Download or read book Advances in Corrosion deformation Interactions written by Thierry Magnin and published by . This book was released on 1996 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than a century, it has been observed that stress corrosion cracking (SCC) and corrosion fatigue (CF) corresponds to synergetic effects between corrosion and mechanics. Researchers and engineers have tried to translate such effects through empirical damage laws, in particular, to predict crack velocities in metallic materials for the nuclear, aeronatical and chemical industries. Nevertheless, the precise nature of those synergetic effects is still difficult to determine and quantify, mainly because of the localization of the damage events.

Download or read book Corrosion deformation Interactions CDI 96 written by Thierry Magnin and published by Woodhead Publishing Limited. This book was released on 1997 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published for: the European Federation of Corrosion.

Download or read book The Progress in Corrosion The First 50 Years of the EFC written by Paul McIntyre and published by CRC Press. This book was released on 2024-11-15 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on developments during the first fifty years of existence of the European Federation of Corrosion, and describes the contributions made by its working parties.

Download or read book Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems written by Steve Bruemmer and published by John Wiley & Sons. This book was released on 2013-10-18 with total page 1776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents an exchange of ideas among scientists and engineers about the economic and safety concerns surrounding environmentally induced materials problems which lead to nuclear power plant outages. Scientists and engineers concerned with the environmental degradation processes (corrosion, mechanical, and radiation effects) present their latest results on such topics as life extension/relicensing and materials problems associated with spent fuel storage and radioactive waste disposal. This collection will be of interest to utility engineers, reactor vendor engineers, plant architect engineers, researchers concerned with materials degradation, and consultants involved in design, construction, and operation of water reactors.

Download or read book Corrosion Mechanisms in Theory and Practice Third Edition written by Philippe Marcus and published by CRC Press. This book was released on 2011-08-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include recent results from intensive worldwide research efforts in materials science, surface science, and corrosion science, Corrosion Mechanisms in Theory and Practice, Third Edition explores the latest advances in corrosion and protection mechanisms. It presents a detailed account of the chemical and electrochemical surface reactions that govern corrosion as well as the link between microscopic forces and macroscopic behavior. Revised and expanded, this edition includes four new chapters on corrosion fundamentals, the passivity of metals, high temperature corrosion, and the corrosion of aluminum alloys. The first half of the book covers basic aspects of corrosion, such as entry of hydrogen into metals, anodic dissolution, localized corrosion, stress corrosion cracking, and corrosion fatigue. Connecting the theoretical aspects of corrosion mechanisms to practical applications in industry, the second half of the text discusses corrosion inhibition, atmospheric corrosion, microbially induced corrosion, corrosion in nuclear systems, corrosion of microelectronic and magnetic data-storage devices, and organic coatings. With contributions from leading academic and industrial researchers, this bestselling book continues to provide a thorough understanding of corrosion mechanisms—helping you solve existing corrosion challenges and prevent future problems.

Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation.This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems.With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. - Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities - Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them - Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches

Download or read book Proceedings of the International Symposium on Pits and Pores Formation Properties and Significance for Advanced Luminescent Materials written by P. Schmuki and published by The Electrochemical Society. This book was released on 1997 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Mechanisms in Theory and Practice written by Philippe Marcus and published by CRC Press. This book was released on 2002-07-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Called "a useful contribution to the current litereture on corrosion science, engineering, and technology" by Corrosion Review, this book offers real-world applications and problem-solving techniques to reduce the occurrence of pits, cracks, and deterioration in industrial, automotive, marine, and electronic structures. It details the electrochemic

Download or read book Hydrogen Effects in Materials written by Anthony W. Thompson and published by John Wiley & Sons. This book was released on 2013-09-27 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Fifth International Conference on the Effect of Hydrogen on the Behavior of Materials sponsored by the Structural Materials Division (SMD) Mechanical Metallurgy and Corrosion & Environmental Effects Committees of The Minerals, Metals & Materials Society held at Jackson Lake Lodge, Moran, Wyoming, September 11-14, 1994.

Download or read book Multiscale Phenomena in Plasticity From Experiments to Phenomenology Modelling and Materials Engineering written by Joël Lépinoux and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A profusion of research and results on the mechanical behaviour of crystalline solids has followed the discovery of dislocations in the early thirties. This trend has been enhanced by the development of powerful experimental techniques. particularly X ray diffraction. transmission and scanning electron microscopy. microanalysis. The technological advancement has given rise to the study of various and complex materials. not to speak of those recently invented. whose mechanical properties need to be mastered. either for their lise as structural materials. or more simply for detenllining their fonnability processes. As is often the case this fast growth has been diverted both by the burial of early fundamental results which are rediscovered more or less accurately. and by the too fast publication of inaccurate results. which propagate widely. and are accepted without criticism. Examples of these statements abound. and will not be quoted here for the sake of dispassionateness. Understanding the mechanical properties of materials implies the use of various experimental techniques. combined with a good theoretical knowledge of elasticity. thermodynamics and solid state physics. The recent development of various computer techniques (simulation. ab initio calculations) has added to the difficulty of gathering the experimental information. and mastering the theoretical understanding. No laboratory is equipped with all the possible experimental settings. almost no scientist masters all this theoretical kno\vledge. Therefore. cooperation between scientists is needed more than even before.

Download or read book Advances in Fracture Resistance and Structural Integrity written by V.V. Panasyuk and published by Newnes. This book was released on 2012-12-02 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Fracture (ICF8), held in Kyiv, Ukraine, attracted 550 delegates from 30 countries with over 700 papers presented. This volume contains a representative selection of 72 articles of the highest standard from internationally renowned experts in the field. Principal topics covered include: mechanics and criteria of fracture, stress-strain analysis in solids with cracks, physics and mechanics of fracture, dynamic fracture, environmental effects, temperature influence on fracture, advanced and special-purpose materials engineering applications of fracture mechanics, fracture mechanics and strength of welded joints and structures, testing techniques and failure diagnostics. For anyone working in fracture mechanics and the performance of materials, this volume provides a valuable snapshot of the major recent developments in the field.

Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-07-01 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements

Download or read book Environmentally Assisted Cracking written by R. D. Kane and published by ASTM International. This book was released on 2000 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The November 2000 symposium addressed methodologies for evaluation of environmental assisted cracking (EAC) in equipment and structures exposed to corrosive environments, and recent developments in the generation of relevant materials properties data based on laboratory tests. Twenty-seven papers fr

Download or read book Mechanics Microstructure Corrosion Coupling written by Christine Blanc and published by Elsevier. This book was released on 2019-02-19 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics - Microstructure - Corrosion Coupling: Concepts, Experiments, Modeling and Cases presents the state-of-the-art on scientific and technological developments relating to the durability of materials and structures subjected to mechanical and environmental stress in industries such as energy, aeronautics, chemistry and oil. Experimental, theoretical and numerical aspects are tackled at different scales, providing readers with the most advanced tools and scientific approaches to apprehend coupling phenomena by understanding associated mechanisms, identifying variables of the first order, and proposing strategies to control and/or extend the lifespan of structures in a multi-process coupling situation. In addition, the book presents the latest advances in research in these areas (hydrogen embrittlement, stress corrosion, fatigue, etc.), especially in the consideration of the multi-scale aspect of the phenomena in the implementation of dedicated experiments. - Reviews the status of scientific and technological developments related to the durability of materials - Addresses experimental, theoretical and numerical aspects at different scales - Provides the most advanced tools and scientific approaches - Focuses on the latest advances, such as hydrogen embrittlement, stress corrosion, fatigue, and more

Download or read book Fracture Mechanics Second Edition written by Michael Janssen and published by CRC Press. This book was released on 2004-08-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both theoretical and practical aspects of fracture mechanics and integrates materials science with solid mechanics.

Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy

Download or read book Recommended Practice for Corrosion Management of Pipelines in Oil Gas Production and Transportation written by Bijan Kermani and published by CRC Press. This book was released on 2017-12-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Pipeline integrity is key to maintaining operational success, safety and security and minimising harm to the environment. Corrosion is a dominant contributory factor to failures, leaks and integrity threats in pipelines. Therefore, its optimum control within an integrity management framework is paramount for the cost-effective design of facilities and ensuring continued, uninterrupted and safe operations within the expected design life. This recommended practice (RP) is a compendium of current best practices and state-of-the-art knowledge by major operators, engineering contractors and service companies involved in hydrocarbon pro-duction and transportation. The RP incorporates some minimum operational requirements and practices to ensure that when man-aging corrosion in pipelines, fundamental principles are followed. It covers management of corrosion for pipelines carrying hydrocarbons, injection water and/or produced water from design to decommissioning. It is structured to follow the logical steps of a basic corrosion management process and makes references to relevant and available international standards and/or recommended practices. It is intended for use by personnel from the petroleum industry having knowledge of corrosion and materials. It is hoped that this RP will prove to be a key reference document for engineers, suppliers and con-tractors working in the oil and gas industry, paving the way for corrosion-free operation of pipelines with the ultimate goal of improving safety, security and minimising the impact on the environment