Download or read book Advances in Fault Detection and Diagnosis Using Filtering Analysis written by Ziyun Wang and published by Springer Nature. This book was released on 2021-10-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides fault detection and diagnosis approaches from the perspective of filtering analysis. In order to design fault detection filters, it uses set-membership principles to deal with the unknown but bounded noise term. Some regular geometric spaces are introduced, such as the ellipsoid, polyhedron, interval, to describe the feasible parameter sets of the given system. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. Some typical application cases are studied for fault detection and diagnosis in detail, which are power converter, permanent magnet synchronous motor, pitch system of wind turbine. Given its scope, the book offers a valuable guide for students, teachers, engineers and researchers in the field of fault detection and diagnosis.

Download or read book Algorithms for Fault Detection and Diagnosis written by Francesco Ferracuti and published by MDPI. This book was released on 2021-03-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increasing demand for security and reliability in manufacturing and mechatronic systems, early detection and diagnosis of faults are key points to reduce economic losses caused by unscheduled maintenance and downtimes, to increase safety, to prevent the endangerment of human beings involved in the process operations and to improve reliability and availability of autonomous systems. The development of algorithms for health monitoring and fault and anomaly detection, capable of the early detection, isolation, or even prediction of technical component malfunctioning, is becoming more and more crucial in this context. This Special Issue is devoted to new research efforts and results concerning recent advances and challenges in the application of “Algorithms for Fault Detection and Diagnosis”, articulated over a wide range of sectors. The aim is to provide a collection of some of the current state-of-the-art algorithms within this context, together with new advanced theoretical solutions.

Download or read book Fault Diagnosis Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing demands for efficiency and product quality plus progress in the integration of automatic control systems in high-cost mechatronic and safety-critical processes, the field of supervision (or monitoring), fault detection and fault diagnosis plays an important role. The book gives an introduction into advanced methods of fault detection and diagnosis (FDD). After definitions of important terms, it considers the reliability, availability, safety and systems integrity of technical processes. Then fault-detection methods for single signals without models such as limit and trend checking and with harmonic and stochastic models, such as Fourier analysis, correlation and wavelets are treated. This is followed by fault detection with process models using the relationships between signals such as parameter estimation, parity equations, observers and principal component analysis. The treated fault-diagnosis methods include classification methods from Bayes classification to neural networks with decision trees and inference methods from approximate reasoning with fuzzy logic to hybrid fuzzy-neuro systems. Several practical examples for fault detection and diagnosis of DC motor drives, a centrifugal pump, automotive suspension and tire demonstrate applications.

Download or read book Fault Detection and Diagnosis in Industrial Systems written by L.H. Chiang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early and accurate fault detection and diagnosis for modern chemical plants can minimize downtime, increase the safety of plant operations, and reduce manufacturing costs. This book presents the theoretical background and practical techniques for data-driven process monitoring. It demonstrates the application of all the data-driven process monitoring techniques to the Tennessee Eastman plant simulator, and looks at the strengths and weaknesses of each approach in detail. A plant simulator and problems allow readers to apply process monitoring techniques.

Download or read book Fault Detection Diagnosis and Prognosis written by Fausto Pedro García Márquez and published by BoD – Books on Demand. This book was released on 2020-02-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main concepts, state of the art, advances, and case studies of fault detection, diagnosis, and prognosis. This topic is a critical variable in industry to reach and maintain competitiveness. Therefore, proper management of the corrective, predictive, and preventive politics in any industry is required. This book complements other subdisciplines such as economics, finance, marketing, decision and risk analysis, engineering, etc. The book presents real case studies in multiple disciplines. It considers the main topics using prognostic and subdiscipline techniques. It is essential to link these topics with the areas of finance, scheduling, resources, downtime, etc. to increase productivity, profitability, maintainability, reliability, safety, and availability, and reduce costs and downtime. Advances in mathematics, modeling, computational techniques, dynamic analysis, etc. are employed analytically. Computational techniques, dynamic analysis, probabilistic methods, and mathematical optimization techniques are expertly blended to support the analysis of prognostic problems with defined constraints and requirements. The book is intended for graduate students and professionals in industrial engineering, business administration, industrial organization, operations management, applied microeconomics, and the decisions sciences, either studying maintenance or needing to solve large, specific, and complex maintenance management problems as part of their jobs. The work will also be of interest to researches from academia.

Download or read book Signal Processing for Fault Detection and Diagnosis in Electric Machines and Systems written by Mohamed Benbouzid and published by IET. This book was released on 2020-12-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 5 chapters that discusses the following topics: Parametric signal processing approach; The signal demodulation techniques; Kullback-Leibler divergence for incipient fault diagnosis; Higher-order spectra and Fault detection and diagnosis based on principal component analysis.

Download or read book Model Based Fault Diagnosis Techniques written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2012-12-20 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guaranteeing a high system performance over a wide operating range is an important issue surrounding the design of automatic control systems with successively increasing complexity. As a key technology in the search for a solution, advanced fault detection and identification (FDI) is receiving considerable attention. This book introduces basic model-based FDI schemes, advanced analysis and design algorithms, and mathematical and control-theoretic tools. This second edition of Model-Based Fault Diagnosis Techniques contains: • new material on fault isolation and identification and alarm management; • extended and revised treatment of systematic threshold determination for systems with both deterministic unknown inputs and stochastic noises; • addition of the continuously-stirred tank heater as a representative process-industrial benchmark; and • enhanced discussion of residual evaluation which now deals with stochastic processes. Model-based Fault Diagnosis Techniques will interest academic researchers working in fault identification and diagnosis and as a text it is suitable for graduate students in a formal university-based course or as a self-study aid for practising engineers working with automatic control or mechatronic systems from backgrounds as diverse as chemical process and power engineering.

Download or read book A fault detection method for FADS system based on interval valued neutrosophic sets belief rule base and D S evidence reasoning written by Qianlei Jia and published by Infinite Study. This book was released on with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault detection, with the characteristics of strong uncertainty and randomness, has always been one of the research hotspots in the field of aerospace. Considering that devices will inevitably encounter various unknown interference in the process of use, which greatly limits the performance of many traditional fault detection methods. Therefore, the main aim of this paper is to address this problem from the perspective of uncertainty and randomness of measurement signal. In information engineering, interval-valued neutrosophic sets (IVNSs), belief rule base (BRB), and Dempster-Shafer (D-S) evidence reasoning are always characterized by the strong ability in revealing uncertainty, but each has its drawbacks. As a result, the three theories are firstly combined in this paper to form a powerful fault detection algorithm. Besides, a series of innovations are proposed to improve the method, including a new score function based on p-norm for IVNSs and a new approach of calculating the similarity between IVNSs, which are both proved by authoritative prerequisites. To illustrate the effectiveness of the proposed method, flush air data sensing (FADS), a technologically advanced airborne sensor, is adopted in this paper. The aerodynamic model of FADS is analyzed in detail using knowledge of aerodynamics under subsonic and supersonic conditions, meanwhile, the high-precision model is established based on the aerodynamic database obtained from CFD software.

Download or read book Gas Turbine Diagnostics written by Ranjan Ganguli and published by CRC Press. This book was released on 2012-12-13 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used for power generation, gas turbine engines are susceptible to faults due to the harsh working environment. Most engine problems are preceded by a sharp change in measurement deviations compared to a baseline engine, but the trend data of these deviations over time are contaminated with noise and non-Gaussian outliers. Gas Turbine Diagnostics: Signal Processing and Fault Isolation presents signal processing algorithms to improve fault diagnosis in gas turbine engines, particularly jet engines. The algorithms focus on removing noise and outliers while keeping the key signal features that may indicate a fault. The book brings together recent methods in data filtering, trend shift detection, and fault isolation, including several novel approaches proposed by the author. Each method is demonstrated through numerical simulations that can be easily performed by the reader. Coverage includes: Filters for gas turbines with slow data availability Hybrid filters for engines equipped with faster data monitoring systems Nonlinear myriad filters for cases where monitoring of transient data can lead to better fault detection Innovative nonlinear filters for data cleaning developed using optimization methods An edge detector based on gradient and Laplacian calculations A process of automating fault isolation using a bank of Kalman filters, fuzzy logic systems, neural networks, and genetic fuzzy systems when an engine model is available An example of vibration-based diagnostics for turbine blades to complement the performance-based methods Using simple examples, the book describes new research tools to more effectively isolate faults in gas turbine engines. These algorithms may also be useful for condition and health monitoring in other systems where sharp changes in measurement data indicate the onset of a fault.

Download or read book Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems written by Hamid Reza Karimi and published by Elsevier. This book was released on 2021-06-14 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems gives a systematic description of the many facets of envisaging, designing, implementing, and experimentally exploring emerging trends in fault diagnosis and failure prognosis in mechanical, electrical, hydraulic and biomedical systems. The book is devoted to the development of mathematical methodologies for fault diagnosis and isolation, fault tolerant control, and failure prognosis problems of engineering systems. Sections present new techniques in reliability modeling, reliability analysis, reliability design, fault and failure detection, signal processing, and fault tolerant control of engineering systems. Sections focus on the development of mathematical methodologies for diagnosis and prognosis of faults or failures, providing a unified platform for understanding and applicability of advanced diagnosis and prognosis methodologies for improving reliability purposes in both theory and practice, such as vehicles, manufacturing systems, circuits, flights, biomedical systems. This book will be a valuable resource for different groups of readers - mechanical engineers working on vehicle systems, electrical engineers working on rotary machinery systems, control engineers working on fault detection systems, mathematicians and physician working on complex dynamics, and many more. Presents recent advances of theory, technological aspects, and applications of advanced diagnosis and prognosis methodologies in engineering applications Provides a series of the latest results, including fault detection, isolation, fault tolerant control, failure prognosis of components, and more Gives numerical and simulation results in each chapter to reflect engineering practices

Download or read book Diagnosis and Fault tolerant Control 1 written by Vicenc Puig and published by John Wiley & Sons. This book was released on 2021-12-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in fault diagnosis strategies for complex dynamic systems. Its impetus derives from the need for an overview of the challenges of the fault diagnosis technique, especially for those demanding systems that require reliability, availability, maintainability and safety to ensure efficient operations. Moreover, the need for a high degree of tolerance with respect to possible faults represents a further key point, primarily for complex systems, as modeling and control are inherently challenging, and maintenance is both expensive and safety-critical. Diagnosis and Fault-tolerant Control 1 also presents and compares different diagnosis schemes using established case studies that are widely used in related literature. The main features of this book regard the analysis, design and implementation of proper solutions for the problems of fault diagnosis in safety critical systems. The design of the considered solutions involves robust data-driven, model-based approaches.

Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2000-03-29 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.

Download or read book Detection of Abrupt Changes written by Michèle Basseville and published by . This book was released on 1993 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents mathematical tools and techniques for solving change detection problems in wide domains like signal processing, controlled systems and monitoring. The book covers a wide class of stochastic processes, including scalar independent observations and multidimensional dependent ARMA.

Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.

Download or read book Energy Production and Management in the 21st Century written by E. R. Magaril and published by WIT Press. This book was released on 2014-04-23 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the future of energy production and management in a changing world, this book contains the proceedings of the first international conference on Energy Production and Management in the 21st Century – The Quest for Sustainable Energy. Developed societies require an ever increasing amount of energy resources, which creates complex technological challenges. The idea is to compare conventional energy sources, particularly hydrocarbons, with a number of other ways of producing energy, emphasising new technological developments. The challenge in many cases is the conversion of new sources of energy into useful forms, while finding efficient ways of storing and distributing energy. Energy policies and management are of primary importance to achieving sustainability, and need to be consistent with recent advances made in energy production and distribution. The book will also discuss the energy use of industrial processes, including the imbedded energy contents of materials, particularly those in the built environment. Energy production, distribution and usage, result in environmental risks which need to be better understood. They are part of the energy economics and relate to human environmental health as well as ecosystems behaviour. Topics covered include: Energy production; Energy management; Energy policies; Energy and economic growth; Energy efficiency; Hydropower; Wind energy; Solar energy; Nuclear energy; Biomass and biofuels; Energy storage; Hydrocarbons; Gas production; Processing of oil and gas; Energy conversion; Energy savings; Energy in the built environment; Energy networks; Pipelines; Energy balance; Energy economics; Heat, pumping systems; Environmental risk; Safety management; Emissions; C-O2 separation and storage; Imbedded energy; Energy and transport; Energy use in industry; Energy transmission and distribution; Energy industry efficiency; Energy security; Training in energy and sustainability.

Download or read book Advances in Future Manufacturing Engineering written by Guohui Yang and published by CRC Press. This book was released on 2015-06-11 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Future Manufacturing Engineering (ICFME 2014) was held in Hong Kong, December 10-11, 2014. It gathered academics, industry managers and experts, manufacturing engineers, university students all interested or proficient in the field of manufacturing engineering, including research, design and development of systems, p

Download or read book Recent Advances in Machines and Mechanisms written by Vijay Kumar Gupta and published by Springer Nature. This book was released on 2022-10-04 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of 5th International and 20th National Conference on Machines and Mechanisms (iNaCoMM 2021) held at PDPM IIITDM Jabalpur during 9-11 December 2021. The conference was held in collaboration with the Association of Machines and Mechanisms (AMM) India and International Federation for the Promotion of Mechanism and Machine sciences (IFToMM). Various topics covered in this book include kinematics and dynamics of machines, compliant mechanisms; gear, cams and power transmission systems; mechanisms and machines for rural, agricultural and industrial applications; mechanisms for space applications; mechanisms for energy harvesting; robotics and automation; human-centric robotics; soft robotics; man-machine system, mechatronics and micro–mechanisms; CAD and CAGD; control of machines; vibration of machines & rotor dynamics; acoustic and noise; tribology; condition monitoring and failure analysis; fault diagnosis and health monitoring; biomedical engineering; and composites and advanced materials. Given the contents, the book will be useful for researchers and professionals working in the various domains of mechanical engineering.