Download or read book Advances in cassava genomics genetics and breeding written by Xiaofei Zhang and published by Frontiers Media SA. This book was released on 2023-06-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plant Breeding Past Present and Future written by John E. Bradshaw and published by Springer. This book was released on 2016-03-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to help plant breeders by reviewing past achievements, currently successful practices, and emerging methods and techniques. Theoretical considerations are also presented to strike the right balance between being as simple as possible but as complex as necessary. The United Nations predicts that the global human population will continue rising to 9.0 billion by 2050. World food production will need to increase between 70-100 per cent in just 40 years. First generation bio-fuels are also using crops and cropland to produce energy rather than food. In addition, land area used for agriculture may remain static or even decrease as a result of degradation and climate change, despite more land being theoretically available, unless crops can be bred which tolerate associated abiotic stresses. Lastly, it is unlikely that steps can be taken to mitigate all of the climate change predicted to occur by 2050, and beyond, and hence adaptation of farming systems and crop production will be required to reduce predicted negative effects on yields that will occur without crop adaptation. Substantial progress will therefore be required in bridging the yield gap between what is currently achieved per unit of land and what should be possible in future, with the best farming methods and best storage and transportation of food, given the availability of suitably adapted cultivars, including adaptation to climate change. My book is divided into four parts: Part I is an historical introduction; Part II deals with the origin of genetic variation by mutation and recombination of DNA; Part III explains how the mating system of a crop species determines the genetic structure of its landraces; Part IV considers the three complementary options for future progress: use of sexual reproduction in further conventional breeding, base broadening and introgression; mutation breeding; and genetically modified crops.
Download or read book Data Production and Analysis in Population Genomics written by Francois Pompanon and published by Humana Press. This book was released on 2012-05-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Population genomics is a recently emerged discipline, which aims at understanding how evolutionary processes influence genetic variation across genomes. Today, in the era of cheaper next-generation sequencing, it is no longer as daunting to obtain whole genome data for any species of interest and population genomics is now conceivable in a wide range of fields, from medicine and pharmacology to ecology and evolutionary biology. However, because of the lack of reference genome and of enough a priori data on the polymorphism, population genomics analyses of populations will still involve higher constraints for researchers working on non-model organisms, as regards the choice of the genotyping/sequencing technique or that of the analysis methods. Therefore, Data Production and Analysis in Population Genomics purposely puts emphasis on protocols and methods that are applicable to species where genomic resources are still scarce. It is divided into three convenient sections, each one tackling one of the main challenges facing scientists setting up a population genomics study. The first section helps devising a sampling and/or experimental design suitable to address the biological question of interest. The second section addresses how to implement the best genotyping or sequencing method to obtain the required data given the time and cost constraints as well as the other genetic resources already available, Finally, the last section is about making the most of the (generally huge) dataset produced by using appropriate analysis methods in order to reach a biologically relevant conclusion. Written in the successful Methods in Molecular BiologyTM series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible protocols, advice on methodology and implementation, and notes on troubleshooting and avoiding known pitfalls. Authoritative and easily accessible, Data Production and Analysis in Population Genomics serves a wide readership by providing guidelines to help choose and implement the best experimental or analytical strategy for a given purpose.
Download or read book Applied Plant Genomics and Biotechnology written by Palmiro Poltronieri and published by Woodhead Publishing. This book was released on 2015-01-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied plant genomics and biotechnology reviews the recent advancements in the post-genomic era, discussing how different varieties respond to abiotic and biotic stresses, investigating epigenetic modifications and epigenetic memory through analysis of DNA methylation states, applicative uses of RNA silencing and RNA interference in plant physiology and in experimental transgenics, and plants modified to produce high-value pharmaceutical proteins. The book provides an overview of research advances in application of RNA silencing and RNA interference, through Virus-based transient gene expression systems, Virus induced gene complementation (VIGC), Virus induced gene silencing (Sir VIGS, Mr VIGS) Virus-based microRNA silencing (VbMS) and Virus-based RNA mobility assays (VRMA); RNA based vaccines and expression of virus proteins or RNA, and virus-like particles in plants, the potential of virus vaccines and therapeutics, and exploring plants as factories for useful products and pharmaceuticals are topics wholly deepened. The book reviews and discuss Plant Functional Genomic studies discussing the technologies supporting the genetic improvement of plants and the production of plant varieties more resistant to biotic and abiotic stresses. Several important crops are analysed providing a glimpse on the most up-to-date methods and topics of investigation. The book presents a review on current state of GMO, the cisgenesis-derived plants and novel plant products devoid of transgene elements, discuss their regulation and the production of desired traits such as resistance to viruses and disease also in fruit trees and wood trees with long vegetative periods. Several chapters cover aspects of plant physiology related to plant improvement: cytokinin metabolism and hormone signaling pathways are discussed in barley; PARP-domain proteins involved in Stress-Induced Morphogenetic Response, regulation of NAD signaling and ROS dependent synthesis of anthocyanins. Apple allergen isoforms and the various content in different varieties are discussed and approaches to reduce their presence. Euphorbiaceae, castor bean, cassava and Jathropa are discussed at genomic structure, their diseases and viruses, and methods of transformation. Rice genomics and agricultural traits are discussed, and biotechnology for engineering and improve rice varieties. Mango topics are presented with an overview of molecular methods for variety differentiation, and aspects of fruit improvement by traditional and biotechnology methods. Oilseed rape is presented, discussing the genetic diversity, quality traits, genetic maps, genomic selection and comparative genomics for improvement of varieties. Tomato studies are presented, with an overview on the knowledge of the regulatory networks involved in flowering, methods applied to study the tomato genome-wide DNA methylation, its regulation by small RNAs, microRNA-dependent control of transcription factors expression, the development and ripening processes in tomato, genomic studies and fruit modelling to establish fleshy fruit traits of interest; the gene reprogramming during fruit ripening, and the ethylene dependent and independent DNA methylation changes. - provides an overview on the ongoing projects and activities in the field of applied biotechnology - includes examples of different crops and applications to be exploited - reviews and discusses Plant Functional Genomic studies and the future developments in the field - explores the new technologies supporting the genetic improvement of plants
Download or read book Plant Breeding Reviews Volume 44 written by and published by John Wiley & Sons. This book was released on 2020-11-10 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Breeding Reviews presents state-of-the-art reviews on plant genetics and the breeding of all types of crops by both traditional means and molecular methods. Many of the crops widely grown today stem from a very narrow genetic base; understanding and preserving crop genetic resources is vital to the security of food systems worldwide. The emphasis of the series is on methodology, a fundamental understanding of crop genetics, and applications to major crops.
Download or read book Cassava written by R. J. Hillocks and published by CABI. This book was released on 2002 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cassava is a major tropical tuber crop found throughout the tropics (India, Oceania, Africa and Latin America). Hitherto, there has been no single text covering all aspects of cassava biology, production and utilization. This book fills that gap, representing the first comprehensive research level overview of this main staple crop. Chapters are written by leading experts in this field from all continents. The book is suitable for those working and researching in cassava, in both developed and developing countries, as well as advanced students.
Download or read book Plant Breeding in the Omics Era written by Rodomiro Ortiz Ríos and published by Springer. This book was released on 2015-09-16 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of plant breeding has grown rapidly in the last decade with breakthrough research in genetics and genomics, inbred development, population improvement, hybrids, clones, self-pollinated crops, polyploidy, transgenic breeding and more. This book discusses the latest developments in all these areas but explores the next generation of needs and discoveries including omics beyond genomics, cultivar seeds and intellectual and property rights. This book is a leading-edge publication of the latest results and forecasts important areas of future needs and applications.
Download or read book Manual on MUTATION BREEDING THIRD EDITION written by Food and Agriculture Organization of the United Nations and published by Food & Agriculture Org.. This book was released on 2018-10-09 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides guidelines for new high-throughput screening methods – both phenotypic and genotypic – to enable the detection of rare mutant traits, and reviews techniques for increasing the efficiency of crop mutation breeding.
Download or read book Plant Genomics written by Ibrokhim Y. Abdurakhmonov and published by BoD – Books on Demand. This book was released on 2016-07-14 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant genomics aims to sequence, characterize, and study the genetic compositions, structures, organizations, functions, and interactions/networks of an entire plant genome. Its development and advances are tightly interconnected with proteomics, metabolomics, metagenomics, transgenomics, genomic selection, bioinformatics, epigenomics, phenomics, system biology, modern instrumentation, and robotics sciences. Plant genomics has significantly advanced over the past three decades in the land of inexpensive, high-throughput sequencing technologies and fully sequenced over 100 plant genomes. These advances have broad implications in every aspect of plant biology and breeding, powered with novel genomic selection and manipulation tools while generating many grand challenges and tasks ahead. This Plant genomics provides some updated discussions on current advances, challenges, and future perspectives of plant genome studies and applications.
Download or read book Translational Genomics for Crop Breeding Volume 1 written by Rajeev Varshney and published by John Wiley & Sons. This book was released on 2013-12-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genomic Applications for Crop Breeding: Biotic Stress is the first of two volumes looking at the latest advances in genomic applications to crop breeding. This volume focuses on genomic-assisted advances for improving economically important crops against biotic stressors, such as viruses, fungi, nematodes, and bacteria. Looking at key advances in crops such as rice, barley, wheat, and potato amongst others, Genomic Applications for Crop Breeding: Biotic Stress will be an essential reference for crop scientists, geneticists, breeders, industry personnel and advanced students in the field.
Download or read book Genome Engineering for Crop Improvement written by Bidyut Kumar Sarmah and published by Springer Nature. This book was released on 2021-04-18 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves the teachers, researchers and the students as a handy and concise reference as well as guidebook while designing and planning for use of the advanced technologies for crop improvement. The content of the book is designed to cover the latest genome engineering techniques for crop improvement. The conventional breeding has got its limitations such as non-availability of desired genes within the genepool. In many cases, breeding has been highly used and it has nearly reached its highest limit so far as the productivity and production of crops are concerned. However, with increasing need of food and decreasing resources, including water, land, labour, etc., to feed the growing population, the alternative available ways of increasing crop productivity need to be explored and exploited. Genome engineering has a wide scope that includes technologies such as genetic engineering and transgenesis, RNA technologies, CRISPR, cisgenics and subgenics for better productivity and more efficient biotic and abiotic stress management. Therefore, the book is planned to enlighten the readers with the advanced technologies with examples and case studies, whenever possible. Efforts will be made to emphasize on general efforts on various major food crops; however, it would also be made clear that such efforts could be taken as proofs of concepts and that this could be extrapolated keeping the demand in mind.
Download or read book Pulses Sugar and Tuber Crops written by Chittaranjan Kole and published by Springer Science & Business Media. This book was released on 2007-01-20 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulses, Sugar and Tuber Crops comprises reviews contributed by 47 eminent scientists from 10 countries. The chapters on common bean, pea, cowpea, sugarcane and potato include comprehensive reviews of voluminous research findings. Fundamental aspects and molecular results are also presented for eight ‘orphan crops’ of high agroeconomic importance including mungbean, lentil, chickpea, lathyrus, pigeonpea, sweet potato, cassava and yam. works on quinoa and Bambara groundnut are reviewed for the first time.
Download or read book Molecular Approaches to Crop Improvement written by Elizabeth S. Dennis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plant genes were first isolated only some twelve years ago and transfer of foreign DNA into tobacco cells first demonstrated some eight years ago, the application and extension of biotechnology to agricultural problems has already led to the field-testing of genetically modified crop plants. The promise of tailor-made plants containing resistance to pests or diseases as well as many other desirable characteristics has led to the almost compulsory incorporation of molecular biology into the research programs of chemical and seed companies as well as Governmental agricultural agencies. With the routine transformation of rice and the early evidence of transformation of maize the possibility of the world's major cereal crops being modified for improved nutritional value or resistance characteristics is now likely in the next few years. The increasing number of cloned plant genes and the increasing sophistication of our knowledge of the major developmental and biochemi cal pathways in plants should eventually allow us to engineer crop plants with higher yields and with less detrimental impact on the environment than now occurs in our current high input agricultural systems. This book draws together many of the expanding areas of plant molecular biology and genetic engineering that will make a substantial contribution to the development of the more productive and efficient crop plants that the world's farmers will be planting in the next decade.
Download or read book Advances in Plant Breeding Strategies Breeding Biotechnology and Molecular Tools written by Jameel M. Al-Khayri and published by Springer. This book was released on 2016-02-02 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basic concept of this book is to examine the use of innovative methods augmenting traditional plant breeding towards the development of new crop varieties under different environmental conditions to achieve sustainable food production. This book consists of two volumes: Volume 1 subtitled Breeding, Biotechnology and Molecular Tools and Volume 2 subtitled Agronomic, Abiotic and Biotic Stress Traits. This is Volume 1 which consists of 21 chapters covering domestication and germplasm utilization, conventional breeding techniques and the role of biotechnology. In addition to various biotechnological applications in plant breeding, it includes functional genomics, mutations and methods of detection, and molecular markers. In vitro techniques and their applications in plant breeding are discussed with an emphasis on embryo rescue, somatic cell hybridization and somaclonal variation. Other chapters cover haploid breeding, transgenics, cryogenics and bioinformatics.
Download or read book Current advances in genomics and gene editing tools for crop improvement in a changing climate scenario written by Vijay Rani Rajpal and published by Frontiers Media SA. This book was released on 2023-07-10 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book Biotechnologies for Plant Mutation Breeding written by Joanna Jankowicz-Cieslak and published by Springer. This book was released on 2016-12-08 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY-NC 2.5 license. This book offers 19 detailed protocols on the use of induced mutations in crop breeding and functional genomics studies, which cover topics including chemical and physical mutagenesis, phenotypic screening methods, traditional TILLING and TILLING by sequencing, doubled haploidy, targeted genome editing, and low-cost methods for the molecular characterization of mutant plants that are suitable for laboratories in developing countries. The collection of protocols equips users with the techniques they need in order to start a program on mutation breeding or functional genomics using both forward and reverse-genetic approaches. Methods are provided for seed and vegetatively propagated crops (e.g. banana, barley, cassava, jatropha, rice) and can be adapted for use in other species.
