Download or read book Advances in Experimental Impact Mechanics written by Bo Song and published by Elsevier. This book was released on 2021-08-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the latest advances in experimental impact mechanics, this book provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experiments involving the dynamic responses of materials and structures. It provides tailored guidelines and solutions for specific applications and materials, covering topics such as dynamic characterization of metallic materials, fiber-like materials, low-impedance materials, concrete and more. Damage evolution and constitutive behavior of materials under impact loading, one-dimensional strain loading, intermediate and high strain rates, and other environmental conditions are discussed, as are techniques using high temperature testing and miniature Kolsky bars. Provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experimental impact mechanics Covers experimental guidelines and solutions for an array of different materials, conditions, and applications Enables readers to quickly design and perform their own experiments and properly interpret the results Looks at application-specific post-test analysis

Download or read book Experimental Mechanics of Solids written by Cesar A. Sciammarella and published by John Wiley & Sons. This book was released on 2012-03-26 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental solid mechanics is the study of materials to determine their physical properties. This study might include performing a stress analysis or measuring the extent of displacement, shape, strain and stress which a material suffers under controlled conditions. In the last few years there have been remarkable developments in experimental techniques that measure shape, displacement and strains and these sorts of experiments are increasingly conducted using computational techniques. Experimental Mechanics of Solids is a comprehensive introduction to the topics, technologies and methods of experimental mechanics of solids. It begins by establishing the fundamentals of continuum mechanics, explaining key areas such as the equations used, stresses and strains, and two and three dimensional problems. Having laid down the foundations of the topic, the book then moves on to look at specific techniques and technologies with emphasis on the most recent developments such as optics and image processing. Most of the current computational methods, as well as practical ones, are included to ensure that the book provides information essential to the reader in practical or research applications. Key features: Presents widely used and accepted methodologies that are based on research and development work of the lead author Systematically works through the topics and theories of experimental mechanics including detailed treatments of the Moire, Speckle and holographic optical methods Includes illustrations and diagrams to illuminate the topic clearly for the reader Provides a comprehensive introduction to the topic, and also acts as a quick reference guide This comprehensive book forms an invaluable resource for graduate students and is also a point of reference for researchers and practitioners in structural and materials engineering.

Download or read book Recent Advances in Experimental Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 71 papers presented at the symposium on “Recent Advances in Experimental Mechanics” which was organized in honor of Professor Isaac M. Daniel. The symposium took place at Virginia Polytechnic Institute and State University on th June 23-28, 2002, in conjunction with the 14 US National Congress of Applied Mechanics. The book is a tribute to Isaac Daniel, a pioneer of experimental mechanics and composite materials, in recognition of his continuous, original, diversified and outstanding contributions for half a century. The book consists of invited papers written by leading experts in the field. It contains original contributions concerning the latest developments in experimental mechanics. It covers a wide range of subjects, including optical methods of stress analysis (photoelasticity, moiré, etc.), composite materials, sandwich construction, fracture mechanics, fatigue and damage, nondestructive evaluation, dynamic problems, fiber optic sensors, speckle metrology, digital image processing, nanotechnology, neutron diffraction and synchrotron radiation methods. The papers are arranged in the following nine sections: Mechanical characterization of material behavior, composite materials, fracture and fatigue, optical methods, n- destructive evaluation, neutron diffraction and synchrotron radiation methods, hybrid methods, composite structures, and structural testing and analysis.

Download or read book Advances in Experimental Mechanics VIII written by Richard L. Burguete and published by Trans Tech Publications Ltd. This book was released on 2011-08-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation, September 7-9, 2011, Edinburgh, Scotland

Download or read book Advances in Mathematical Modeling and Experimental Methods for Materials and Structures written by Rivka Gilat and published by Springer Science & Business Media. This book was released on 2009-12-18 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of cutting-edge papers, written by leading authors in honor of Professor Jacob Aboudi, covers a wide spectrum of topics in the field, presents both theoretical and experimental approaches, and suggests directions for possible future research.

Download or read book Advances in Applied Mechanics written by and published by Elsevier. This book was released on 2007-04-04 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major developments in the fields of fluid and solid mechanics are scattered throughout an array of technical journals, often making it difficult to find what the real advances are, especially for a researcher new to the field or an individual interested in discovering the state-of-the-art in connection with applications. The Advances in Applied Mechanics book series draws together recent significant advances in various topics in applied mechanics. Published since 1948, Advances in Applied Mechanics aims to provide authoritative review articles on topics in the mechanical sciences, primarily of interest to scientists and engineers working in the various branches of mechanics, but also of interest to the many who use the results of investigations in mechanics in various application areas such as aerospace, chemical, civil, environmental, mechanical and nuclear engineering. Advances in Applied Mechanics continues to be a publication of high visibility and impact. Review articles are provided by active, leading scientists in the field by invitation of the editors. Many of the articles published have become classics within their fields. Volume 41 in the series contains articles on topological fluid mechanics, electrospinning, vortex dynamics and self-assembly. - Covers all fields of the mechanical sciences - Highlights classical and modern areas of mechanics that are ready for review - Provides comprehensive coverage of the field in question

Download or read book Recent Advances in Computational and Experimental Mechanics Vol I written by D. Maity and published by Springer. This book was released on 2022-12-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. - I) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.

Download or read book Advancement of Optical Methods in Experimental Mechanics Volume 3 written by Helena Jin and published by Springer Science & Business Media. This book was released on 2013-08-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods in Experimental Mechanics: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: Optical metrology and displacement measurements at different scales Digital holography and experimental mechanics Optical measurement systems using polarized light Surface topology Digital image correlation Optical methods for MEMS and NEMS Three-dimensional imaging and volumetric correlation Imaging methods for thermomechanics applications 3D volumetric flow measurement Applied photoelasticity Optical residual stress measurement techniques Advances in imaging technologies

Download or read book Advancements in Optical Methods Digital Image Correlation in Experimental Mechanics Volume 3 written by Ming-Tzer Lin and published by Springer Nature. This book was released on 2019-12-04 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: DIC Methods & Its Applications Photoelsticity and Interferometry ApplicationsMicro-Optics and Microscopic SystemsMultiscale and New Developments in Optical MethodsDIC and its Applications for Inverse Problems

Download or read book Advancement of Optical Methods in Experimental Mechanics Volume 3 written by Luciano Lamberti and published by Springer. This book was released on 2017-11-03 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods in Experimental Mechanics, Volume 3 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas.

Download or read book Advancement of Optical Methods Digital Image Correlation in Experimental Mechanics Volume 3 written by Luciano Lamberti and published by Springer. This book was released on 2018-10-11 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: New Developments in Optical Methods & Fringe Pattern Analysis; DIC Applications for Challenging Environments; Optical Methods in SEM: History & Perspective; Mechanical Characterization of Materials & Structures with Optical Methods; Bioengineering.

Download or read book Advancement of Optical Methods Digital Image Correlation in Experimental Mechanics written by Ming-Tzer Lin and published by Springer Nature. This book was released on 2021-03-09 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 4 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: DIC Methods & Its Applications Photoelsticity and Interferometry ApplicationsMicro-Optics and Microscopic SystemsMultiscale

Download or read book Advancement of Optical Methods in Experimental Mechanics Volume 3 written by Sanichiro Yoshida and published by Springer. This book was released on 2016-09-07 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement of Optical Methods in Experimental Mechanics, Volume 3 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: Advances in Digital Image Correlation Challenging Applications of DIC Uncertainty Analysis & Improvements to DIC Accuracy Photoelasticity, Interferometry, & Moire Methods Applications of Stereovision Inverse Methods at High Strain Rates Inverse Methods in Plasticity

Download or read book Experimental and Applied Mechanics Volume 4 written by Yong Zhu and published by Springer. This book was released on 2016-09-16 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including: Hybrid Experimental & Computational Techniques Advanced Experimental Mechanics Methods Integration of Models & Experiments Soft Materials Education & Research in Progress Applications

Download or read book Recent Advances in Theoretical Applied Computational and Experimental Mechanics written by B. N. Singh and published by Springer Nature. This book was released on 2020-04-03 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selected papers presented at the 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics. The papers come from diverse disciplines, such as aerospace, civil, mechanical, and reliability engineering, physics, and navel architecture. The contents of this volume focus on different aspects of mechanics, namely, fluid mechanics, solid mechanics, flight mechanics, control, and propulsion. This volume will be of use to researchers interested in the study of mechanics across disciplines.

Download or read book Advanced Experimental Unsaturated Soil Mechanics written by Alessandro Tarantino and published by CRC Press. This book was released on 2005-07-14 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of experimental unsaturated soil mechanics has grown considerably over the last decade. In the laboratory and in the field, innovative techniques have been introduced into mechanical, hydraulic, and geo-environmental testing. Normally, this information is widely dispersed throughout journals and conference proceedings and it is often difficult to identify suitable equipment and instrumentation for research or professional purposes. In this volume, however, the authors bring together the latest research in laboratory and field testing techniques, and the equipment employed, and examine the current state-of-the-art in a forum devoted solely to experimental unsaturated soil mechanics. The papers published in the proceedings were peer-reviewed by internationally-recognized researchers. The topics tackled by the papers include suction measurement, suction control, mechanical and hydraulic laboratory testing, geo-environmental testing, and field-testing.

Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.