Download or read book Advances in Manufacturing Engineering and Materials II written by Sergej Hloch and published by Springer Nature. This book was released on 2021-03-16 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.

Download or read book Recent Advances in Manufacturing Engineering and Processes written by Ramesh K. Agarwal and published by Springer Nature. This book was released on 2021-10-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.

Download or read book Advances in Materials and Manufacturing Engineering written by Leijun Li and published by Springer Nature. This book was released on 2020-01-09 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019), held at KIIT Deemed to be University, Bhubaneswar, India, from 15 to 17 March 2019. It covers theoretical and empirical developments in various areas of mechanical engineering, including manufacturing, production, machine design, fluid/thermal engineering, and materials.

Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study

Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.

Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.

Download or read book Handbook of Research on Advancements in Manufacturing Materials and Mechanical Engineering written by Burstein, Leonid and published by IGI Global. This book was released on 2020-09-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production, new materials development, and mechanics are the central subjects of modern industry and advanced science. With a very broad reach across several different disciplines, selecting the most forward-thinking research to review can be a hefty task, especially for study in niche applications that receive little coverage. For those subjects, collecting the research available is of utmost importance. The Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering is an essential reference source that examines emerging obstacles in these fields of engineering and the methods and tools used to find solutions. Featuring coverage of a broad range of topics including fabricating procedures, automated control, and material selection, this book is ideally designed for academics; tribology and materials researchers; mechanical, physics, and materials engineers; professionals in related industries; scientists; and students.

Download or read book Advances in Manufacturing Engineering and Materials written by Sergej Hloch and published by Springer. This book was released on 2018-09-14 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. Based on the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), held in Nový Smokovec, Slovakia on 18–22 June 2018, it covers advances in various disciplines, which are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions.

Download or read book Introduction to Advanced Manufacturing written by Ramy Harik and published by SAE International. This book was released on 2019-07-24 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Advanced Manufacturing was written by two experienced and passionate engineers whose mission is to make the subject of advanced manufacturing easy to understand and a practical solution to everyday problems. Harik, Ph.D. and Wuest, Ph.D., professors who have taught the subject for decades, combined their expertise to develop both an applied manual and a theoretical reference that addresses many different needs. Introduction to Advanced Manufacturing covers the following topics in detail: • Composites Manufacturing • Smart Manufacturing • Additive Manufacturing • Computer Aided Manufacturing • Polymers Manufacturing • Assembly Processes • Manufacturing Quality Control and Productivity • Subtractive Manufacturing • Deformative Manufacturing Introduction to Advanced Manufacturing offers a new, refreshing way of studying how things are made in the digital age. With academics and industry professionals in mind, Introduction to Advanced Manufacturing paves the ground for those interested in the new opportunities of Industry 4.0.

Download or read book Advanced Applications in Manufacturing Engineering written by Mangey Ram and published by Woodhead Publishing. This book was released on 2018-10-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Applications in Manufacturing Engineering presents the latest research and development in manufacturing engineering across a range of areas, treating manufacturing engineering on an international and transnational scale. It considers various tools, techniques, strategies and methods in manufacturing engineering applications. With the latest knowledge in technology for engineering design and manufacture, this book provides systematic and comprehensive coverage on a topic that is a key driver in rapid economic development, and that can lead to economic benefits and improvements to quality of life on a large-scale. - Presents the latest research and developments in manufacturing engineering - Covers a comprehensive spread of manufacturing engineering areas for different tasks - Discusses tools, techniques, strategies and methods in manufacturing engineering applications - Considers manufacturing engineering at an international and transnational scale - Enables the reader to learn advanced applications in manufacturing engineering

Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.

Download or read book Advances in Materials Mechanics and Manufacturing written by Fakher Chaari and published by Springer Nature. This book was released on 2019-09-17 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.

Download or read book Advances in Manufacturing Engineering and Materials written by Sergej Hloch and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. Based on the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), held in Nový Smokovec, Slovakia on 18–22 June 2018, it covers advances in various disciplines, which are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions.

Download or read book Materials Industrial and Manufacturing Engineering Research Advances 1 1 written by Denni Kurniawan and published by Trans Tech Publications Ltd. This book was released on 2013-12-04 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4 – 6, 2013, Johor Bahru, Malaysia. The 187 papers are grouped as follows: Chapter 1: Materials Engineering; Chapter 2: Industrial Engineering; Chapter 3: Manufacturing Engineering

Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.

Download or read book Recent Advances in Materials and Manufacturing Technologies written by P. Nageswara Rao and published by Trans Tech Publications Ltd. This book was released on 2019-08-30 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT 2018) Selected, peer reviewed papers from the 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT-2018), November 19-20, 2018, Hyderabad, India

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.