposes. By bridging between concepts in quality engineering, ergonomics, digitalization and industry 4.0, this book offers an authoritative source of information for researchers, engineers and managers.

Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.

Download or read book Advances in Design written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2006-07-02 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Design examines recent advances and innovations in product design paradigms, methods, tools and applications. It presents fifty-two selected papers which were presented at the 14th CIRP International Design Seminar held in May 2004. This book will be bought by postgraduate and senior undergraduate students studying product design. It will also be of interest to researchers and practitioners working in the field of product design.

Download or read book Advances in Manufacturing II written by Adam Hamrol and published by Springer. This book was released on 2019-04-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in manufacturing, with a special emphasis on product design, production planning, and implementation of both resources and production processes. The content is based on papers presented at the 6th International Scientific Technical Conference MANUFACTURING 2019, held in Poznan, Poland on May 19-22, 2019. The main focus is on showing best practices to use tools currently available in the enterprises to effectively improving industrial processes. Knowledge and production flow management, decision-making systems, production leveling, enterprise efficiency, as well as maintenance, modeling and simulation of production processes are just some of the topics discussed in this book, which offers a timely and practice-oriented reference guide for applied researchers, product engineers and product managers.

Download or read book Advances in Manufacturing Engineering and Materials II written by Sergej Hloch and published by Springer Nature. This book was released on 2021-03-16 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.

Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.