Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Design of Advanced Manufacturing Systems written by Andrea Matta and published by Springer Science & Business Media. This book was released on 2005-04-25 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a framework and specific methods and tools for the selection and configuration of the capacity of Advanced Manufacturing Systems (AMS). AMS include Flexible Manufacturing Systems, Dedicated Manufacturing Systems, and Reconfigurable Manufacturing Systems. Starting from the characteristic of the competitive environment, the directions given by the company strategy, data regarding the products, and information regarding the different system architectures, the decision support system described here aids the decision maker by means of a formalized methodology that follows the various steps required to define the type and timing of 'capacity' acquisition and to define the detailed configuration of AMS along its life cycle. The decision making framework and tools illustrated in this volume combine decision-making theory, optimization theory, discrete event simulation and queuing networks. It will be of interest to graduate students and researchers involved in manufacturing engineering, industrial engineering and operations research.

Download or read book Advanced Manufacturing Technology written by and published by . This book was released on 1990 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Production Decline Analysis and Application written by Hedong Sun and published by Gulf Professional Publishing. This book was released on 2015-02-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, production decline-curve analysis has become the most widely used tool in the industry for oil and gas reservoir production analysis. However, most curve analysis is done by computer today, promoting a "black-box" approach to engineering and leaving engineers with little background in the fundamentals of decline analysis. Advanced Production Decline Analysis and Application starts from the basic concept of advanced production decline analysis, and thoroughly discusses several decline methods, such as Arps, Fetkovich, Blasingame, Agarwal-Gardner, NPI, transient, long linear flow, and FMB. A practical systematic introduction to each method helps the reservoir engineer understand the physical and mathematical models, solve the type curves and match up analysis, analyze the processes and examples, and reconstruct all the examples by hand, giving way to master the fundamentals behind the software. An appendix explains the nomenclature and major equations, and as an added bonus, online computer programs are available for download. - Understand the most comprehensive and current list of decline methods, including Arps, Fetkovich, Blasingame, and Agarwal-Gardner - Gain expert knowledge with principles, processes, real-world cases and field examples - Includes online downloadable computer programs on Blasingame decline type curves and normalized pseudo-pressure of gas wells

Download or read book Advanced Manufacturing Processes Systems and Technologies written by M. K. Khan and published by . This book was released on 1996 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume contains refereed papers accepted for the International Symposium on Advanced Manufacturing Processes, Systems and Technologies (AMPST 96), which was held at the University of Bradford, UK on 26th and 27th March 1996"--Pref. Organized by: University of Bradford and the Institute of Measurement and Control. Includes bibliographical references.

Download or read book Advanced Manufacturing Technology written by and published by . This book was released on 1985-01-01 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design for Advanced Manufacturing Technologies and Processes written by LaRoux K. Gillespie and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites

Download or read book Advanced Manufacturing Technology Management written by Mike Harrison and published by Financial Times/Prentice Hall. This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Organization and Management of Advanced Manufacturing written by Waldemar Karwowski and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takes into account the effective use of human factors issues in advanced manufacturing which would make the difference between the failure or success of industrial corporations. International authorities describe how to implement methods and techniques, applicable on a global basis, into manufacturing and process industries where change is being brought about as they move to concurrent engineering formats of operation.

Download or read book Management of Advanced Manufacturing Technology written by Donald Gerwin and published by Wiley-Interscience. This book was released on 1992-01-21 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management of Research and Development Organizations Managing the Unmanageable R. K. Jain and H. C. Triandis Written by the manager of a large research and development organization and a leading behavioral scientist, this book explores some of the essential topics in R&D management while providing hands-on guidance for putting specific techniques to work. 1990 (0 471-50791-1) 268 pp. Managing Technology in the Decentralized Firm Albert H. Rubenstein Technology has traditionally advanced faster than our ability to manage it. Here is a book designed to assist the professional in furthering the corporate technology program through its effective management. Based on studies of over 200 decentralized firms spanning a period of thirty years, Managing Technology in the Decentralized Firm addresses crucial aspects of the research and development and innovation processes, and suggests how to make them pay off. 1989 (0 471-61024-0) 476 pp. Statistical Quality Control for Manufacturing Managers William S. Messina In today’s competitive environment, the responsibility of the manufacturing manager has expanded to include ownership of the quality of the products coming off the line. The author uses real-life business situations to demonstrate how a manager can incorporate statistical quality control (SQC) into virtually any manufacturing line. He also offers practical advice on techniques managers can use to improve quality, increase productivity, and enhance the competitive position of the line. 1987 (0 471-85774-2) 331 pp. Management of Technological Change Yassin Sankar Technology produces changes within the organization that must be considered for effective implementation of innovations. This book focuses on the dynamics of technological change, especially the human aspects. The author examines the impact of technological change on job design, work flow, job stress, the elements of corporate culture, the organizational system, the information technology of the organization, the leadership style and strategic premises, the organizational design, and the value systems of managers and the organization. 1991 (0 471-63147-7) 374 pp.

Download or read book Mass Production Processes written by Anil Akdogan and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes.

Download or read book Advanced Manufacturing and Automation written by Ke Sheng Wang and published by Trans Tech Publications Ltd. This book was released on 2014-10-31 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 4th International Workshop of Advanced Manufacturing and Automation (IWAMA 2014), October 27-28, 2014, Shanghai, China. The 97 papers are grouped as follows: Chapter 1: Mechanisms and Machine of Manufacturing Systems, Chapter 2: Advanced Manufacturing Technologies, Chapter 3: Measurements, Monitoring and Analysis of Manufacturing Systems, Chapter 4: Mechatronics, Robotics and Control, Chapter 5: Intelligent Manufacturing Systems, Chapter 6: Production, Logistics and Supply Chain Management.

Download or read book Economic and Multiattribute Evaluation of Advanced Manufacturing Systems written by John R. Canada and published by Prentice Hall. This book was released on 1989 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Advanced Production and Industrial Engineering written by R.M. Singari and published by IOS Press. This book was released on 2022-11-23 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Things change rapidly in the field of engineering, and awareness of innovation in production techniques is essential for those working in the field if they are to utilise the best and most appropriate solutions available. This book presents the proceedings of ICAPIE-22, the 7th International Conference on Advanced Production and Industrial Engineering, held on 11 and 12 June 2022 in Delhi, India. The aim of the conference was to explore new windows for discoveries in design, materials and manufacturing, which have an important role in all fields of scientific growth, and to provide an arena for the showcasing of advancements and research endeavours from around the world. The 102 peer-reviewed and revised papers in this book include a large number of technical papers with rich content, describing ground-breaking research from various institutes. Covering a wide range of topics and promoting the contribution of production and industrial engineering and technology for a sustainable future, the book will be of interest to all those working in production and industrial engineering.

Download or read book Advanced Manufacturing Processes II written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2021-02-04 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8–11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.

Download or read book Economics of Advanced Manufacturing Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1980s have witnessed a tremendous growth in the field of computer integrated manufacturing systems. The other major areas of development have been computer-aided design, computer-aided manufacturing, industrial robotics, automated assembly, cellular and modular material handling, computer networking and office automation to name just a few. These new technologies are generally capital intensive and do not conform to traditional cost structures. The net result is a tremendous change in the way costs should be estimated and economic analyses performed. The majority of existing engineering economy texts still profess application of traditional analysis methods. But, as was men tioned above, it is clear that the basic trend in manufacturing industries is itself changing. So it is quite obvious that the practice of traditional economic analysis methods should change too. This book is an attempt to address the various issues associated with non-traditional methods for evaluation of advanced computer-integrated technologies. This volume consists of twenty refereed articles which are grouped into five parts. Part one, Economic Justification Methods, consists of six articles. In the first paper, Soni et at. present a new classification for economic justification methods for advanced automated manufacturing systems. In the second, Henghold and LeClair look at strengths and weaknesses of expert systems in general and more specifically, an ap plication aimed at investment justification in advanced technology. The third paper, by Carrasco and Lee, proposes an enhanced economic methodology to improve the needs analysis, conceptual design and de tailed design activities associated with technology modernization.

Download or read book Sustainable Production Through Advanced Manufacturing Intelligent Automation and Work Integrated Learning written by J. Andersson and published by IOS Press. This book was released on 2024-05-07 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaboration between those working in product development and production is essential for successful product realization. The Swedish Production Academy (SPA) was founded in 2006 with the aim of driving and developing production research and higher education in Sweden, and increasing national cooperation in research and education within the area of production. This book presents the proceedings of SPS2024, the 11th Swedish Production Symposium, held from 23 to 26 April 2024 in Trollhättan, Sweden. The conference provided a platform for SPA members, as well as for professionals from industry and academia interested in production research and education from around the world, to share insights and ideas. The title and overarching theme of SPS2024 was Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning, and the conference emphasized stakeholder value, the societal role of industry, worker wellbeing, and environmental sustainability, in alignment with the European Commission's vision for the future of manufacturing. The 59 papers included here were accepted for publication and presentation at the symposium after a thorough review process. They are divided into 6 sections reflecting the thematic areas of the conference, which were: sustainable manufacturing, smart production and automation, digitalization for efficient product realization, circular production, industrial transformation for sustainability, and the integration of education and research. Highlighting the latest developments and advances in automation and sustainable production, the book will be of interest to all those working in the field.