Download or read book Data Driven Science and Engineering written by Steven L. Brunton and published by Cambridge University Press. This book was released on 2022-05-05 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook covering data-science and machine learning methods for modelling and control in engineering and science, with Python and MATLAB®.
Download or read book Materials Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 2000-01-16 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are the foundation and fabric of manufactured products. In fact, many leading commercial products and military systems could not exist without advanced materials and many of the new products critical to the nation's continued prosperity will come only through the development and commercialization of new materials. Thus, the field of materials science and engineering (MS&E) affects quality of life, industrial competitiveness, and the global environment. The United States leads the world in materials research and development, but does not have as impressive a record in the commercialization of new materials. This book explores the relationships among the producers and users of materials and examines the processes of innovationâ€"from the generation of knowledge to the ultimate integration of a material into a useful product. The authors recommend ways to accelerate the rate at which new ideas are integrated into finished products. Real-life case studies provide an accurate depiction of the processes that take materials and process innovations from the laboratory, to the factory floor, and ultimately to the consumer, drawing on experiences with three distinctive MS&E applicationsâ€"advanced aircraft turbines, automobiles, and computer chips and information-storage devices.
Download or read book Notable Notebooks written by Jessica Fries-Gaither and published by NSTA Press. This book was released on 2016-09-30 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take a trip through time to discover the value of a special place to jot your thoughts, whether you’re a famous scientist or a student. Notable Notebooks: Scientists and Their Writings brings to life the many ways in which everyone from Galileo to Jane Goodall has used a science notebook, including to sketch their observations, imagine experiments, record data, or just write down their thoughts. You also get four steps to starting your own notebook, plus mini-bios of the diverse featured scientists. Written in captivating rhyme, the text is sprinkled with lively illustrations. In fact, it looks a lot like the science notebook you’ll be eager to start after reading this inspiring book. Lexile Framework: 670L Visit www.Lexile.com for more information about Lexile Measures.
Download or read book Everything You Need to Ace Science in One Big Fat Notebook written by Workman Publishing and published by Workman Publishing Company. This book was released on 2018-02-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: It’s the revolutionary science study guide just for middle school students from the brains behind Brain Quest. Everything You Need to Ace Science . . . takes readers from scientific investigation and the engineering design process to the Periodic Table; forces and motion; forms of energy; outer space and the solar system; to earth sciences, biology, body systems, ecology, and more. The BIG FAT NOTEBOOK™ series is built on a simple and irresistible conceit—borrowing the notes from the smartest kid in class. There are five books in all, and each is the only book you need for each main subject taught in middle school: Math, Science, American History, English Language Arts, and World History. Inside the reader will find every subject’s key concepts, easily digested and summarized: Critical ideas highlighted in neon colors. Definitions explained. Doodles that illuminate tricky concepts in marker. Mnemonics for memorable shortcuts. And quizzes to recap it all. The BIG FAT NOTEBOOKS meet Common Core State Standards, Next Generation Science Standards, and state history standards, and are vetted by National and State Teacher of the Year Award–winning teachers. They make learning fun, and are the perfect next step for every kid who grew up on Brain Quest.
Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.
Download or read book Making Value written by National Academy of Engineering and published by National Academies Press. This book was released on 2012-12-02 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing is in a period of dramatic transformation. But in the United States, public and political dialogue is simplistically focused almost entirely on the movement of certain manufacturing jobs overseas to low-wage countries. The true picture is much more complicated, and also more positive, than this dialogue implies. After years of despair, many observers of US manufacturing are now more optimistic. A recent uptick in manufacturing employment and output in the United States is one factor they cite, but the main reasons for optimism are much more fundamental. Manufacturing is changing in ways that may favor American ingenuity. Rapidly advancing technologies in areas such as biomanufacturing, robotics, smart sensors, cloud-based computing, and nanotechnology have transformed not only the factory floor but also the way products are invented and designed, putting a premium on continual innovation and highly skilled workers. A shift in manufacturing toward smaller runs and custom-designed products is favoring agile and adaptable workplaces, business models, and employees, all of which have become a specialty in the United States. Future manufacturing will involve a global supply web, but the United States has a potentially great advantage because of our tight connections among innovations, design, and manufacturing and also our ability to integrate products and services. The National Academy of Engineering has been concerned about the issues surrounding manufacturing and is excited by the prospect of dramatic change. On June 11-12, 2012, it hosted a workshop in Washington, DC, to discuss the new world of manufacturing and how to position the United States to thrive in this world. The workshop steering committee focused on two particular goals. First, presenters and participants were to examine not just manufacturing but the broad array of activities that are inherently associated with manufacturing, including innovation and design. Second, the committee wanted to focus not just on making things but on making value, since value is the quality that will underlie high-paying jobs in America's future. Making Value: Integrating Manufacturing, Design, and Innovation to Thrive in the Changing Global Economy summarizes the workshop and the topics discussed by participants.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1994 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2017-06-22 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain Innovative Design, Advanced Processing, and Manufacturing Technologies Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) Polymer Derived Ceramics and Composites Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications Thermomechanical Behavior and Performance of Composites Ceramic Integration and Additive Manufacturing Technologies Component Testing and Evaluation of Composites CMC Applications in Transportation and Industrial Systems Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development Novel, Green, and Strategic Processing and Manufacturing Technologies Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications Porous Ceramics for Advanced Applications Through Innovative Processing Multifunctional Coatings for Sustainable Energy and Environmental Applications
Download or read book Helping Students Make Sense of the World Using Next Generation Science and Engineering Practices written by Christina V. Schwarz and published by NSTA Press. This book was released on 2017-01-31 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it’s time for a game change, you need a guide to the new rules. Helping Students Make Sense of the World Using Next Generation Science and Engineering Practices provides a play-by-play understanding of the practices strand of A Framework for K–12 Science Education (Framework) and the Next Generation Science Standards (NGSS). Written in clear, nontechnical language, this book provides a wealth of real-world examples to show you what’s different about practice-centered teaching and learning at all grade levels. The book addresses three important questions: 1. How will engaging students in science and engineering practices help improve science education? 2. What do the eight practices look like in the classroom? 3. How can educators engage students in practices to bring the NGSS to life? Helping Students Make Sense of the World Using Next Generation Science and Engineering Practices was developed for K–12 science teachers, curriculum developers, teacher educators, and administrators. Many of its authors contributed to the Framework’s initial vision and tested their ideas in actual science classrooms. If you want a fresh game plan to help students work together to generate and revise knowledge—not just receive and repeat information—this book is for you.
Download or read book Micro nano materials for energy storage and conversion written by Jinlin Lu and published by Frontiers Media SA. This book was released on 2023-03-31 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Computer Information and Systems Sciences and Engineering written by Khaled Elleithy and published by Springer Science & Business Media. This book was released on 2007-06-06 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference proceedings of: International Conference on Industrial Electronics, Technology & Automation (IETA 05) International Conference on Telecommunications and Networking (TeNe 05) International Conference on Engineering Education, Instructional Technology, Assessment, and E-learning (EIAE 05) include a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of: Industrial Electronics, Technology and Automation, Telecommunications, Networking, Engineering Education, Instructional Technology and e-Learning. The three conferences, (IETA 05, TENE 05 and EIAE 05) were part of the International Joint Conference on Computer, Information, and System Sciences, and Engineering (CISSE 2005). CISSE 2005, the World's first Engineering/Computing and Systems Research E-Conference was the first high-caliber Research Conference in the world to be completely conducted online in real-time via the internet. CISSE received 255 research paper submissions and the final program included 140 accepted papers, from more than 45 countries. The whole concept and format of CISSE 2005 was very exciting and ground-breaking. The powerpoint presentations, final paper manuscripts and time schedule for live presentations over the web had been available for 3 weeks prior to the start of the conference for all registrants, so they could pick and choose the presentations they want to attend and think about questions that they might want to ask. The live audio presentations were also recorded and are part of the permanent CISSE archive, which includes all power point presentations, papers and recorded presentations. All aspects of the conference were managed on-line; not only the reviewing, submissions and registration processes; but also the actual conference. Conference participants - authors, presenters and attendees - only needed an internet connection and sound available on their computers in order to be able to contribute and participate in this international ground-breaking conference. The on-line structure of this high-quality event allowed academic professionals and industry participants to contribute work and attend world-class technical presentations based on rigorously refereed submissions, live, without the need for investing significant travel funds or time out of the office. Suffice to say that CISSE received submissions from more than 50 countries, for whose researchers, this opportunity presented a much more affordable, dynamic and well-planned event to attend and submit their work to, versus a classic, on-the-ground conference. The CISSE conference audio room provided superb audio even over low speed internet connections, the ability to display PowerPoint presentations, and cross-platform compatibility (the conferencing software runs on Windows, Mac, and any other operating system that supports Java). In addition, the conferencing system allowed for an unlimited number of participants, which in turn granted CISSE the opportunity to allow all participants to attend all presentations, as opposed to limiting the number of available seats for each session. The implemented conferencing technology, starting with the submission & review system and ending with the online conferencing capability, allowed CISSE to conduct a very high quality, fulfilling event for all participants. See: www.cissee2005.org, sections: IETA, TENE, EIAE
Download or read book PC Mag written by and published by . This book was released on 2003-05-06 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: PCMag.com is a leading authority on technology, delivering Labs-based, independent reviews of the latest products and services. Our expert industry analysis and practical solutions help you make better buying decisions and get more from technology.
Download or read book Green Approaches to Biocomposite Materials Science and Engineering written by Verma, Deepak and published by IGI Global. This book was released on 2016-06-16 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial ecology, eco-efficiency, and green chemistry are guiding the development of the next generation of materials, products, and processes. Considerable growth has been seen in the use of biocomposites in the domestic sector, building materials, aerospace industry, circuit boards, and automotive applications over the past decade, but application in other sectors until now has been limited. Green Approaches to Biocomposite Materials Science and Engineering explores timely research on the various available types of natural fibers and the use of these fibers as a sustainable alternative to synthetic fibers and polymers. Emphasizing research-based solutions for sustainability across various industries, this publication is an essential reference source for engineers, researchers, environmental scientists, and graduate-level students.
Download or read book Automotive Engineering written by Brian Cantor and published by CRC Press. This book was released on 2008-02-19 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current automotive industry faces numerous challenges, including increased global competition, more stringent environmental and safety requirements, the need for higher performance vehicles, and reducing costs. The materials used in automotive engineering play key roles in overcoming these issues. Automotive Engineering: Lightweight, Functional
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Serials Received written by British Library. Document Supply Centre and published by . This book was released on 1994 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Writing the Laboratory Notebook written by Howard M. Kanare and published by . This book was released on 1985 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes in general how scientists can use handwritten research notebooks as a tool to record their research in progress, and in particular the legal protocols for industrial scientists to handwrite their research in progress so they can establish priority of invention in case a patent suit arises.
