Download or read book Advances in Hydraulic and Pneumatic Drives and Control 2020 written by Jarosław Stryczek and published by Springer Nature. This book was released on 2020-10-18 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technical achievements in the field of hydraulic drives. The chapters, selected from contributions presented at the International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Controls, NSHP 2020, held on October 21-23, 2020, in Trzebieszowice, Poland, cover a wide range of topics such as theoretical advances in fluid technology, work machines in mining, construction, marine and manufacturing industry, and practical issues relating to the application and operation of hydraulic drives. Further topics include: safety and environmental issues associated with the use of machines with hydraulic drive, and new materials in design of hydraulic components. A special emphasis is given to new solutions for hydraulic components and systems as well as to the identification of phenomena and processes occurring during the operation of hydraulic and pneumatic systems.
Download or read book Advances in Hydraulic and Pneumatic Drives and Control 2023 written by Jarosław Stryczek and published by Springer Nature. This book was released on 2023-09-25 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technical achievements in the field of hydraulic drives. The chapters, selected from contributions presented at the International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Controls, NSHP 2023, held on October 11-13, 2023, in Piechowice, Poland, cover a wide range of topics such as theoretical advances in fluid technology, work machines in mining, construction, marine and manufacturing industry, and practical issues relating to the application and operation of hydraulic drives. Further topics include: safety and environmental issues associated with the use of machines with hydraulic drive, designing test stands with hydraulic and pneumatic components, advancing control of hydraulic systems, analyzing vibration issues, application of renewable energy sources, and new materials in the design of hydraulic components. Special emphasis is given to new solutions for hydraulic components and systems as well as to the identification of phenomena and processes occurring during the operation of hydraulic and pneumatic systems.
Download or read book Hydraulics and Pneumatics Controls written by Shanmuga Sundaram and published by S. Chand Publishing. This book was released on 2006 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For B.E./B.Tech. students of Anna and Other Technical Universities of India
Download or read book Pneumatic and Hydraulic Systems written by William Bolton and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of college courses including Advanced GNVQ, HNC/D and City & Guilds certificates demand a knowledge of pneumatics in relation to control systems. Students studying PLCs, for instance, may not have the background in pneumatics needed to put their knowledge to work in practical applications. This book has been written to cover these courses, and in particular the Advanced GNVQ unit in Hydraulics and Pneumatics. It is also suitable for first year degree modules, and will provide a useful grounding in the subject for any engineer requiring an understanding of pneumatic and hydraulic control systems. Bill Bolton has written this book as an introduction to the basic principles of pneumatics and hydraulics, system components and their application in control systems, the main emphasis being on pneumatics. The text is designed for students and is ideal for courses with an element of independent study, with numerous worked examples and problems (answers supplied) provided throughout the book. A genuine textbook in a field dominated by professional books Ideal for first year degree modules Full coverage of Advanced GNVQ Unit: Hydraulics and Pneumatics
Download or read book Pneumatic Drives written by Peter Beater and published by Springer Science & Business Media. This book was released on 2007-02-23 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the whole range of today’s technology for pneumatic drives. It details drives for factory automation and automotive applications as well as describes the technology for the process industry like positioners or spring-and-diaphragm. In addition, the book examines several control strategies like binary mode cylinder drives or position controlled drives and computer aided analysis of complex systems.
Download or read book Hydraulics and Pneumatics written by Andrew Parr and published by Elsevier. This book was released on 2013-10-22 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulics and Pneumatics: A Technician's and Engineer's Guide provides an introduction to the components and operation of a hydraulic or pneumatic system. This book discusses the main advantages and disadvantages of pneumatic or hydraulic systems. Organized into eight chapters, this book begins with an overview of industrial prime movers. This text then examines the three different types of positive displacement pump used in hydraulic systems, namely, gear pumps, vane pumps, and piston pumps. Other chapters consider the pressure in a hydraulic system, which can be quickly and easily controlled by devices such as unloading and pressure regulating valves. This book discusses as well the importance of control valves in pneumatic and hydraulic systems to regulate and direct the flow of fluid from compressor or pump to the various load devices. The final chapter deals with the safe-working practices of the systems. This book is a valuable resource for process control engineers.
Download or read book Hydraulics and Pneumatics written by Andrew Parr and published by Elsevier. This book was released on 1999-02-25 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly all industrial processes require objects to be moved, manipulated or subjected to some sort of force. This is frequently accomplished by means of electrical equipment (such as motors or solenoids), or via devices driven by air (pneumatics) or liquids (hydraulics).This book has been written by a process control engineer as a guide to the operation of hydraulic and pneumatic systems for all engineers and technicians who wish to have an insight into the components and operation of such a system.This second edition has been fully updated to include all recent developments such as the increasing use of proportional valves, and includes an extra expanded section on industrial safety. It will prove indispensable to all those wishing to learn about hydraulics and pneumatics. * Gives more essential, but simple maths on pipe flow and pressure drops* Offers the latest information on proportional valves and the electronics cards now appearing in hydraulic systems* Includes a new section on safety including European legislation
Download or read book Hydraulic Control Systems written by Noah D. Manring and published by John Wiley & Sons. This book was released on 2019-09-24 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides key updates to a must-have text on hydraulic control systems This fully updated, second edition offers students and professionals a reliable and comprehensive guide to the hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. The book also offers all new information on: advanced control topics; auxiliary components (reservoirs, accumulators, coolers, filters); hybrid transmissions; multi-circuit systems; and digital hydraulics. Chapters in Hydraulic Control Systems, 2nd Edition cover; fluid properties; fluid mechanics; dynamic systems and control; hydraulic valves, pumps, and actuators; auxiliary components; and both valve and pump controlled hydraulic systems. The book presents illustrative case studies throughout that highlight important topics and demonstrate how equations can be implemented and used in the real world. It also features end-of-chapter exercises to help facilitate learning. It is a powerful tool for developing a solid understanding of hydraulic control systems that will serve all practicing engineers in the field. Provides a useful review of fluid mechanics and system dynamics Offers thorough analysis of transient fluid flow forces within valves Adds all new information on: advanced control topics; auxiliary components; hybrid transmissions; multi-circuit systems; and digital hydraulics Discusses flow ripple for both gear pumps and axial piston pumps Presents updated analysis of the pump control problems associated with swash plate type machines Showcases a successful methodology for hydraulic system design Features reduced-order models and PID controllers showing control objectives of position, velocity, and effort Hydraulic Control Systems, 2nd Edition is an important book for undergraduate and first-year graduate students taking courses in fluid power. It is also an excellent resource for practicing engineers in the field of fluid power.
Download or read book Pneumatic Drives written by Robbie Dolcetto and published by . This book was released on 2021-07-25 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: A pneumatic system is a collection of interconnected components using compressed air to do work for automated equipment. ... The compressed air or pressurized gas is usually filtered and dried to protect the cylinders, actuators, tools, and bladders performing the work. The book explains the design aspects of pneumatic systems to realize the necessities as mentioned above. The book also presents many typical examples of designing pneumatic systems, in the English units, purely for educational or guidance purposes. The knowledge gained may be applied to develop more extensive industrial pneumatic systems.
Download or read book INTRODUCTION TO HYDRAULICS AND PNEUMATICS written by S. ILANGO and published by PHI Learning Pvt. Ltd.. This book was released on 2011-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory textbook is designed for undergraduate courses in Hydraulics and Pneumatics/Fluid Power/Oil Hydraulics taught in Mechanical, Industrial and Mechatronics branches of Engineering disciplines. Besides focusing on the fundamentals, the book is a basic, practical guide that reflects field practices in design, operation and maintenance of fluid power systems—making it a useful reference for practising engineers specializing in the area of fluid power technology. With the trends in industrial production, fluid power components have also undergone modifications in designs. To keep up with these changes, additional information and materials on proportional solenoids have been included in the second edition. It also updates drawings/circuits in the pneumatic section. Besides, the second edition includes a CD-ROM that acquaints the readers with the engineering specifications of several pumps and valves being manufactured by industry. KEY FEATURES : • Gives step-by-step methods of designing hydraulic and pneumatic circuits. • Provides simple and logical explanation of programmable logic controllers used in hydraulic and pneumatic circuits. • Explains applications of hydraulic circuits in machine tool industry. • Elaborates on practical problems in a chapter on troubleshooting. • Chapter-end review questions help students understand the fundamental principles and practical techniques for obtaining solutions.
Download or read book TRANSBALTICA XIII Transportation Science and Technology written by Olegas Prentkovskis and published by Springer Nature. This book was released on 2023-02-21 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative research and developments in the broad field of transportation. It covers solutions relating to intelligent vehicles and infrastructure, energy and combustion management, vehicle dynamics and engineering, as well as research on railway transport, aerospace technologies, logistics and security. Contributions are based on peer-reviewed papers presented at the 13th international scientific conference "Transbaltica: Transportation Science and Technology", held on September 15-16, 2022, at Vilnius Gediminas Technical University, in Vilnius, Lithuania. All in all, this book offers extensive information on modern transport systems, with a good balance of theory and practice.
Download or read book The Hydraulic and Pneumatic Drives and Controls NSHP Conference written by Jarosław Stryczek and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Pneumatics written by Michael J. Pinches and published by . This book was released on 1997 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most complete, up-to-date guide to power pneumatics system design, component selection, and problem solving. This book presents power pneumatics from the systems standpoint, with extensive coverage of system design and component selection. Compressed air generation, processing and distribution are covered at length. The operation and application of values and actuators is covered from both a practical and theoretical viewpoint. Pneumatic circuitry is explained, along with a range of solutions to both pneumatic and electro-pneumatic problems. System controls discussed range from mechanical up to PLC/PC operations, and a chapter on the application of logic assists in problem solving. Practical advice is provided for installation, maintenance and troubleshooting. A final chapter on design draws together information from the entire book to show how significant design problems can be solved. This book is for any professional or student working in the field of power pneumatics.
Download or read book Pneumatic and Hydraulic Control Systems written by M. A. Aizerman and published by Elsevier. This book was released on 2013-10-22 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pneumatic and Hydraulic Control Systems, Volume 2, documents the proceedings of a symposium on pneumohydraulic automation. The symposium is a continuation of the first symposium of papers on pneumohydraulic automatics which was published in 1959 by the Academy of Sciences, USSR. The present collection forms part of the lectures and reports presented at the second and third All-Union Conference on pneumohydraulic automatics and embraces a wide range of problems associated with the design and application of pneumohydraulic equipment in the automation of industrial units and other objects. This volume contains 23 chapters organized into four parts. Part I contains papers on the general problems of pneumo- and hydro-automatics. Part II presents studies on pneumatic and hydraulic methods and systems of automatic regulation. Part III is devoted to pneumatic computing devices and methods of computation. The papers in Part IV cover pneumo- and hydro-automatics in the German Democratic Republic and Czechoslovakia.
Download or read book Advances in Design Simulation and Manufacturing V written by Vitalii Ivanov and published by Springer Nature. This book was released on 2022-05-24 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between mechanical and chemical engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers recent findings concerning the mechanics of fluids, solids, and structures, and numerical and computational methods for solving coupled problems in manufacturing. Further, it reports on recent developments in chemical process technology, heat and mass transfer research, and energy-efficient technologies, describing applications in the food and energy production sector. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Download or read book Advanced Manufacturing Processes IV written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2022-09-08 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6–9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Download or read book Pneumatic Systems and Circuits Advanced Level written by Joji Parambath and published by . This book was released on 2020-06-18 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book highlights the problem of signal conflicts and various methods of their elimination in detail. The developments of multiple-actuator circuits using cascade method and shift register are explained through many examples. The language of the book is simple, the topics are logically arranged, and information is most up-to-date. Fluid power professionals in the industries and faculty members of engineering institutes should possess exceptional knowledge about pneumatic systems and circuits for their continuing professional development. Likewise, a student in an engineering institute must acquire the knowledge of pneumatics to upgrade his/her knowledge. As the knowledge and skill of the reader improve, his/her professional life is going to be more comfortable and outstanding. If you are looking for in-depth knowledge into fluid power, then this book is a valuable resource that will assist you in your career advancement. The book has been written by a professional trainer who has trained thousands of professionals and students, over 25 years. If you are looking for a more in-depth knowledge into fluid power, then this book is a valuable resource that will assist you in your quest for professional development.
