Download or read book Advances on Mechanics Design Engineering and Manufacturing II written by Francisco Cavas-Martínez and published by Springer. This book was released on 2019-04-27 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Advanced Engineering Design written by Efrén M Benavides and published by Elsevier. This book was released on 2011-11-24 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and students with a general framework focusing on the processes of designing new engineering products. The procedures covered by the framework lead the reader to the best trade-offs to ensure maximum satisfaction of the customer's needs, meeting the lowest cost expectations, ensuring the lowest environmental impact and maximising profits and best positioning in the marketplace. Chapters discuss the engineering tools that are compatible with these goals and sustainable activity. - The design process is defined in terms of operators acting over the information space - The information content is defined as a difference of entropies - Creation and destruction of entropy are defined as procedures of the design process

Download or read book Advances in Design Engineering III written by Francisco Cavas-Martínez and published by Springer Nature. This book was released on 2023-02-13 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the XXXI International Congress INGEGRAF “Graphic Expression: reunion, reflection, representation,” held on June 29–30 and July 1, 2021, in Málaga, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design, innovative design and computer-aided design. Further topics covered include virtual simulation and reverse engineering, additive manufacturing, product manufacturing,engineering methods in medicine and education, representation techniques and nautical, engineering and construction, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; but also they are intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Download or read book Advances in Engineering Design written by Anamika Prasad and published by Springer. This book was released on 2019-04-27 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book covers mechanical design areas such as computational mechanics, finite element modeling, computer aided designing, tribology, fracture mechanics, and vibration. The book brings together different aspects of engineering design, and will be useful for researchers and professionals working in this field.

Download or read book Advances in Engineering Design written by Preeti Joshi and published by Springer Nature. This book was released on 2021-03-31 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). The book focuses on latest research in mechanical engineering design and covers topics such as computational mechanics, finite element modeling, computer aided engineering and analysis, fracture mechanics, and vibration. The book brings together different aspects of engineering design and the contents will be useful for researchers and professionals working in this field.

Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Advances in Design Engineering II written by Francisco Cavas Martínez and published by Springer Nature. This book was released on 2021-12-08 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the XXX International Congress INGEGRAF, “Digital Engineering, its application in Research, Development and Innovation”, held on 24–25 June 2021 in Valencia, Spain. The book reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, engineering and construction, aeronautics and aerospace design and modeling. The book has six sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers, and experts in a range of industrial engineering subfields with extensive information to support their daily work; but also they are intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Engineering Design Applications written by Andreas Öchsner and published by Springer. This book was released on 2018-05-19 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gives an overview on recent developments for various applications of modern engineering design. Different engineering disciplines such as mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by an interaction of different disciplines and a strong shift to computer-based approaches where only a few experiments are performed for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive or aerospace), this is connected with the demand for higher fuel efficiency, which is related to the operational costs and the lower harm for the environment. One way to fulfil such requirements are lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector. In this book, many examples of the mentioned design applications are presented.

Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Download or read book Advances in Design Engineering III written by Francisco Cavas-Martínez and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the XXXI International Congress INGEGRAF "Graphic Expression: reunion, reflection, representation," held on June 29-30 and July 1, 2021, in Málaga, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design, innovative design and computer-aided design. Further topics covered include virtual simulation and reverse engineering, additive manufacturing, product manufacturing,engineering methods in medicine and education, representation techniques and nautical, engineering and construction, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; but also they are intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Download or read book Managing Engineering Design written by Crispin Hales and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Features include: jargon-free language with well-tried, real-world examples; useful tips for managers at the end of each chapter; a comprehensive bibliography at the end of the book. It is also highly informative for graduate and undergraduate engineering students and ideally suited for establishing a web-based design management system for geographically dispersed teams. Changes in the second edition: New case studies. Expanded text in each chapter (about 50 new pages worth) including a wholly new chapter on the analysis of the design process as a whole.

Download or read book Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Alan Bramley and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering. This Conference has been organized within the framework of the activities of the AIP-PRIMECA network whose main scientific field is Integrated Design applied to both Mechanical Engineering and Productics. This network isorganized along the lines of a joint project: the evolution, in the field of training of Integrated Design in Mechanics and Productics, in quite close connection with the ever changing industrial needs over the past 20 years. It is in charge of promoting both exchanges of experience and know-how capitalisation. It has a paramount mission to fulfil, be it in the field of initial and continuous education, technological transfer and knowledge dissemination through strong links with research labs. For the second time, in fact, the IDMME Conference has been held abroad and, after Canada in 2000, the United Kingdom, more particularly Bath University, has been retained under the responsibility of Professor Alan Bramley, the Chairman of the Scientific Committee of the conference. The Scientific Committee members have selected all the lectures from com mplete papers, which is the guarantee for the Conference of quite an outstanding scientific level. After that, a new selection hasbeen carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Integrated Design and Manufacturing in the discipline of Mechanical Engineering.

Download or read book Design Engineering Manual written by Mike Tooley and published by Elsevier. This book was released on 2009-10-30 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Engineering Manual offers a practical guide to the key principles of design engineering. It features a compilation of extracts from several books within the range of Design Engineering books in the Elsevier collection. The book is organized into 11 sections. Beginning with a review of the processes of product development and design, the book goes on to describe systematic ways of choosing materials and processes. It details the properties of modern metallic alloys including commercial steels, cast irons, superalloys, titanium alloys, structural intermetallic compounds, and aluminum alloys. The book explains the human/system interface; procedures to assess the risks associated with job and task characteristics; and environmental factors that may be encountered at work and affect behavior. Product liability and safety rules are discussed. The final section on design techniques introduces the design process from an inventors perspective to a more formal model called total design. It also deals with the behavior of plastics that influence the application of practical and complex engineering equations and analysis in the design of products. - Provides a single-source of critical information to the design engineer, saving time and therefore money on a particular design project - Presents both the fundamentals and advanced topics and also the latest information in key aspects of the design process - Examines all aspects of the design process in one concise and accessible volume

Download or read book Advances on Mechanics Design Engineering and Manufacturing III written by Lionel Roucoules and published by Springer Nature. This book was released on 2021-04-21 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Download or read book Environmental Engineering III written by Lucjan Pawlowski and published by CRC Press. This book was released on 2010-03-23 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental engineering has a leading role in the elimination of ecological threats, and can deal with a wide range of technical and technological problems due to its interdisciplinary character. It uses the knowledge of the basic sciences biology, chemistry, biochemistry and physics to neutralize pollution in all the elements of the environm

Download or read book Engineering Design and Rapid Prototyping written by Ali K. Kamrani and published by Springer Science & Business Media. This book was released on 2010-09-02 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Engineering Design and Rapid Prototyping" offers insight into the methods and techniques that allow for easily implementing engineering designs by incorporating advanced methodologies and technologies. This book contains advanced topics such as feature-based design and process planning, modularity and rapid manufacturing, along with a collection of the latest methods and technologies currently being utilized in the field. The volume also: -Provides axiomatic design and solution methodologies for both design and manufacturing -Discusses product life cycle development and analysis for ease of manufacture and assembly -Offers applied methods and technologies in rapid prototyping, tooling and manufacturing "Engineering Design and Rapid Prototyping" will be extremely valuable for any engineers and researchers and students working in engineering design.

Download or read book Advances in Evolutionary and Deterministic Methods for Design Optimization and Control in Engineering and Sciences written by David Greiner and published by Springer. This book was released on 2014-11-14 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains state-of-the-art contributions in the field of evolutionary and deterministic methods for design, optimization and control in engineering and sciences. Specialists have written each of the 34 chapters as extended versions of selected papers presented at the International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems (EUROGEN 2013). The conference was one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). Topics treated in the various chapters are classified in the following sections: theoretical and numerical methods and tools for optimization (theoretical methods and tools; numerical methods and tools) and engineering design and societal applications (turbo machinery; structures, materials and civil engineering; aeronautics and astronautics; societal applications; electrical and electronics applications), focused particularly on intelligent systems for multidisciplinary design optimization (mdo) problems based on multi-hybridized software, adjoint-based and one-shot methods, uncertainty quantification and optimization, multidisciplinary design optimization, applications of game theory to industrial optimization problems, applications in structural and civil engineering optimum design and surrogate models based optimization methods in aerodynamic design.