Download or read book Advanced Numerical Methods for Complex Environmental Models Needs and Availability written by István Faragó and published by Bentham Science Publishers. This book was released on 2013-12-10 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: High air pollution levels pose a significant threat to plants, animals and human beings. Efforts by researchers are directed towards keeping air pollution levels below well defined ‘critical‘ levels in order to maintain a sustainable atmosphere and environmental system. The application of advanced mathematical models is important for researchers to achieve this goal as efficiently as possible. Mathematical models can be used to predict answers to many important questions about the environment. This application comes with several complex theoretical and practical obstacles which need to be resolved. A successfully applicable mathematical model needs to enable researchers to • Mathematically describe all important physical and chemical processes. • Apply fast and sufficiently accurate numerical methods. • Ensure that the model runs efficiently on modern high speed computers. • Use high quality input data, both meteorological data and emission inventories, in the runs. • Verify the model results by comparing them with reliable measurements taken in different parts of the spatial domain of the model. • Carry out long series of sensitivity experiments to check the response of the model to changes of different key parameters. • Visualize and animate the output results in order to make them easily understandable even to non-specialists. This monograph thoroughly describes mathematical methods useful for various situations in environmental modeling - including finite difference methods, splitting methods, parallel computation, etc. - and provides a framework for resolving problems posed in relation to the points listed above. Chapters are written by well-known specialists making this book a handy reference for researchers, university teachers and students working and studying in the areas of air pollution, meteorology, applied mathematics and computer science.
Download or read book Progress in Industrial Mathematics at ECMI 2012 written by Magnus Fontes and published by Springer. This book was released on 2014-05-14 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 17th European Conference on Mathematics for Industry, ECMI2012, held in Lund, Sweden, July 2012, at which ECMI celebrated its 25th anniversary. It covers mathematics in a wide range of applications and methods, from circuit and electromagnetic devices, environment, fibers, flow, medicine, robotics and automotive industry, further applications to methods and education. The book includes contributions from leading figures in business, science and academia that promote the application of mathematics to industry and emphasize industrial sectors that offer the most exciting opportunities. The contributions reinforce the role of mathematics as being a catalyst for innovation as well as an overarching resource for industry and business. The book features an accessible presentation of real-world problems in industry and finance, provides insight and tools for engineers and scientists who will help them to solve similar problems and offers modeling and simulation techniques that will provide mathematicians with a source of fresh ideas and inspiration.
Download or read book Numerical Methods and Applications written by Geno Nikolov and published by Springer. This book was released on 2019-01-21 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 9th International Conference on Numerical Methods and Applications, NMA 2018, held in Borovets, Bulgaria, in August 2018. The 56 revised regular papers presented were carefully reviewed and selected from 61 submissions for inclusion in this book. The papers are organized in the following topical sections: numerical search and optimization; problem-driven numerical method: motivation and application, numerical methods for fractional diffusion problems; orthogonal polynomials and numerical quadratures; and Monte Carlo and Quasi-Monte Carlo methods.
Download or read book Modeling the Fate and Effect of the Toxic Substances in the Environment written by S Jorgensen and published by Elsevier. This book was released on 2013-10-22 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling the Fate and Effect of the Toxic Substances in the Environment contains the proceedings of a Symposium on "Modeling the Fate and Effect of Toxic Substances in the Environment", held on June 6-10, 1983 in Copenhagen, Denmark, and sponsored by the International Society for Ecological Modeling. The symposium provided a forum for discussing the state of the art in modeling the fate and effect of toxic substances in the environment. Topics include parameter estimation, theoretical considerations, and models of a wide variety of toxic compounds in aquatic and terrestrial ecosystems. Comprised of 16 chapters, this volume begins with an account of parameter estimation in toxic substance models, followed by a discussion on extinction and persistence in models of population-toxicant interactions. The reader is then introduced to PATHWAY, a simulation model of the transport of radionuclides through agroecosystems. Subsequent chapters focus on possible cause-effect relationships in the dying of Germany's spruce-fir forests; application of risk and uncertainty analysis techniques to a heavy metal speciation model; the biological effects of toxicants in aquatic microcosm systems; and the dispersal and biological effect of toxins in the Tamar estuary in England. The book concludes with a description of a nonlinear mathematical model for the transport and spreading of oil slicks. This book will be useful to students, practitioners, and researchers in the field of inorganic chemistry, as well as those who are interested in the environmental effects of toxic compounds.
Download or read book Applied System Simulation written by Mohammad S. Obaidat and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and molding are efficient techniques that can aid the city and regional planners and engineers in optimizing the operation of urban systems such as traffic light control, highway toll automation, consensus building, public safety, and environmental protection. When modeling transportation systems such as freeway systems, arterial or downtown grid systems, the city planner and engineer is concerned with capturing the varied interactions between drivers, automobiles, and the infrastructure. Modeling and simulation are used to effectively optimize the design and operation of all of these urban systems. It is possible that in an urban simulation community workshop, citizens can work interactively in front of computers and be able using the click of the mouse to walk up to their own front porch, looking at the proposed shopping mall alternatives across the street from virtually any angle and proposed bridge or tunnel and see how it can reduce traffic congestion. Buildings can be scaled down or taken out, their orientation can be changed in order to check the view and orientation in order to have better site with efficient energy-conservation. The stone or brick material on a building can be replaced by colored concrete, or more trees and lampposts can be placed on the site. Such flexibility in simulation and animation allows creative ideas in the design and orientation of urban sites to be demonstrated to citizens and decision makers before final realization.
Download or read book Numerical Methods in Geotechnical Engineering written by Michael A. Hicks and published by CRC Press. This book was released on 2014-05-29 with total page 1343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering contains the proceedings of the 8th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2014, Delft, The Netherlands, 18-20 June 2014). It is the eighth in a series of conferences organised by the European Regional Technical Committee ERTC7 under the auspices of the International
Download or read book Computer Aided Numerical Methods in Psychology written by PressGrup Academician Team and published by Bilal Semih Bozdemir. This book was released on with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Psychology: Computer-Aided Numerical Methods Introduction to Numerical Methods in Psychology Advantages of Computer-Aided Numerical Analysis Data Collection and Preprocessing Linear Regression and Correlation Analysis Logistic Regression and Classification Principal Component Analysis (PCA) Cluster Analysis Time Series Analysis Bayesian Methods and Inference Monte Carlo Simulation Techniques Optimization Algorithms in Psychological Research Visualization and Interpretation of Results Practical Applications and Case Studies
Download or read book Subsurface Environmental Modelling Between Science and Policy written by Dirk Scheer and published by Springer Nature. This book was released on 2020-07-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad overview of essential features of subsurface environmental modelling at the science-policy interface, offering insights into the potential challenges in the field of subsurface flow and transport, as well as the corresponding computational modelling and its impact on the area of policy- and decision-making. The book is divided into two parts: Part I presents models, methods and software at the science-policy interface. Building on this, Part II illustrates the specifications using detailed case studies of subsurface environmental modelling. It also includes a systematic research overview and discusses the anthropogenic use of the subsurface, with a particular focus on energy-related technologies, such as carbon sequestration, geothermal technologies, fluid and energy storage, nuclear waste disposal, and unconventional oil and gas recovery.
Download or read book Environmental Modelling and Prediction written by Gongbing Peng and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors consider the natural environment as an integrated system. The physical, chemical and biological processes that govern the behaviour of the environmental system can thus be understood through mathematical modelling, and their evolution can be studied by means of numerical simulation. The book contains a summary of various efficient approaches in atmospheric prediction, such as numerical weather prediction and statistical forecast of climate change, as well as other successful methods in land surface modelling. The authors explore new theories and methods in environment prediction such as systems analysis and information theory. Attention is given to new achievements in remote sensing tele-metering and geographic information systems.
Download or read book Environmental Geomechanics written by Laurent Vulliet and published by EPFL Press. This book was released on 2002-01-01 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Calibration and Parameter Estimation written by Ne-Zheng Sun and published by Springer. This book was released on 2015-07-01 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-part book provides a comprehensive and systematic introduction to these challenging topics such as model calibration, parameter estimation, reliability assessment, and data collection design. Part 1 covers the classical inverse problem for parameter estimation in both deterministic and statistical frameworks, Part 2 is dedicated to system identification, hyperparameter estimation, and model dimension reduction, and Part 3 considers how to collect data and construct reliable models for prediction and decision-making. For the first time, topics such as multiscale inversion, stochastic field parameterization, level set method, machine learning, global sensitivity analysis, data assimilation, model uncertainty quantification, robust design, and goal-oriented modeling, are systematically described and summarized in a single book from the perspective of model inversion, and elucidated with numerical examples from environmental and water resources modeling. Readers of this book will not only learn basic concepts and methods for simple parameter estimation, but also get familiar with advanced methods for modeling complex systems. Algorithms for mathematical tools used in this book, such as numerical optimization, automatic differentiation, adaptive parameterization, hierarchical Bayesian, metamodeling, Markov chain Monte Carlo, are covered in details. This book can be used as a reference for graduate and upper level undergraduate students majoring in environmental engineering, hydrology, and geosciences. It also serves as an essential reference book for professionals such as petroleum engineers, mining engineers, chemists, mechanical engineers, biologists, biology and medical engineering, applied mathematicians, and others who perform mathematical modeling.
Download or read book Computational Fluid Flow and Heat Transfer written by Mukesh Kumar Awasthi and published by CRC Press. This book was released on 2024-04-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text provides insight into the different mathematical tools and techniques that can be applied to the analysis and numerical computations of flow models. It further discusses important topics such as the heat transfer effect on boundary layer flow, modeling of flows through porous media, anisotropic polytrophic gas model, and thermal instability in viscoelastic fluids. This book: Discusses modeling of Rayleigh-Taylor instability in nanofluid layer and thermal instability in viscoelastic fluids Covers open FOAM simulation of free surface problems, and anisotropic polytrophic gas model Highlights the Sensitivity Analysis in Aerospace Engineering, MHD Flow of a Micropolar Hybrid Nanofluid, and IoT-Enabled Monitoring for Natural Convection Presents thermal behavior of nanofluid in complex geometries and heat transfer effect on Boundary layer flow Explains natural convection heat transfer in non-Newtonian fluids and homotropy series solution of the boundary layer flow Illustrates modeling of flows through porous media and investigates Shock-driven Richtmyer-Meshkov instability It is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of Applied Sciences, Mechanical Engineering, Manufacturing Engineering, Production Engineering, Industrial engineering, Automotive engineering, and Aerospace engineering.
Download or read book Environmental Implications of the New Energy Plan written by United States. Congress. House. Committee on Science and Technology. Subcommittee on the Environment and the Atmosphere and published by . This book was released on 1978 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for 1983 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1982 with total page 1716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for 1982 Department of Energy budget justifications written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1981 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Air Pollution Modeling for Environmental Security written by István Faragó and published by Springer Science & Business Media. This book was released on 2005-11-11 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The protection of our environment is one of the major problems in the society. More and more important physical and chemical mechanisms are to be added to the air pollution models. Moreover, new reliable and robust control strategies for keeping the pollution caused by harmful compounds under certain safe levels have to be developed and used in a routine way. Well based and correctly analyzed large mathematical models can successfully be used to solve this task. The use of such models leads to the treatment of huge computational tasks. The efficient solution of such problems requires combined research from specialists working in different fields. The aim of the NATO Advanced Research Workshop (NATO ARW) entitled “Advances in Air Pollution Modeling for Environmental Security” was to invite specialists from all areas related to large-scale air pollution modeling and to exchange information and plans for future actions towards improving the reliability and the scope of application of the existing air pollution models and tools. This ARW was planned to be an interdisciplinary event, which provided a forum for discussions between physicists, meteorologists, chemists, computer scientists and specialists in numerical analysis about different ways for improving the performance and the quality of the results of different air pollution models.
Download or read book Numerical Methods and Applications written by Ivan Lirkov and published by Springer Science & Business Media. This book was released on 2003 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
