Download or read book Advanced Processes for 193 nm Immersion Lithography written by Yayi Wei and published by SPIE Press. This book was released on 2009 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to advanced processes and materials used in 193-nm immersion lithography (193i). It is an important text for those new to the field as well as for current practitioners who want to broaden their understanding of this latest technology. The book can be used as course material for graduate students of electrical engineering, material sciences, physics, chemistry, and microelectronics engineering and can also be used to train engineers involved in the manufacture of integrated circuits. It provides techniques for selecting critical materials (topcoats, photoresists, and antireflective coatings) and optimizing immersion processes to ensure higher performance and lower defectivity at lower cost. This book also includes sections on shrinking, trimming, and smoothing of the resist pattern to reduce feature sizes and line-edge roughness. Finally, it describes the recent development of 193i in combination with double exposure and double patterning.
Download or read book Integrated Circuit Fabrication written by James D. Plummer and published by Cambridge University Press. This book was released on 2023-10-31 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master fundamental technologies for modern semiconductor integrated circuits with this definitive textbook. It includes an early introduction of a state-of-the-art CMOS process flow, exposes students to big-picture thinking from the outset, and encourages a practical integration mindset. Extensive use of process and TCAD simulation, using industry tools such as Silvaco Athena and Victory Process, provides students with deeper insight into physical principles, and prepares them for applying these tools in a real-world setting. Accessible framing assumes only a basic background in chemistry, physics and mathematics, providing a gentle introduction for students from a wide range of backgrounds; and over 450 figures (many in color), and more than 280 end-of-chapter problems, will support and cement student understanding. Accompanied by lecture slides and solutions for instructors, this is the ideal introduction to semiconductor technology for senior undergraduate and graduate students in electrical engineering, materials science and physics, and for semiconductor engineering professionals seeking an authoritative introductory reference.
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many bottom-up and top-down techniques for nanomaterial and nanostructure generation have enabled the development of applications in nanoelectronics and nanophotonics. Handbook of Nanophysics: Nanoelectronics and Nanophotonics explores important recent applications of nanophysics in the areas of electronics and photonics. Each peer-reviewed c
Download or read book Encyclopedia of Modern Optics written by Bob D. Guenther and published by Academic Press. This book was released on 2018-02-14 with total page 2253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Modern Optics, Second Edition, Five Volume Set provides a wide-ranging overview of the field, comprising authoritative reference articles for undergraduate and postgraduate students and those researching outside their area of expertise. Topics covered include classical and quantum optics, lasers, optical fibers and optical fiber systems, optical materials and light-emitting diodes (LEDs). Articles cover all subfields of optical physics and engineering, such as electro-optical design of modulators and detectors. This update contains contributions from international experts who discuss topics such as nano-photonics and plasmonics, optical interconnects, photonic crystals and 2D materials, such as graphene or holy fibers. Other topics of note include solar energy, high efficiency LED’s and their use in illumination, orbital angular momentum, quantum optics and information, metamaterials and transformation optics, high power fiber and UV fiber lasers, random lasers and bio-imaging. Addresses recent developments in the field and integrates concepts from fundamental physics with applications for manufacturing and engineering/design Provides a broad and interdisciplinary coverage of specialist areas Ensures that the material is appropriate for new researchers and those working in a new sub-field, as well as those in industry Thematically arranged and alphabetically indexed, with cross-references added to facilitate ease-of-use
Download or read book Microlithography written by Bruce W. Smith and published by CRC Press. This book was released on 2020-05-01 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Third Edition to the bestselling Microlithography: Science and Technology provides a balanced treatment of theoretical and operational considerations, from fundamental principles to advanced topics of nanoscale lithography. The book is divided into chapters covering all important aspects related to the imaging, materials, and processes that have been necessary to drive semiconductor lithography toward nanometer-scale generations. Renowned experts from the world’s leading academic and industrial organizations have provided in-depth coverage of the technologies involved in optical, deep-ultraviolet (DUV), immersion, multiple patterning, extreme ultraviolet (EUV), maskless, nanoimprint, and directed self-assembly lithography, together with comprehensive descriptions of the advanced materials and processes involved. New in the Third Edition In addition to the full revision of existing chapters, this new Third Edition features coverage of the technologies that have emerged over the past several years, including multiple patterning lithography, design for manufacturing, design process technology co-optimization, maskless lithography, and directed self-assembly. New advances in lithography modeling are covered as well as fully updated information detailing the new technologies, systems, materials, and processes for optical UV, DUV, immersion, and EUV lithography. The Third Edition of Microlithography: Science and Technology authoritatively covers the science and engineering involved in the latest generations of microlithography and looks ahead to the future systems and technologies that will bring the next generations to fruition. Loaded with illustrations, equations, tables, and time-saving references to the most current technology, this book is the most comprehensive and reliable source for anyone, from student to seasoned professional, looking to better understand the complex world of microlithography science and technology.
Download or read book Materials and Processes for Next Generation Lithography written by and published by Elsevier. This book was released on 2016-11-08 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the requirements of the semiconductor industry have become more demanding in terms of resolution and speed it has been necessary to push photoresist materials far beyond the capabilities previously envisioned. Currently there is significant worldwide research effort in to so called Next Generation Lithography techniques such as EUV lithography and multibeam electron beam lithography. These developments in both the industrial and the academic lithography arenas have led to the proliferation of numerous novel approaches to resist chemistry and ingenious extensions of traditional photopolymers. Currently most texts in this area focus on either lithography with perhaps one or two chapters on resists, or on traditional resist materials with relatively little consideration of new approaches. This book therefore aims to bring together the worlds foremost resist development scientists from the various community to produce in one place a definitive description of the many approaches to lithography fabrication. - Assembles up-to-date information from the world's premier resist chemists and technique development lithographers on the properties and capabilities of the wide range of resist materials currently under investigation - Includes information on processing and metrology techniques - Brings together multiple approaches to litho pattern recording from academia and industry in one place
Download or read book Variation Aware Advanced CMOS Devices and SRAM written by Changhwan Shin and published by Springer. This book was released on 2016-06-06 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary issues in complementary metal-oxide semiconductor (CMOS) device design, describing how to overcome process-induced random variations such as line-edge-roughness, random-dopant-fluctuation, and work-function variation, and the applications of novel CMOS devices to cache memory (or Static Random Access Memory, SRAM). The author places emphasis on the physical understanding of process-induced random variation as well as the introduction of novel CMOS device structures and their application to SRAM. The book outlines the technical predicament facing state-of-the-art CMOS technology development, due to the effect of ever-increasing process-induced random/intrinsic variation in transistor performance at the sub-30-nm technology nodes. Therefore, the physical understanding of process-induced random/intrinsic variations and the technical solutions to address these issues plays a key role in new CMOS technology development. This book aims to provide the reader with a deep understanding of the major random variation sources, and the characterization of each random variation source. Furthermore, the book presents various CMOS device designs to surmount the random variation in future CMOS technology, emphasizing the applications to SRAM.
Download or read book Nanolithography written by M Feldman and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuits, and devices fabricated using the techniques developed for integrated circuits, have steadily gotten smaller, more complex, and more powerful. The rate of shrinking is astonishing – some components are now just a few dozen atoms wide. This book attempts to answer the questions, "What comes next? and "How do we get there?Nanolithography outlines the present state of the art in lithographic techniques, including optical projection in both deep and extreme ultraviolet, electron and ion beams, and imprinting. Special attention is paid to related issues, such as the resists used in lithography, the masks (or lack thereof), the metrology needed for nano-features, modeling, and the limitations caused by feature edge roughness. In addition emerging technologies are described, including the directed assembly of wafer features, nanostructures and devices, nano-photonics, and nano-fluidics.This book is intended as a guide to the researcher new to this field, reading related journals or facing the complexities of a technical conference. Its goal is to give enough background information to enable such a researcher to understand, and appreciate, new developments in nanolithography, and to go on to make advances of his/her own. - Outlines the current state of the art in alternative nanolithography technologies in order to cope with the future reduction in size of semiconductor chips to nanoscale dimensions - Covers lithographic techniques, including optical projection, extreme ultraviolet (EUV), nanoimprint, electron beam and ion beam lithography - Describes the emerging applications of nanolithography in nanoelectronics, nanophotonics and microfluidics
Download or read book Nano CMOS Design for Manufacturability written by Ban P. Wong and published by John Wiley & Sons. This book was released on 2008-12-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover innovative tools that pave the way from circuit and physical design to fabrication processing Nano-CMOS Design for Manufacturability examines the challenges that design engineers face in the nano-scaled era, such as exacerbated effects and the proven design for manufacturability (DFM) methodology in the midst of increasing variability and design process interactions. In addition to discussing the difficulties brought on by the continued dimensional scaling in conformance with Moore's law, the authors also tackle complex issues in the design process to overcome the difficulties, including the use of a functional first silicon to support a predictable product ramp. Moreover, they introduce several emerging concepts, including stress proximity effects, contour-based extraction, and design process interactions. This book is the sequel to Nano-CMOS Circuit and Physical Design, taking design to technology nodes beyond 65nm geometries. It is divided into three parts: Part One, Newly Exacerbated Effects, introduces the newly exacerbated effects that require designers' attention, beginning with a discussion of the lithography aspects of DFM, followed by the impact of layout on transistor performance Part Two, Design Solutions, examines how to mitigate the impact of process effects, discussing the methodology needed to make sub-wavelength patterning technology work in manufacturing, as well as design solutions to deal with signal, power integrity, WELL, stress proximity effects, and process variability Part Three, The Road to DFM, describes new tools needed to support DFM efforts, including an auto-correction tool capable of fixing the layout of cells with multiple optimization goals, followed by a look ahead into the future of DFM Throughout the book, real-world examples simplify complex concepts, helping readers see how they can successfully handle projects on Nano-CMOS nodes. It provides a bridge that allows engineers to go from physical and circuit design to fabrication processing and, in short, make designs that are not only functional, but that also meet power and performance goals within the design schedule.
Download or read book Springer Handbook of Semiconductor Devices written by Massimo Rudan and published by Springer Nature. This book was released on 2022-11-10 with total page 1680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook comprehensively covers the topic of semiconductor devices, embracing all aspects from theoretical background to fabrication, modeling, and applications. Nearly 100 leading scientists from industry and academia were selected to write the handbook's chapters, which were conceived for professionals and practitioners, material scientists, physicists and electrical engineers working at universities, industrial R&D, and manufacturers. Starting from the description of the relevant technological aspects and fabrication steps, the handbook proceeds with a section fully devoted to the main conventional semiconductor devices like, e.g., bipolar transistors and MOS capacitors and transistors, used in the production of the standard integrated circuits, and the corresponding physical models. In the subsequent chapters, the scaling issues of the semiconductor-device technology are addressed, followed by the description of novel concept-based semiconductor devices. The last section illustrates the numerical simulation methods ranging from the fabrication processes to the device performances. Each chapter is self-contained, and refers to related topics treated in other chapters when necessary, so that the reader interested in a specific subject can easily identify a personal reading path through the vast contents of the handbook.
Download or read book Advanced Interconnects for ULSI Technology written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2012-04-02 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding new materials for copper/low-k interconnects is critical to the continuing development of computer chips. While copper/low-k interconnects have served well, allowing for the creation of Ultra Large Scale Integration (ULSI) devices which combine over a billion transistors onto a single chip, the increased resistance and RC-delay at the smaller scale has become a significant factor affecting chip performance. Advanced Interconnects for ULSI Technology is dedicated to the materials and methods which might be suitable replacements. It covers a broad range of topics, from physical principles to design, fabrication, characterization, and application of new materials for nano-interconnects, and discusses: Interconnect functions, characterisations, electrical properties and wiring requirements Low-k materials: fundamentals, advances and mechanical properties Conductive layers and barriers Integration and reliability including mechanical reliability, electromigration and electrical breakdown New approaches including 3D, optical, wireless interchip, and carbon-based interconnects Intended for postgraduate students and researchers, in academia and industry, this book provides a critical overview of the enabling technology at the heart of the future development of computer chips.
Download or read book Nano Lithography written by Stefan Landis and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography is an extremely complex tool – based on the concept of “imprinting” an original template version onto mass output – originally using relatively simple optical exposure, masking, and etching techniques, and now extended to include exposure to X-rays, high energy UV light, and electron beams – in processes developed to manufacture everyday products including those in the realms of consumer electronics, telecommunications, entertainment, and transportation, to name but a few. In the last few years, researchers and engineers have pushed the envelope of fields including optics, physics, chemistry, mechanics and fluidics, and are now developing the nanoworld with new tools and technologies. Beyond the scientific challenges that are endemic in this miniaturization race, next generation lithography techniques are essential for creating new devices, new functionalities and exploring new application fields. Nanolithography is the branch of nanotechnology concerned with the study and application of fabricating nanometer-scale structures − meaning the creation of patterns with at least one lateral dimension between the size of an individual atom and approximately 100 nm. It is used in the fabrication of leading-edge semiconductor integrated circuits (nanocircuitry) or nanoelectromechanical systems (NEMS). This book addresses physical principles as well as the scientific and technical challenges of nanolithography, covering X-ray and NanoImprint lithography, as well as techniques using scanning probe microscopy and the optical properties of metal nanostructures, patterning with block copolymers, and metrology for lithography. It is written for engineers or researchers new to the field, and will help readers to expand their knowledge of technologies that are constantly evolving.
Download or read book Handbook of Thin Film Deposition written by Dominic Schepis and published by Elsevier. This book was released on 2024-10-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thin Film Deposition, Fifth Edition, is a comprehensive reference focusing on thin film technologies and applications used in the semiconductor industry. When pursuing patents, there is a phase called 'reduction to practice' where the idea for a technology transitions from a concept to actual use. The section 'Thin Film Reduction to Practice' includes chapters that review the most relevant methods to fabricate thin films towards practical applications. Then, the latest applications of thin film deposition technologies are discussed. Handbook of Thin Film Deposition, 5th Edition is suitable for materials scientists and engineers in academia and working in semiconductor R&D. - Offers a practical survey of thin film technologies including design, fabrication, and reliability - Covers core processes and applications in the semiconductor industry and discusses latest advances in new thin film development - Features new chapters that review methods on front-end and back-end thin films
Download or read book Recent Topics on Modeling of Semiconductor Processes Devices and Circuits written by Rasit Onur Topaloglu and published by Bentham Science Publishers. This book was released on 2011-09-09 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The last couple of years have been very busy for the semiconductor industry and researchers. The rapid speed of production channel length reduction has brought lithographic challenges to semiconductor modeling. These include stress optimization, transisto"
Download or read book Micro Nanolithography written by Jagannathan Thirumalai and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to give proficient people a comprehensive review of up-to-date global improvements in hypothetical and experimental evidences, perspectives and prospects of some newsworthy instrumentation and its numerous technological applications for a wide range of lithographic fabrication techniques. The present theme of this book is concomitant with the lithographic ways and means of deposition, optimization parameters and their wide technological applications. This book consists of six chapters comprehending with eminence of lithography, fabrication and reproduction of periodic nanopyramid structures using UV nanoimprint lithography for solar cell applications, large-area nanoimprint lithography and applications, micro-/nanopatterning on polymers, OPC under immersion lithography associated to novel luminescence applications, achromatic Talbot lithography (ATL) and the soft X-ray interference lithography. Individual chapters provide a base for a wide range of readers from different fiels, students and researchers, who may be doing research pertinent to the topics discussed in this book and find basic as well as advanced principles of designated subjects related to these phenomena explained plainly. The book contains six chapters by experts in different fields of lithographic fabrication and technology from over 15 research institutes across the globe.
Download or read book Handbook of Integrated Circuit Industry written by Yangyuan Wang and published by Springer Nature. This book was released on 2023-12-29 with total page 2006 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by hundreds experts who have made contributions to both enterprise and academics research, these excellent reference books provide all necessary knowledge of the whole industrial chain of integrated circuits, and cover topics related to the technology evolution trends, fabrication, applications, new materials, equipment, economy, investment, and industrial developments of integrated circuits. Especially, the coverage is broad in scope and deep enough for all kind of readers being interested in integrated circuit industry. Remarkable data collection, update marketing evaluation, enough working knowledge of integrated circuit fabrication, clear and accessible category of integrated circuit products, and good equipment insight explanation, etc. can make general readers build up a clear overview about the whole integrated circuit industry. This encyclopedia is designed as a reference book for scientists and engineers actively involved in integrated circuit research and development field. In addition, this book provides enough guide lines and knowledges to benefit enterprisers being interested in integrated circuit industry.
Download or read book Design and Process Integration for Microelectronic Manufacturing written by and published by . This book was released on 2006 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
