EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Advanced Materials and Techniques for Biosensors and Bioanalytical Applications

Download or read book Advanced Materials and Techniques for Biosensors and Bioanalytical Applications written by Pranab Goswami and published by CRC Press. This book was released on 2020-11-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioanalytical science and its technological subdomain, biosensors, are ever-evolving subjects, striving for rapid improvement in terms of performance and expanding the target range to meet the vast societal and market demands. The key performance factors for a biosensor that drive the research are selectivity, sensitivity, response time, accuracy, and reproducibility, with additional requirements of its portability and inexpensive nature. These performance factors are largely governed by the materials and techniques being used in these bioanalytical platforms. The selection of materials to meet these requirements is critical, as their interaction or involvement with the biological recognition elements should initiate or improve these performance factors. The technique discussed primarily applies to transducers involved in converting a biochemical signal to optical or electrical signals. Over the years, the emergence of novel materials and techniques has drastically improved the performance of these bioanalytical systems, enabling them to expand their analytical horizon. These advanced materials and techniques are central to modern bioanalytical and biosensor research. Advanced Materials and Techniques for Biosensors and Bioanalytical Applications provides a comprehensive review of the subject, including a knowledge platform for both academics and researchers. Considering biosensors as a central theme to this book, an outline on this subject with background principles has been included, with a scope of extending the utility of the book to coursework in graduate and postgraduate schools. Features: • Basic principles on different classes of biosensors, recent advances and applications • Smart materials for biosensors and other rapid, portable detection devices • Metal nanoparticles and nanocrystals for analytical applications • Carbon-based nanoparticles and quantum dots for sensing applications • Nanozymes as potential catalysts for sensing applications • Bioelectrochemiluminescence and photoelectrochemical-based biosensors • Paper electronics and paper-based biosensors • Microbial biosensors: artificial intelligence, genetic engineering, and synthetic biology • Biofuel cells as a signal transduction platform • FET-based biosensors, including ISFET and BioFET This book serves as a reference for scientific investigators and a textbook for a graduate-level course in biosensors and advanced bioanalytical techniques.

Book Immobilization Strategies

Download or read book Immobilization Strategies written by Anuj Tripathi and published by Springer. This book was released on 2021-10-29 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delves into the field of immobilizing biologically active and non-active molecules. It discusses the designing strategy of immobilization and the current state-of-the-art applications for advancing biomedical, agricultural, environmental and industrial practices. It focuses on aspects ranging from fundamental principles to current technological advances at multi-scale levels (macro, micro, and nano) which are suitable for cell, enzyme, and nano-catalyst based applications. Written by experts from across the globe, the contents deal with illustrated examples of molecular and cellular interactions with materials/scaffolds and discussions on factors that can affect the functionality and yield of the process. With its discussions on material science, design of delivery vehicles, separation science, additive manufacturing, agriculture and environmental science, this book will be a useful reference for researchers across multiple disciplines.

Book Nanostructured Materials

Download or read book Nanostructured Materials written by T. Daniel Thangadurai and published by Springer Nature. This book was released on 2020-02-27 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the early stages of the development of nanostructures, including synthesis techniques, growth mechanisms, the physics and chemistry of nanostructured materials, various innovative characterization techniques, the need for functionalization and different functionalization methods as well as the various properties of nanostructured materials. It focuses on the applications of nanostructured materials, such as mechanical applications, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, as well as piezoelectric, agriculture, biomedical and, environmental remediation applications, and anti-microbial and antibacterial properties. Further, it includes a chapter on nanomaterial research developments, highlighting work on the life-cycle analysis of nanostructured materials and toxicity aspects.

Book Solid State Chemical Sensors

Download or read book Solid State Chemical Sensors written by Jiri Janata and published by Academic Press. This book was released on 2012-12-02 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Chemical Sensors reviews the basic chemical and physical principles involved in the construction and operation of solid state sensors. A major portion of the book is devoted to explanation of the basic mechanism of operation and the many actual and potential applications of field effect transistors for gas and solution sensing. This text is comprised of four chapters; the first of which describes the basics of device fabrication. Emphasis is placed on the physical description of semiconductor devices with catalytic metal gates, along with their drawbacks and their promise. The behavior of hydrogen in the Pd-SiO2 system is also considered, and some applications of hydrogen-sensitive transistors, such as smoke detection and biochemical reaction monitoring, are described. The second chapter focuses on chemically sensitive field effect transistors and their thermodynamics, while the third chapter explains the general fabrication procedure for solid state chemical sensors. The final chapter introduces the reader to piezoelectric and pyroelectric chemical sensors, paying particular attention to the sensor nature of piezoelectricity, the piezoelectric gravimetric sensor, and pyroelectric gas analysis. This book is intended to assist electrical engineers in understanding the chemistry involved in the construction and operation of solid state sensors and to educate chemists in solid state science.

Book Handbook of Surface Plasmon Resonance

Download or read book Handbook of Surface Plasmon Resonance written by Richard B. M. Schasfoort and published by Royal Society of Chemistry. This book was released on 2017-05-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface plasmon resonance (SPR) plays a dominant role in real-time interaction sensing of biomolecular binding events, this book provides a total system description including optics, fluidics and sensor surfaces for a wide researcher audience.

Book Surface Enhanced Raman Spectroscopy

Download or read book Surface Enhanced Raman Spectroscopy written by Sebastian Schlücker and published by John Wiley & Sons. This book was released on 2011-09-19 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering everything from the basic theoretical and practical knowledge to new exciting developments in the field with a focus on analytical and life science applications, this monograph shows how to apply surface-enhanced Raman scattering (SERS) for solving real world problems. From the contents: * Theory and practice of SERS * Analytical applications * SERS combined with other analytical techniques * Biophysical applications * Life science applications including various microscopies Aimed at analytical, surface and medicinal chemists, spectroscopists, biophysicists and materials scientists. Includes a Foreword by the renowned Raman spectroscopist Professor Wolfgang Kiefer, the former Editor-in-Chief of the Journal of Raman Spectroscopy.

Book Electrochemical Biosensors

Download or read book Electrochemical Biosensors written by Serge Cosnier and published by CRC Press. This book was released on 2015-01-26 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since four decades, rapid detection and monitoring in clinical and food diagnostics and in environmental and biodefense have paved the way for the elaboration of electrochemical biosensors. Thanks to their adaptability, ease of use in relatively complex samples, and their portability, electrochemical biosensors now are one of the mainstays of analy

Book Nanomaterials for Biosensors

Download or read book Nanomaterials for Biosensors written by Bansi D. Malhotra and published by William Andrew. This book was released on 2017-10-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Biosensors: Fundamentals and Applications provides a detailed summary of the main nanomaterials used in biosensing and their application. It covers recent developments in nanomaterials for the fabrication of biosensor devices for healthcare diagnostics, food freshness and bioprocessing. The various processes used for synthesis and characterization of nanostructured materials are examined, along with the design and fabrication of bioelectronic devices using nanostructured materials as building blocks. Users will find the fundamentals of the main nanomaterials used in biosensing, helping them visualize a systematic and coherent picture of how nanomaterials are used in biosensors. The book also addresses the role of bio-conjugation of nanomaterials in the construction of nano-biointerfaces for application in biosensors. Such applications, including metal nanoparticles, metal oxide nanoparticles, nanocomposites, carbon nanotubes, conducting polymers and plasmonic nanostructures in biosensing are discussed relative to each nanomaterial concerned. Finally, recent advancements in protein functionalized nanomaterials for cancer diagnostics and bio-imaging are also included. - Provides a detailed study on how nanomaterials are used to enhance sensing capabilities in biosensors - Explains the properties, characterization methods and preparation techniques of the nanomaterials used in biosensing - Arranged in a material-by-material way, making it clear how each nanomaterial should be used

Book Smart Sensors for Environmental and Medical Applications

Download or read book Smart Sensors for Environmental and Medical Applications written by Hamida Hallil and published by John Wiley & Sons. This book was released on 2020-05-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to the topic of smart chemical sensors, along with an overview of the state of the art based on potential applications This book presents a comprehensive overview of chemical sensors, ranging from the choice of material to sensor validation, modeling, simulation, and manufacturing. It discusses the process of data collection by intelligent techniques such as deep learning, multivariate analysis, and others. It also incorporates different types of smart chemical sensors and discusses each under a common set of sub-sections so that readers can fully understand the advantages and disadvantages of the relevant transducers—depending on the design, transduction mode, and final applications. Smart Sensors for Environmental and Medical Applications covers all major aspects of the field of smart chemical sensors, including working principle and related theory, sensor materials, classification of respective transducer type, relevant fabrication processes, methods for data analysis, and suitable applications. Chapters address field effect transistors technologies for biological and chemical sensors, mammalian cell–based electrochemical sensors for label-free monitoring of analytes, electronic tongues, chemical sensors based on metal oxides, metal oxide (MOX) gas sensor electronic interfaces, and more. Addressing the limitations and challenges in obtaining state-of-the-art smart biochemical sensors, this book: Balances the fundamentals of sensor design, fabrication, characterization, and analysis with advanced methods Categorizes sensors into sub-types and describes their working, focusing on prominent applications Describes instrumentation and IoT networking methods of chemical transducers that can be used for inexpensive, accurate detection in commercialized smart chemical sensors Covers monitoring of food spoilage using polydiacetylene- and liposome-based sensors; smart and intelligent E-nose for sensitive and selective chemical sensing applications; odor sensing system; and microwave chemical sensors Smart Sensors for Environmental and Medical Applications is an important book for senior-level undergraduate and graduate students learning about this high-performance technology and its many applications. It will also inform practitioners and researchers involved in the creation and use of smart sensors.

Book Immunoenzymatic Techniques

Download or read book Immunoenzymatic Techniques written by S. Avrameas and published by Elsevier Science & Technology. This book was released on 1983 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aandacht voor de enzymatische-immunocytochemie met de nadruk op intracellulaire penetratie van gelabelde antilichamen en de toepassing van "double staining"-methodes of monoclonale antilichamen in normale en in diverse experimentele of pathologische omstandigheden; kwantitatieve aspecten van immuno-enzymatische technieken, zoals nieuwe technische vindingen en toepassingen op verschillende gebieden, bijvoorbeeld biologie, humane en veterinaire geneeskunde, fytopathologie en experimentele ziekten

Book Radiative Decay Engineering

    Book Details:
  • Author : Chris D. Geddes
  • Publisher : Springer Science & Business Media
  • Release : 2007-12-11
  • ISBN : 0387276173
  • Pages : 476 pages

Download or read book Radiative Decay Engineering written by Chris D. Geddes and published by Springer Science & Business Media. This book was released on 2007-12-11 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: During recent years our enthusiasm for this field has continually increased. This book presents expert contributions describing the fundamental principles for the widespread use of radiative decay engineering in the biological sciences and nanotechnology.

Book Principles of Surface Enhanced Raman Spectroscopy

Download or read book Principles of Surface Enhanced Raman Spectroscopy written by Eric Le Ru and published by Elsevier. This book was released on 2008-11-17 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: SERS was discovered in the 1970s and has since grown enormously in breadth, depth, and understanding. One of the major characteristics of SERS is its interdisciplinary nature: it lies at the boundary between physics, chemistry, colloid science, plasmonics, nanotechnology, and biology. By their very nature, it is impossible to find a textbook that will summarize the principles needed for SERS of these rather dissimilar and disconnected topics. Although a basic understanding of these topics is necessary for research projects in SERS with all its many aspects and applications, they are seldom touched upon as a coherent unit during most undergraduate studies in physics or chemistry. This book intends to fill this existing gap in the literature. It provides an overview of the underlying principles of SERS, from the fundamental understanding of the effect to its potential applications. It is aimed primarily at newcomers to the field, graduate students, researchers or scientists, attracted by the many applications of SERS and plasmonics or its basic science. The emphasis is on concepts and background material for SERS, such as Raman spectroscopy, the physics of plasmons, or colloid science, all of them introduced within the context of SERS, and from where the more specialized literature can be followed. - Represents one of very few books fully dedicated to the topic of surface-enhanced Raman spectroscopy (SERS) - Gives a comprehensive summary of the underlying physical concepts around SERS - Provides a detailed analysis of plasmons and plasmonics

Book Biointerface Engineering  Prospects in Medical Diagnostics and Drug Delivery

Download or read book Biointerface Engineering Prospects in Medical Diagnostics and Drug Delivery written by Pranjal Chandra and published by Springer Nature. This book was released on 2020-07-21 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed information on the surface and surface chemistry of various biointerfaces for the understanding and development of biosensors, biocompatible devices, and drug delivery systems. It highlights the role of interfacial phenomena towards the behaviour of biomolecules on different surfaces and their significance in recent applications. The book also addresses various surface engineering techniques for the modification of biomaterials that are implemented for improving biocompatibility. It provides an updated scientific concept of various interactions of biological systems with surfaces/modified surfaces at the molecular and cellular level. The chapters include various in-vitro, in-vivo, ex-vivo models to illustrate various aspects of Biointerface Engineering. Finally, the book elucidates troubleshooting strategies and future prospects of Biointerface Engineering in Medical Diagnostics and Drug Delivery.

Book Chemical and Biochemical Applications

Download or read book Chemical and Biochemical Applications written by Pierre Laszlo and published by Elsevier. This book was released on 2012-12-02 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: NMR of Newly Accessible Nuclei, Volume 1: Chemical and Biochemical Applications is a 10-chapter text that explores the properties, advantages, developments, and chemical and biochemical applications of NMR technique. This book describes first the operation of an NMR spectrometer under its two aspects, namely, the instrumental and the computational aspects. The next chapters are devoted to some of the most important pulse sequences. The discussion then shifts to the various factors determining the position of the observed absorption and those responsible for the various relaxation processes. The last chapters deal with the specific applications of NMR, including in cation salvation, calcium-binding proteins, polyelectrolyte systems, halogens, and antibiotic ionophores. This book is of value to inorganic and analytical chemists, and biophysicists.

Book Nanobiosensors

    Book Details:
  • Author : Aiguo Wu
  • Publisher : John Wiley & Sons
  • Release : 2020-06-02
  • ISBN : 3527345108
  • Pages : 412 pages

Download or read book Nanobiosensors written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing cutting edge research on the hot topic of nanobiosensor, this book will become highly read Biosensor research has recently re-emerged as most vibrant area in recent years particularly after the advent of novel nanomaterials of multidimensional features and compositions. Nanomaterials of different types and striking properties have played a positive role in giving the boost and accelerated pace to biosensors development technology. Nanobiosensors - From Design to Applications covers several aspects of biosensors beginning from the basic concepts to advanced level research. It will help to bridge the gap between various aspects of biosensors development technology and applications. It covers biosensors related material in broad spectrum such as basic concepts, biosensors & their classification, biomarkers & their role in biosensors, nanostructures-based biosensors, applications of biosensors in human diseases, drug detection, toxins, and smart phone based biosensors. Nanobiosensors - From Design to Applications will prove a source of inspiration for research on biosensors, their local level development and consequently using for practical application in different industries such as food, biomedical diagnosis, pharmaceutics, agriculture, drug discovery, forensics, etc. * Discusses the latest technology and advances in the field of nanobiosensors and their applications in human diseases, drug detection, toxins * Offers a broad and comprehensive view of cutting-edge research on advanced materials such as carbon materials, nitride based nanomaterials, metal and metal oxide based nanomaterials for the fast-developing nanobiosensors research * Goes to a wide scientific and industry audience Nanobiosensors - From Design to Applications is a resource for polymer chemists, spectroscopists, materials scientists, physical chemists, surface chemists, and surface physicists.

Book Engineered Nanopores for Bioanalytical Applications

Download or read book Engineered Nanopores for Bioanalytical Applications written by Joshua B. Edel and published by William Andrew. This book was released on 2013-03-19 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineered Nanopores for Bioanalytical Applications is the first book to focus primarily on practical analytical applications of nanopore development. These nanoscale analytical techniques have exciting potential because they can be used in applications such as DNA sequencing, DNA fragment sizing, DNA/protein binding, and protein/protein binding.This book provides a solid professional reference on nanopores for readers in academia, industry and engineering and biomedical fields. In addition, the book describes the instrumentation, fabrication, and experimental methods necessary to carry out nanopore-based experiments for developing new devices. - Includes application case studies for detection, identification and analysis of biomolecules and related functional nanomaterials - Introduces the techniques of manufacturing solid state materials with functional nanopores - Explains the use of nanopores in DNA sequencing and the wider range of applications from environmental monitoring to forensics

Book Recognition Receptors in Biosensors

Download or read book Recognition Receptors in Biosensors written by Mohammed Zourob and published by Springer Science & Business Media. This book was released on 2010-01-08 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognition receptors play a key role in the successful implementation of chemical and biosensors. Molecular recognition refers to non-covalent speci?c binding between molecules, one of which is typically a macromolecule or a molecular assembly, and the other is the target molecule (ligand or analyte). Biomolecular recognition is typically driven by many weak interactions such as hydrogen bo- ing, metal coordination, hydrophobic forces, van der Waals forces, pi-pi interactions and electrostatic interaction (due to permanent charges, dipoles, and quadrupoles) the polarization of charge distributions by the interaction partner leading to ind- tion and dispersion forces, and Pauli-exclusion-principle-derived inter-atomic repulsion, and a strong, “attractive” force arising largely from the entropy of the solvent and termed the hydrophobic effect. In recent years, there has been much progress in understanding the forces that drive the formation of such complexes, and how these forces are relate to the physical properties of the interacting molecules and their environment allows rational design of molecules and materials that interact in speci?c and desired ways. This book presents a signi?cant and up-to-date review of the various recognition elements, their immobilization, characterization techniques by a panel of dist- guished scientists. This work is a comprehensive approach to the recognition receptors area presenting a thorough knowledge of the subject and an effective integration of these receptors on sensor surfaces in order to appropriately convey the state-of the-art fundamentals and applications of the most innovative approaches.