Download or read book Advances in Abrasive Based Machining and Finishing Processes written by S. Das and published by Springer Nature. This book was released on 2020-05-10 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the advances in abrasive based machining and finishing in broad sense. Specifically, the book covers the novel machining and finishing strategies implemented in various advanced machining processes for improving machining accuracy and overall quality of the product. This book presents the capability of advanced machining processes using abrasive grain. It also covers ways for enhancing the production rate as well as quality. It fulfills the gap between the production of any complicated components and successful machining with abrasive particles.

Download or read book Tribology of Abrasive Machining Processes written by Ioan D. Marinescu and published by William Andrew. This book was released on 2012-12-07 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws upon the science of tribology to understand, predict and improve abrasive machining processes. Pulling together information on how abrasives work, the authors, who are renowned experts in abrasive technology, demonstrate how tribology can be applied as a tool to improve abrasive machining processes. Each of the main elements of the abrasive machining system are looked at, and the tribological factors that control the efficiency and quality of the processes are described. Since grinding is by far the most commonly employed abrasive machining process, it is dealt with in particular detail. Solutions are posed to many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid wheel wear, vibrations, work-piece burn and high process costs. This practical approach makes this book an essential tool for practicing engineers. Uses the science of tribology to improve understanding and of abrasive machining processes in order to increase performance, productivity and surface quality of final products A comprehensive reference on how abrasives work, covering kinematics, heat transfer, thermal stresses, molecular dynamics, fluids and the tribology of lubricants Authoritative and ground-breaking in its first edition, the 2nd edition includes 30% new and updated material, including new topics such as CMP (Chemical Mechanical Polishing) and precision machining for micro-and nano-scale applications

Download or read book Advances in Abrasive Processes written by Xi Peng Xu and published by Trans Tech Publications Ltd. This book was released on 2001-06-27 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Extensive research during the past 30 years has provided a relatively complete understanding of the many diverse aspects of abrasive processes which are suitable for the final machining of components that require smooth surfaces and precise tolerances. Although widely used in industry, abrasive treatments remain perhaps the least understood of all machining processes. Advances in the field of abrasive processes are therefore of great fundamental and practical interest.

Download or read book Machining with Abrasives written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2010-11-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive machining is one of the most important processes used in manufacturing engineering to remove unwanted material and to obtain the desired geometry and surface quality. Abrasive machining processes are processes where material is removed from a work piece using a multitude of hard angular abrasive particles or grains which may or may not be bonded to form a tool. Abrasive Machining discusses the fundamentals and advances in the abrasive machining processes, and provides a complete overview of the newly developing areas in the field including but not limited to, high efficiency deep grinding and micro and nanogrinding.

Download or read book Advances in Grinding and Abrasive Processes written by Xi Peng Xu and published by Trans Tech Publications Ltd. This book was released on 2004-03-15 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains selected papers from the 12th Grinding and Machining Conference, held in China (GMC 2003). Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection presents a selection of over 250 papers, submitted to the conference by many universities and industrial concerns. All of the papers were subjected to peer-review by at least two expert referees. Moreover, fifteen papers on high-speed machining were specially selected by Dr. Ning He, a full professor at Nanjing University of Aeronautics and Astronautics (NUAA), from papers submitted to the International Conference on High Speed Machining, which is organized by the NUAA and will be held in Nanjing from March 31st to April 2nd, 2004. These papers have been selected for the present volume because of their quality and the fact that they cover the main topics of the conference.

Download or read book Advances in Abrasive Processes written by Xipeng Xu and published by . This book was released on 2001 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive research during the past 30 years has provided a relatively complete understanding of the many diverse aspects of abrasive processes which are suitable for the final machining of components that require smooth surfaces and precise tolerances. Although widely used in industry, abrasive treatments remain perhaps the least understood of all machining processes. Advances in the field of abrasive processes are therefore of great fundamental and practical interest.

Download or read book Advances in Abrasive Technology XVI written by Julong Yuan and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).Abrasive machining is one kind of old technology, but it has a far-reaching impact on a broad spectrum of industries. In particular modern manufacturing, there is an ever increasing demand of advanced abrasive technology and other precision abrasive technology. The collection brings together both academic researchers and practitioners from around the world for interchange of the latest developments.The 123 papers are grouped as follows: 1: Abrasive Jet Machining; 2: Abrasive Machining; 3: Advanced Cutting Technology; 4: Brittle Material Machining; 5: CMP and Silicon Wafer Processing; 6: Coolants and Cooling; 7: Design, Fabrication and Analysis of Devices for the Applications of Abrasive Technologies; 8: EDM, Ultrasonic Machining, and Laser Machining; 9: Finishing, Lapping and Polishing; 10: Glass Molding and Related Topics; 11: Grinding Wheel and Abrasive Grain Technologies; 12: In-Process Measurement and Monitoring, Metrology; 13: Machine Tools and Systems, Tooling Processing; 14: Micro/Nano-Machining; 15: Surface Integrity and Materials Characterization; 16: Tribology in Manufacturing; 17: Truing, Dressing and ELID.

Download or read book Tribology and Fundamentals of Abrasive Machining Processes written by Bahman Azarhoushang and published by William Andrew. This book was released on 2021-11-10 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition draws upon the fundamentals of abrasive machining processes and the science of tribology to understand, predict, and improve abrasive machining processes. Each of the main elements of the abrasive machining system is looked at alongside the tribological factors that control the efficiency and quality of the processes described. The new edition has been updated to include a variety of industrial applications. Grinding and conditioning of grinding tools are dealt with in particular detail, and solutions are proposed for many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid tool wear, vibrations, workpiece burn, and high process costs. The entire book has been rewritten and restructured, with ten completely new chapters. Other new features include: - Extensive explanations of the main abrasive machining processes such as grinding (including reciprocating and creep-feed grinding, high-speed high-efficiency deep grinding, external and internal cylindrical grinding, and centerless grinding), honing, superfinishing, lapping, polishing, and finishing - Discussions of the new classes of abrasives, abrasive tools, and bonding materials - New case studies and troubleshooting on the most common grinding practices - New coverage on grinding tool conditioning, mechanical dressing, and nonmechanical dressing processes - Detailed explanations of the effects of process input parameters (such as cutting parameters, workpiece material and geometry, and abrasive tools) on process characteristics, workpiece quality, tool wear, and process parameters (such as cutting forces and temperature as well as achievable material removal rate) - Updated topics regarding process fluids for abrasive machining and fluid delivery

Download or read book Machines Advances and Trends in Non conventional Abrasive and Precision Machining written by Mariusz Deja and published by MDPI. This book was released on 2021-09-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work included in this book pertains to advanced abrasive and nonconventional machining processes. These processes are at the forefront of modern technology, with significant practical significance. Their importance is also made clear by the case studies that are included in the research that is presented in the book, pertaining to important materials and high-end applications. However, the particularities of these manufacturing processes need to be further investigated and the processes themselves need to be optimized. This is conducted in the presented works with significant experimental and modeling work, incorporating modern tools of analysis and measurements.

Download or read book Advances in Abrasive Technology XIII written by Yunn-Shiuan Liao and published by Trans Tech Publications. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).Abrasive machining is one of the oldest technologies, and continues to have a far-reaching impact on a broad spectrum of industries. In particular, there is an ever-increasing demand by modern manufacturing for advanced abrasive techniques and other precision machining technologies. As well as abrasive-related technologies, electrical discharge machining (EDM), glass molding, machine tool systems, green manufacturing, laser-beam machining, tribology, advanced cutting methods, etc. are addressed here. The more than 167 presentations contributed by workers from all over the world will make this volume essential reading. The annual conferences allow academic researchers and industrial practitioners to trade insights and questions regarding abrasive machining and its applications. Nearly 200 selected and peer-reviewed papers from the latest sitting consider such areas as abrasive jet machining, advanced cutting technology, brittle material machining, chemical mechanical polishing and silicon wafer processing, coolants and cooling, ultrasonic machining and laser machining, eco-machining, glass molding, grinding wheel and abrasive grain technologies, high-speed and high-efficiency machining, in-process measurement and monitoring, metrology, machine tools and systems, tooling processing, micro-machining and nano-machining, surface integrity and materials characterization, tribology in manufacturing, and other topics. Most of the papers include high quality monochrome illustrations.

Download or read book Advances in Abrasive Technology IX written by Dong Ming Guo and published by Trans Tech Publications Ltd. This book was released on 2007-01-15 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wealth of valuable up-to-date information for active researchers and engineers, and will certainly form a solid basis for any future research, in the field of abrasive technology, which is aimed at creating new and practical machine tools, systems and processes, or at identifying new characteristics.

Download or read book Advances in Abrasive Technology XV written by Y.F. Zhang and published by Trans Tech Publications Ltd. This book was released on 2012-09-28 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This book brings together the latest developments in, and applications of, abrasive technology. The topics covered include: grinding and grinding wheels, truing and dressing techniques for grinding wheels, finishing, lapping, honing and polishing, abrasive-jet machining, advances in machining technologies, micro/nano-fabrication, as well as other novel technologies and advanced studies relevant to abrasive technology and precision manufacturing. This work will represent an invaluable reference source for professionals in the precision manufacturing field who wish to keep abreast of state-of-the-art developments in abrasive technology and who are interested in understanding further the fundamentals of this discipline.

Download or read book Advances in Abrasive Technology XIV written by Taghi Tawakoli and published by Trans Tech Publications Ltd. This book was released on 2011-08-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Abrasive technology is the most important aspect of precision technology. A total of 117 full-color papers are to be found in this book. Developments in precision turning, milling, and drilling, machining of difficult-to-cut materials, such as chromium-nickel alloys, titanium alloys, carbides and ceramics, and glass are addressed. In addition, special processes of precision technology, including polishing, lapping, jet-machining, magnetic finishing, micro and nano-machining, machine-tool design, silicon wafers and spinning, are presented. This work is a handy guide to the state of the art.

Download or read book Progress in Abrasive and Grinding Technology written by Xipeng Xu and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The grinding and abrasive processing of materials are machining techniques which use bonded or loose abrasives to remove material from workpieces. Due to the well-known advantages of grinding and abrasive processes, advances in abrasive and grinding technology are always of great import in enhancing both productivity and component quality. In order to highlight the recent progress made in this field, the editor invited 21 world-wide contributions with the aim of gathering together all of the achievements of leading researchers into a single publication. The authors of the 21 invited papers, of both review and research type, therefore hail from Australia, China, Germany, Japan, Singapore, Taiwan (China), UK and the USA. The abrasive processes covered by this volume include not only grinding and polishing, but also wire-sawing and abrasive water-jet machining. The topics covered address both fundamental aspects and novel techniques. It is therefore certain that this volume will be invaluable to production and research engineers, research students and academics working in this area.

Download or read book Advances in Abrasive Technology XII written by Han Huang and published by Trans Tech Publications. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive technologies are central to modern manufacturing as applied to a wide variety of products covering many disciplines: from nanoscale components to large-scale equipment, and from biomedical devices to aerospace structures. This this title brings together the advances in, and applications of, abrasive technologies.

Download or read book Advances in Abrasive Technology XI written by Tsunemoto Kuriyagawa and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).Abrasive technology concerns manufacturing processes that involve the use of abrasives in various forms. It has a long history; originating right from the first discovery of minerals. With increasingly stringent requirements for the production of high-precision and high surface-quality components, in applications such as silicon wafers for the semiconductor industry and optical lenses for the precision instrument industry, abrasive technology is becoming an increasingly important factor in precision manufacturing. An understanding of the mechanisms of abrasive technology ensures the soundness and integrity of current component manufacture, as well as leading to the development of new and effective techniques. This volume comprises a collection of 88 selected papers, contributed by experts from all over the world and subjected to rigorous peer-review and revision in order to ensure originality and quality. The topics covered include new developments and applications in grinding, polishing, CMP, silicon-wafer processing and field-assisted abrasive machining technologies, plus novel techniques and new insights into dressing and truing for grinding processes and, in addition, abrasive-jet processing. It also covers further topics which are relevant to precision manufacturing: including the nano-processing of brittle materials, precision measurements and evaluation of high-precision components, micro-fabrication, and advanced machining technologies such as ecological and high-speed machining.This book therefore provides an invaluable up-to-date reference work for researchers in the abrasive technology field who wish to understand, in depth, the underlying mechanisms and to create new and practical technologies, systems and processes. It will also be particularly useful for practising engineers in precision manufacturing who are responsible for maintaining efficient and effective operations. Abrasive technology is important in precision manufacturing applications such as silicon wafers and optical lenses. This volume collects 88 peer-reviewed papers in the field, by experts from around the world. The topics covered include new developments and applications in grinding, polishing, and abrasive machining technologies, plus novel techniques in dressing and truing for grinding processes and abrasive-jet processing. Other topics covered relevant to precision manufacturing include the nano-processing of brittle materials, precision measurements and evaluation of high-precision components, micro-fabrication, and advanced machining technologies such as ecological and high-speed machining. B&w images are included. The book will be useful as a reference for researchers in abrasive technology, and for practicing engineers in precision manufacturing. Kuriyagawa is affiliated with Tohoku University, Japan.

Download or read book Advances In Abrasive Technology Proceedings Of The International Symposium written by Liangchi Zhang and published by World Scientific. This book was released on 1997-06-16 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to promote the latest advances in abrasive technology. Emphasis is placed on both the development of practical methods and the understanding of the mechanisms of machining ceramics, semiconductors, steel alloys, and other advanced materials. About 50 technical papers are included in the volume, describing the recent advances in the mechanics of abrasive machining, mechanisms of grinding, difficult-to-machine materials, grinding wheel technology, machinery and measurement, polishing, lapping, and nano-machining. Theoretically, the book discusses the material removal and deformation mechanisms; from the practical point of view, it provides useful data for direct industrial applications.