Download or read book Advanced Powder Technology written by and published by . This book was released on 2001 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book Powder Technology Handbook written by Hiroaki Masuda and published by CRC Press. This book was released on 2006-01-13 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Powder Technology Handbook, Third Edition provides a comprehensive guide to powder technology while examining the fundamental engineering processes of particulate technology. The book offers a well-rounded perspective on powder technologies that extends from particle to powder and from basic problems to actual applications. Pro

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques

Download or read book POWDER METALLURGY SECOND EDITION written by ANGELO, P.C. and published by PHI Learning Pvt. Ltd.. This book was released on 2022-11-01 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last seven years, following the publication of the first edition of this book, the field of powder metallurgy has produced a number of advanced and useful technologies. In order to make the book relevant and useful to its target readership two new chapters have been added in its second edition. The chapter on Recent Advances in Micro- and Nano-fabrication through Powder Metallurgy deals with the fabrication of micro-grained bulk structure and for manufacturing of nano-sized components using metal and ceramic powders by recent techniques. The chapter on Additive Manufacturing (AM) discusses one of the most exciting innovations in the field of powder metallurgy in recent times. In the last three decades, a number of AM processes have been developed which use either laser sources or electron beams to fuse the metallic or ceramic or composite powders. The book covers most of the recent developments in powder metallurgy such as atomization, mechanical alloying, self-propagating high-temperature synthesis, metal injection moulding, and hot isostatic pressing. Model questions have been given at the end of each chapter. An appendix of relevant terms in powder metallurgy has also been included for ready reference. The book is primarily written for undergraduate and postgraduate students of Metallurgy, Material Science, Mechanical, and Production Engineering, as well as for practicing engineers in the field of powder metallurgy. TARGET AUDIENCE • UG and PG (Metallurgy, Material Science, Mechanical, and Production Engineering) • Practising Engineers in the field of Powder Metallurgy.

Download or read book Granulation written by Agba D. Salman and published by Elsevier. This book was released on 2006-11-24 with total page 1403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granulation provides a complete and comprehensive introduction on the state-of-the-art of granulation and how it can be applied both in an academic context and from an industrial perspective. Coupling science and engineering practices it covers differing length scales from the sub-granule level through behaviour through single granules, to bulk granule behaviour and equipment design. With special focus on a wide range of industrially relevant areas from fertilizer production, through to pharmaceuticals. Experimental data is complemented by mathematical modelling in this emerging field, allowing for a greater understanding of the basis of particle products and this important industry sector.Four themes run through the book: 1. The Macro Scale processing for Granulation – including up to date descriptions of the methods used for granulation and how they come about and how to monitor – on-line these changes.2. The Applications of granulation from an industrial perspective, with current descriptive roles and how they are undertaken with relevance to industry, and effective properties.3. Mechanistic descriptions of granulation and the different rate processes occurring within the granulator. This includes methods of modelling the process using Population – Balance Equations, and Multi-level Computational Fluid Dynamics Models.4. The Micro Scale: Granules and Smaller, looking at single granules and there interactions and modelling, while also considering the structure of granules and their constituent liquid bridges.* Covers a wide range of subjects and industrial applications* Provides an understanding of current issues for industrial and academic environments* Allows the reader an understanding of the science behind engineered granulation processes

Download or read book Chemistry of Powder Production written by Yasuo Arai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Powder Production focuses on the solid-state chemistry of powder materials and relates this to the structure, properties and preparation, and characterization techniques for these important industrial products. Additionally, the properties of the particles are discussed in relation to their surface structure and characteristics. This book describes the fundamentals of statistical methods for measuring the characteristics of particles. New advanced materials being developed in powder technology manufacturing techniques are also emphasised, including powdered materials for advanced ceramics as well as magnetic and pigment materials.

Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now.Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals).The result is a formidable reference source for those in all aspects of the metal powder industry. - Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Expert Russian team of authors, all very experienced - English translation and update of book previously published in Russian

Download or read book Advances in Nanotechnology Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 8760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanotechnology Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Nanotechnology. The editors have built Advances in Nanotechnology Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Nanotechnology in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Nanotechnology Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Pharmaceutical Blending and Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2015-05-11 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in four parts, this book provides a dedicated and in-depth reference for blending within the pharmaceutical manufacturing industry. It links the science of blending with regulatory requirements associated with pharmaceutical manufacture. The contributors are a combination of leading academic and industrial experts, who provide an informed and industrially relevant perspective of the topic. This is an essential book for the pharmaceutical manufacturing industry, and related academic researchers in pharmaceutical science and chemical and mechanical engineering.

Download or read book Frontiers of Energy and Environmental Engineering written by Wen-Pei Sung and published by CRC Press. This book was released on 2012-11-23 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers of Energy and Environmental Engineering brings together 192 peer-reviewed papers presented at the 2012 International Conference on Frontiers of Energy and Environment Engineering, held in Hong Kong, December 11-13, 2012. The aim of the conference was to provide a platform for researchers, engineers and academics as well as industry professionals from all over the world to present their activities in the field of energy and environmental engineering as well as share research results. This proceedings volume promotes the development of the field of energy and environmental engineering, strengthening international academic cooperation and intercommunication, and encouraging the fruitful exchange of research ideas and results. The book provides a broad overview of the latest advances made in the field of energy and environmental engineering. Topics covered include energy efficiency and energy management, energy exploration and exploitation, power generation technologies, water pollution and protection, air pollution and protection and environmental engineering and management among others. This volume will be of interest to a global audience consisting of academic researchers, industry professionals and policy-makers active in the wide field of energy and environmental engineering.

Download or read book Chemical Physics of Polymer Nanocomposites written by Vera V. Myasoedova and published by John Wiley & Sons. This book was released on 2024-07-17 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive knowledge on the preparation, characterization, and applications of polymer nanocomposites Chemical Physics of Polymer Nanocomposites examines the state of the art in preparation, processing, characterizing, and applying a wide range of polymer nanocomposites, elucidating nanofiller/polymer interactions, nanofiller dispersion, distribution, filler-filler interactions, and interface properties, with a particular focus on the rheology of this important class of materials. The dependence of the rheological properties on the preparation techniques is discussed in detail, complemented by an overview of the processing approaches using conventional and micro injection molding, extrusion, compression molding, film blowing, pultrusion, and resin transfer molding. The book covers the latest understanding and accomplishments on polymer composites and presents the huge variety of this materials class. Practice-oriented with industry relevance, it also reviews preparation, characterization, morphology, properties, applications, sustainability, and recyclability. The topics covered in Chemical Physics of Polymer Nanocomposites include: Classification of nano fillers, nano-objects, nanomaterials, and polymer nanocomposites based on chemical nature and identity, and synthesis and characterization of nanoparticles General manufacturing methods and processes, including melt and shear mixing manufacturing of polymer nanocomposites 1D nano fillers and polymer nanocomposites, including polymer nanocomposites based on graphite nanoplatelets (GNP) and amphiphilic graphene platelets Polymer nanocomposites based on nano chitin, starch, and lignin, gold nanowires, titanium dioxide, and graphene and graphene oxide Chemical Physics of Polymer Nanocomposites is an essential resource for materials scientists, polymer chemists, chemical engineers, and engineering scientists in industry.

Download or read book Sustainable Construction Materials written by Habeeb Lateef Muttashar Alzuabidi and published by CRC Press. This book was released on 2019-01-15 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid industrial growth has witnessed the ever-increasing utilization of sand from rivers for various construction purposes, which has caused disruption to natural ecosystems. Sustainable Construction Materials: Recycled Spent Garnet presents an investigation into the capacity for these minerals to serve as a sand replacement and as a viable, sustainable construction material to help mitigate the current rate of exploitation of river sand. Features: Presents the effects of spent garnet on the fresh and hardened characteristics of self-compacting geopolymer concrete in terms of workability and mechanical strength. Examines spent garnet with regard to concrete durability in response to carbonation, as well as sulphate and acid attack. Includes a comprehensive review of the existing literature in the field, including past developments in self-compacting geopolymer concrete, as well as the ongoing activities in the field of spent garnet-based concrete production.

Download or read book Metal Oxide Powder Technologies written by Yarub Al-Douri and published by Elsevier. This book was released on 2020-06-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications reviews the fundamentals, processing methods and applications of this key materials system. Topics addressed comprehensively cover chemical and physical properties, synthesis, preparation, both accepted and novel processing methods, modeling and simulation. The book provides fundamental information on the key properties that impact performance, such as particle size and crystal structure, along with methods to measure, analyze and evaluate. Finally, important applications are covered, including biomedical, energy, electronics and materials applications. - Provides a comprehensive overview of key topics both on the theoretical side and the experimental - Discusses important properties that impact metal oxide performance, processing methods (both novel and accepted), and important applications - Reviews the most relevant applications, such as biomedical, energy, electronics and materials applications

Download or read book Simulations in Bulk Solids Handling written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2023-01-20 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulations in Bulk Solids Handling Valuable resource for engineers and professionals dealing with bulk granular or powdered materials across industries using Discrete Element Methods (DEM) In many traditional university engineering programmes, no matter whether undergraduate or postgraduate, the behavior of granular materials is not covered in depth or at all. This omission leaves recent engineering graduates with little formal education in the major industrial area of bulk solids handling. This book teaches young professionals and engineers to find appropriate solutions for handling granular and powdered materials. It also provides valuable information for experienced engineers to gain an understanding and appreciation of the most significant simulation methods–DEM chief amongst them. For any student or professional involved with bulk solids handling, this book is a key resource to understand the most efficient and effective stimulation methods that are available today. Its comprehensive overview of the topic allows for upcoming professionals to ensure they have adequate knowledge in the field and for experienced professionals to improve their skills and processes.

Download or read book Advances in Optics Reviews Vol 2 written by Sergey Yurish and published by Lulu.com. This book was released on 2018-04-27 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Advances in Optics: Reviews' Book Series is a comprehensive study of the field of optics, which provides readers with the most up-to-date coverage of optics, photonics and lasers with a good balance of practical and theoretical aspects. Directed towards both physicists and engineers this Book Series is also suitable for audiences focusing on applications of optics. The Vol.2 is devoted to lasers and photonics, and contains 15 chapters written by 40 authors from 15 countries: Algeria, Australia, Canada, China, Ecuador, Finland, France, Germany, India, Mexico, Poland, Qatar, Spain, Turkey and USA. A clear comprehensive presentation makes these books work well as both a teaching resources and a reference books. The book is intended for researchers and scientists in physics and optics, in academia and industry, as well as postgraduate students.

Download or read book Coupled CFD DEM Modeling written by Hamid Reza Norouzi and published by John Wiley & Sons. This book was released on 2016-10-17 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the CFD-DEM method of modeling which combines both the Discrete Element Method and Computational Fluid Dynamics to simulate fluid-particle interactions. Deals with both theoretical and practical concepts of CFD-DEM, its numerical implementation accompanied by a hands-on numerical code in FORTRAN Gives examples of industrial applications