Download or read book Advances in Engineering Materials and Applied Mechanics written by Guangde Zhang and published by CRC Press. This book was released on 2015-10-22 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid development of Machinery, Materials Science and Engineering Application, discussion on new ideas related mechanical engineering and materials science arise. In this proceedings volume the author(s) are focussed on Machinery, Materials Science and Engineering Applications and other related topics. The Conference has pro
Download or read book Advances in Mechanical Engineering Materials and Mechanics written by Mohamed Kharrat and published by Springer Nature. This book was released on 2020-08-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics. It describes innovative applications and research findings in applied and fluid mechanics, design and manufacturing, thermal science and materials. A number of industrially relevant recent advances are also highlighted. All papers were carefully selected from contributions presented at the International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM2019, held on December 16–18, 2019, in Hammamet, Tunisia, and organized by the Laboratory of Electromechanical Systems (LASEM) at the National School of Engineers of Sfax (ENIS) and the Tunisian Scientific Society (TSS), in collaboration with a number of higher education and research institutions in and outside Tunisia.
Download or read book Advances in Engineering Materials written by Bhupendra Prakash Sharma and published by Springer Nature. This book was released on 2021-04-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This book, in particular, focuses on characterizing materials using novel techniques. It covers a variety of advanced materials, viz. composites, coatings, nanomaterials, materials for fuel cells, biomaterials among others. The book also discusses advanced characterization techniques like X-ray photoelectron, UV spectroscopy, scanning electron, atomic power, transmission electron and laser confocal scanning fluorescence microscopy, and gel electrophoresis chromatography. This book gives the readers an insight into advanced material processes and characterizations with special emphasis on nanotechnology.
Download or read book Advances in Mechanical Engineering and Mechanics II written by Tarak Bouraoui and published by Springer Nature. This book was released on 2021-11-22 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on recent findings and applications relating to structure modeling and computation, design methodology, advanced manufacturing, mechanical behavior of materials, fluid mechanics, energy, and heat transfer. Further, it highlights cutting-edge issues in biomechanics and mechanobiology, and describes simulation and intelligent techniques applied to the control of industrial processes. Chapters are based on a selection of original peer-reviewed papers presented at the 5th International Tunisian Congress on Mechanics, COTUME, which was held on March 22–24, 2021, from Hammamet, Tunisia, in hybrid format. All in all, the book offers a good balance of fundamental research and industrially relevant applications, and an in-depth analysis of the current state of the art and challenges in various subfields of mechanical engineering; it provides researchers and professionals with a timely snapshot and a source of inspiration for future research and collaborations.
Download or read book Materials Science Applied Mechanics and Advanced Engineering Research written by Praseetha Ramakrishnan and published by Trans Tech Publications Ltd. This book was released on 2015-04-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Applied Mechanics, Materials, and Manufacturing (AMMM 2014), December 8-9, 2014, Bangkok, Thailand. The 56 papers are grouped as follows: Chapter 1: Materials Science and Technology; Chapter 2: Applied Mechanics in Area of Materials Science; Chapter 3: Applied Mechanics and Advanced Engineering Research; Chapter 4: Termal Engineering Research; Chapter 5: Design and Manufacturing Processes; Chapter 6: Computational Methods
Download or read book Engineering Materials written by K.M. Gupta and published by CRC Press. This book was released on 2014-11-13 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces Emerging Engineering Materials Mechanical, materials, and production engineering students can greatly benefit from Engineering Materials: Research, Applications and Advances. This text focuses heavily on research, and fills a need for current information on the science, processes, and applications in the field. Beginning with a brief overview, the book provides a historical and modern perspective on material science, and describes various types of engineering materials. It examines the industrial process for emerging materials, determines practical use under a wide range of conditions, and establishes what is needed to produce a new generation of materials. Covers Basic Concepts and Practical Applications The book consists of 18 chapters and covers a variety of topics that include functionally graded materials, auxetic materials, whiskers, metallic glasses, biocomposite materials, nanomaterials, superalloys, superhard materials, shape-memory alloys, and smart materials. The author outlines the latest advancements, including futuristic plastics, sandwich composites, and biodegradable composites, and highlights special kinds of composites, including fire-resistant composites, marine composites, and biomimetics. He also factors in current examples, future prospects, and the latest research underway in materials technology. Contains approximately 160 diagrams and 85 tables Incorporates examples, illustrations, and applications used in a variety of engineering disciplines Includes solved numerical examples and objective questions with answers Engineering Materials: Research, Applications and Advances serves as a textbook and reference for advanced/graduate students in mechanical engineering, materials engineering, production engineering, physics, and chemistry, and relevant researchers and practicing professionals in the field of materials science.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Mechanics of Advanced Materials written by Vadim V. Silberschmidt and published by Springer. This book was released on 2015-04-09 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc. The last decades have seen a large extension of types of materials employed in various applications. In many cases these materials demonstrate mechanical properties and performance that vary significantly from those of their traditional counterparts. Such uniqueness is sought – or even specially manufactured – to meet increased requirements on modern components and structures related to their specific use. As a result, mechanical behaviors of these materials under different loading and environmental conditions are outside the boundaries of traditional mechanics of materials, presupposing development of new characterization techniques, theoretical descriptions and numerical tools. The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc.
Download or read book Advanced Strength of Materials written by J. P. Den Hartog and published by Courier Corporation. This book was released on 2014-07-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Four decades ago, J.P. Den Hartog, then Professor of Mechanical Engineering at Massachusetts Institute of Technology, wrote Strength of Materials, an elementary text that still enjoys great popularity in engineering schools throughout the world. Widely used as a classroom resource, it has also become a favorite reference and refresher on the subject among engineers everywhere. This is the first paperback edition of an equally successful text by this highly respected engineer and author. Advanced Strength of Materials takes this important subject into areas of greater difficulty, masterfully bridging its elementary aspects and its most formidable advanced reaches. The book reflects Den Hartog's impressive talent for making lively, discursive and often witty presentations of his subject, and his unique ability to combine the scholarly insight of a distinguished scientist with the practical, problem-solving orientation of an experienced industrial engineer. The concepts here explored in depth include torsion, rotating disks, membrane stresses in shells, bending of flat plates, beams on elastic foundation, the two-dimensional theory of elasticity, the energy method and buckling. The presentation is aimed at the student who has a one-semester course in elementary strength of materials. The book includes an especially thorough and valuable section of problems and answers which give both students and professionals practice in techniques and clear illustrations of applications.
Download or read book Applied Engineering Materials and Mechanics written by Jong Wan Hu and published by Trans Tech Publications Ltd. This book was released on 2017-10-16 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proceeding contains some of the contributions presented at the second International Conference on Applied Engineering, Materials and Mechanics (ICAEMM 2017, April 14-16, 2017, Tianjin, China). In the collection are presented the newest results of researches and solutions in the field of Materials Engineering and Engineering Science.
Download or read book Advanced Mechanics of Materials and Applied Elasticity written by Ansel C. Ugural and published by Pearson Education. This book was released on 2011-06-21 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This systematic exploration of real-world stress analysis has been completely updated to reflect state-of-the-art methods and applications now used in aeronautical, civil, and mechanical engineering, and engineering mechanics. Distinguished by its exceptional visual interpretations of solutions, Advanced Mechanics of Materials and Applied Elasticity offers in-depth coverage for both students and engineers. The authors carefully balance comprehensive treatments of solid mechanics, elasticity, and computer-oriented numerical methods—preparing readers for both advanced study and professional practice in design and analysis. This major revision contains many new, fully reworked, illustrative examples and an updated problem set—including many problems taken directly from modern practice. It offers extensive content improvements throughout, beginning with an all-new introductory chapter on the fundamentals of materials mechanics and elasticity. Readers will find new and updated coverage of plastic behavior, three-dimensional Mohr’s circles, energy and variational methods, materials, beams, failure criteria, fracture mechanics, compound cylinders, shrink fits, buckling of stepped columns, common shell types, and many other topics. The authors present significantly expanded and updated coverage of stress concentration factors and contact stress developments. Finally, they fully introduce computer-oriented approaches in a comprehensive new chapter on the finite element method.
Download or read book Advances in Materials Mechanics and Manufacturing II written by Mounir Ben Amar and published by Springer Nature. This book was released on 2021-09-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.
Download or read book Advances in Materials Mechanics and Manufacturing written by Fakher Chaari and published by Springer Nature. This book was released on 2019-09-17 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.
Download or read book Mechanical and Materials Engineering of Modern Structure and Component Design written by Andreas Öchsner and published by Springer. This book was released on 2015-06-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest findings on mechanical and materials engineering as applied to the design of modern engineering materials and components. The contributions cover the classical fields of mechanical, civil and materials engineering, as well as bioengineering and advanced materials processing and optimization. The materials and structures discussed can be categorized into modern steels, aluminium and titanium alloys, polymers/composite materials, biological and natural materials, material hybrids and modern nano-based materials. Analytical modelling, numerical simulation, state-of-the-art design tools and advanced experimental techniques are applied to characterize the materials’ performance and to design and optimize structures in different fields of engineering applications.
Download or read book Handbook of Research on Advancements in Manufacturing Materials and Mechanical Engineering written by Burstein, Leonid and published by IGI Global. This book was released on 2020-09-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production, new materials development, and mechanics are the central subjects of modern industry and advanced science. With a very broad reach across several different disciplines, selecting the most forward-thinking research to review can be a hefty task, especially for study in niche applications that receive little coverage. For those subjects, collecting the research available is of utmost importance. The Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering is an essential reference source that examines emerging obstacles in these fields of engineering and the methods and tools used to find solutions. Featuring coverage of a broad range of topics including fabricating procedures, automated control, and material selection, this book is ideally designed for academics; tribology and materials researchers; mechanical, physics, and materials engineers; professionals in related industries; scientists; and students.
Download or read book Advanced Materials written by Shun-Hsyung Chang and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.
Download or read book Advances in Applied Mechanics written by and published by Academic Press. This book was released on 1998-10-29 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly acclaimed series provides survey articles on the present state and future direction of research in important branches of applied mechanics.
