Download or read book Advances in Control Technologies for Brushless Doubly fed Induction Generators written by Yi Liu and published by Springer Nature. This book was released on 2022-03-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advances in control technologies for efficient operation of the brushless doubly-fed induction generator (BDFIG). For robust and low-cost operation of BDFIGs, it is required to keep high-quality output voltage and eliminate the speed/position encoder under different loads and operation conditions. Some advanced control technologies, from the authors’ latest work on these topics, are presented to achieve this goal with simple and accurate texts, illustrations, and tables. The qualified outcomes obtained from this book assure the high-performance operation of BDFIGs and also give the readers a straight insight toward challenges in this research area in the future.

Download or read book Advances in Control Techniques for Smart Grid Applications written by Sajal Kumar Das and published by Springer Nature. This book was released on 2022-03-30 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet the increasing demand of electrical power, the use of renewable energy-based smart grid is attracting significant attention in recent years throughout the world. The high penetration of renewable power in the smart grids is growing its importance due to its non-finishing, reusable, reliable, sustainable, lower cost, and available characteristics. The renewable energy-based smart grid technology may mitigate the increasing energy demands effectively and efficiently without hampering the environment. But the uncertain nature of renewable sources largely affects the operation of the smart grid by un-stabling the voltage and frequency that may introduces power quality and reliability problems, which requires special control techniques. This book investigates the challenges in controlling renewable energy-based smart grids and proposes different control techniques to control the voltage and frequency effectively to improve the power quality and reliability of the power grids. This book is a valuable resource for readers interested in practical solutions in smart grids and renewable energy systems.

Download or read book Advanced Controls for Wind Driven Doubly Fed Induction Generators written by Mahmoud K. Abdelhamid and published by CRC Press. This book was released on 2023-12-22 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Controls for Wind Driven Doubly Fed Induction Generators discusses the most advanced control algorithms used for enhancing the dynamics of a doubly fed induction generator (DFIG) operating at fixed and variable speeds, and which are used for different utilization purposes (standalone and grid connection). Extensive generator performance analysis has been introduced using various control topologies. Features: Presents modeling of wind energy conversion systems (WECS), including a wind turbine as a prime mover, a DFIG as a generation unit for electrical energy, and a three-phase induction motor as an isolated load Explores a detailed description for the presented control algorithms in order to visualize the base principle of each method Introduces a comprehensive performance analysis for the DFIG using the formulated predictive voltage control scheme and other control techniques under different operating conditions Examines the formulation of new control approaches which overcome the shortages present in previous DFIG control schemes Presents a detailed comparison between different control topologies for the DFIG to outline the most effective procedure in terms of dynamic response, structure simplicity, ripples, total harmonic distortion, and computational burdens The book is written for researchers and academics working on advanced control systems and those interested in areas such as machine drives, renewable energy systems, 'adaptive control', modeling of WECS, and optimization theory.

Download or read book Advanced Controls for Wind Driven Doubly Fed Induction Generators written by Mahmoud K. Abdelhamid and published by CRC Press. This book was released on 2023-12-22 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Controls for Wind Driven Doubly Fed Induction Generators discusses the most advanced control algorithms used for enhancing the dynamics of a doubly fed induction generator (DFIG) operating at fixed and variable speeds, and which are used for different utilization purposes (standalone and grid connection). Extensive generator performance analysis has been introduced using various control topologies. Features: Presents modeling of wind energy conversion systems (WECS), including a wind turbine as a prime mover, a DFIG as a generation unit for electrical energy, and a three-phase induction motor as an isolated load Explores a detailed description for the presented control algorithms in order to visualize the base principle of each method Introduces a comprehensive performance analysis for the DFIG using the formulated predictive voltage control scheme and other control techniques under different operating conditions Examines the formulation of new control approaches which overcome the shortages present in previous DFIG control schemes Presents a detailed comparison between different control topologies for the DFIG to outline the most effective procedure in terms of dynamic response, structure simplicity, ripples, total harmonic distortion, and computational burdens The book is written for researchers and academics working on advanced control systems and those interested in areas such as machine drives, renewable energy systems, 'adaptive control', modeling of WECS, and optimization theory.

Download or read book Modelling Analysis and Control Aspects of a Rotating Power Electronic Brushless Doubly fed Induction Generator written by and published by . This book was released on 2015 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced technologies for planning and operation of prosumer energy systems written by Bin Zhou and published by Frontiers Media SA. This book was released on 2023-04-28 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Induction Motors Recent Advances New Perspectives and Applications written by Adel El-Shahat and published by BoD – Books on Demand. This book was released on 2023-09-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The induction motor is one of the most significant innovations in contemporary history and it officially kicked off the Second Industrial Revolution by significantly enhancing energy generation efficiency. Induction motors are utilized in a wide variety of applications in the modern industrial world. Motivated by the importance of recent advances, new perspectives, and applications of induction motors, this book presents research from distinguished experts in the field. It addresses recent advances in induction motors, optimal solutions in field-oriented control, the association of converters to induction motors, dynamic analysis, optimized design of synergetic control, fault-tolerant control, mathematical modeling, an adaptive system scheme for a sensorless drive, modeling, and simulation of a system with inter-turn faults, sensorless speed observer for industrial drives, and induction motor applications in electric vehicles. This book is useful for undergraduates, graduate students, researchers, professors, and field engineers due to its combination of both theoretical coverage and real-world application concepts.

Download or read book Design and Control of the Brushless Doubly Fed Twin Induction Generator BDFTIG Using DSPACE written by Asim Bensadeq and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Large Scale Renewable Power Generation written by Jahangir Hossain and published by Springer Science & Business Media. This book was released on 2014-01-28 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the issues of integrating large-scale renewable power generation into existing grids. The issues covered in this book include different types of renewable power generation along with their transmission and distribution, storage and protection. It also contains the development of medium voltage converters for step-up-transformer-less direct grid integration of renewable generation units, grid codes and resiliency analysis for large-scale renewable power generation, active power and frequency control and HVDC transmission. The emerging SMES technology for controlling and integrating large-scale renewable power systems is also discussed. Since the protection issues with large-scale distributed renewable power systems are different compared to the existing protection system for one way power flow, this book includes a new protection technique for renewable generators along with the inclusion of current status of smart grid. This book is a good reference for the researchers who are working the area of renewable power generation and smart grids.

Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.

Download or read book Renewable Energy Technologies written by Nayan Kumar and published by John Wiley & Sons. This book was released on 2022-09-27 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: RENEWABLE ENERGY TECHNOLOGIES With the goal of accelerating the growth of green energy utilization for the sustainability of life on earth, this volume, written and edited by a global team of experts, goes into the practical applications that can be utilized across multiple disciplines and industries, for both the engineer and the student. Green energy resources are gaining more attention in academia and industry as one of the preferred choices for sustainable energy conversion. Due to the energy demand, environmental impacts, economic needs, and social issues, green energy resources are being researched, developed, and funded more than ever before. Researchers are facing numerous challenges, but there are new opportunities waiting for green energy resource utilization within the context of environmental and economic sustainability. Efficient energy conversion from solar, wind, biomass, fuel cells, and others are paramount to this overall mission and the success of these efforts. Written and edited by a global team of experts, this groundbreaking new volume from Scrivener Publishing presents recent advances in the study of green energy across a variety of fields and sources. Various applications of green energy resources, modeling and performance analysis, and grid integration aspects of green energy resources are considered. Not only laying out the concepts in an easy-to-understand way, but this team offers the engineer, scientist, student, or other professional practical solutions to everyday problems in their daily applications. Valuable as a learning tool for beginners in this area as well as a daily reference for engineers and scientists working in these areas, this is a must-have for any library.

Download or read book Manufacturing Science and Technology ICMST2011 written by Wu Fan and published by Trans Tech Publications Ltd. This book was released on 2011-11-22 with total page 8340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The objective of ICMST 2011 was to provide a platform where researchers, engineers, academics and industrial professionals from all over the world could present their research results and discuss developments in Manufacturing Science and Technology. This conference provided opportunities for delegates to exchange new ideas and applications face-to-face, to establish business or research contacts and to find global partners for future collaboration.

Download or read book Control of Doubly fed Induction Generator for Two Application written by Jing Guo and published by . This book was released on 2012 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-05-26 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW. Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performance Fully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady state The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.

Download or read book Power Electronics Converters and their Control for Renewable Energy Applications written by Arezki Fekik and published by Elsevier. This book was released on 2023-06-21 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Converters and their Control for Renewable Energy Applications provides information that helps to solve common challenges with power electronics converters, including loss by switching, heating of power switches, management of switching time, improvement of the quality of the signals delivered by power converters, and improvement of the quality of energy produced by renewable energy sources. This book is of interest to academics, researchers, and engineers in renewable energy, power systems, electrical engineering, electronics, and mechanical engineering. - Includes important visual illustrations and imagery of concise circuit schematics and renewable energy applications - Features a templated approach for step-by-step implementation of the new MPPT algorithm based on recent and intelligent techniques - Provides methods for optimal harnessing of energy from renewable energy sources and converter topology synthesis

Download or read book Wind Driven Doubly Fed Induction Generator written by Adel Abdelbaset and published by Springer. This book was released on 2017-10-30 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a modified model reference adaptive system (MRAS) observer for sensorless vector control of a wind driven doubly fed induction generator (DFIG). A mathematical model of the DFIG as influenced by core loss and main flux saturation is developed. The authors describe and evaluate grid synchronization enhancement of a wind driven DFIG using adaptive sliding mode control (SMC). Besides, grid synchronization of a wind driven DFIG under unbalanced grid voltage is also fully covered in this book.

Download or read book Optimal Design of the Brushless Doubly fed Induction Generator written by Ashknaz Oraee and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: