Download or read book Advanced methods of mathematical modeling and experimental study in oil and gas reservoirs written by Fuyong Wang and published by Frontiers Media SA. This book was released on 2023-07-05 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Methods for Processing and Visualizing the Renewable Energy written by Samsul Ariffin Abdul Karim and published by Springer Nature. This book was released on 2020-10-21 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of research work conducted by researchers at Centre for Smart Grid Energy Research (CSMER), Institute of Autonomous System, Universiti Teknologi PETRONAS (UTP), and Seismic Modelling and Inversion Group, King Abdullah University of Science and Technology (KAUST), Saudi Arabia. The book covers topics in the field of renewable energy where visualization, artificial neural network and deep learning techniques have been applied to optimize the performance of various applications in energy-related industries. These examples include a natural gas vehicle (NGV), a single axis and a fixed axis solar tracker, seismic inversion enhanced oil recovery, viability of a PV system and construction of a septic B-spline tensor product scheme. Readers will benefit from these examples, which describe the current trend of energy optimization techniques in renewable energy applications making it a good reference for the researchers and industrial practitioners working in the field of renewable energy and optimization techniques.
Download or read book Mathematical Methods and Modelling in Hydrocarbon Exploration and Production written by Armin Iske and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrocarbon exploration and production incorporate great technology challenges for the oil and gas industry. In order to meet the world's future demand for oil and gas, further technological advance is needed, which in turn requires research across multiple disciplines, including mathematics, geophysics, geology, petroleum engineering, signal processing, and computer science. This book addresses important aspects and fundamental concepts in hydrocarbon exploration and production. Moreover, new developments and recent advances in the relevant research areas are discussed, whereby special emphasis is placed on mathematical methods and modelling. The book reflects the multi-disciplinary character of the hydrocarbon production workflow, ranging from seismic data imaging, seismic analysis and interpretation and geological model building, to numerical reservoir simulation. Various challenges concerning the production workflow are discussed in detail. The thirteen chapters of this joint work, authored by international experts from academic and industrial institutions, include survey papers of expository character as well as original research articles. Large parts of the material presented in this book were developed between November 2000 and April 2004 through the European research and training network NetAGES, "Network for Automated Geometry Extraction from Seismic". The new methods described here are currently being implemented as software tools at Schlumberger Stavanger Research, one of the world's largest service providers to the oil industry.
Download or read book Advanced Petroleum Reservoir Simulation written by M. R. Islam and published by John Wiley & Sons. This book was released on 2010-10-26 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Petroleum Reservoir Simulation Add precision and ease to the process of reservoir simulation. Until simulation software and other methods of reservoir characterization were developed, engineers had to drill numerous wells to find the best way to extract crude oil and natural gas. Today, even with highly sophisticated reservoir simulations software available, reservoir simulation still involves a great deal of guesswork. Advanced Petroleum Reservoir Simulation provides an advanced approach to petroleum reservoir simulation, taking the guesswork out of the process and relying more thoroughly on science and what is known about the individual reservoir. This state of the art publication in petroleum simulation: Describes solution techniques that allow multiple solutions to the complete equations, without linearization. Solves the most difficult reservoir engineering problems such as viscous fingering. Highlights the importance of non-linear solvers on decision tree with scientific argument. Discusses solution schemes in relation to other disciplines and revolutionizes risk analysis and decision making. Includes companion software with 3-D, 3-phase multipurpose simulator code available for download from www.scrivenerpublishing.com. By providing a valuable tool to support reservoir simulation predictions with real science, this book is an essential reference for engineers, scientists and geologists.
Download or read book Reservoir Simulation written by Zhangxin Chen and published by SIAM. This book was released on 2007-01-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an overview of classical reservoir engineering and basic reservoir simulation methods, this book then progresses through a discussion of types of flows - single-phase, two-phase, black oil (three-phase), single phase with multi-components, compositional, and thermal. The author provides a thorough glossary of petroleum engineering terms and their units, along with basic flow and transport equations and their unusual features, and corresponding rock and fluid properties. The book also summarises the practical aspects of reservoir simulation, such as data gathering and analysis, and reservoir performance prediction. Suitable as a text for advanced undergraduate and first-year graduate students in geology, petroleum engineering, and applied mathematics; as a reference book; or as a handbook for practitioners in the oil industry. Prerequisites are calculus, basic physics, and some knowledge of partial differential equations and matrix algebra.
Download or read book Challenges in Modelling and Simulation of Shale Gas Reservoirs written by Jebraeel Gholinezhad and published by Springer. This book was released on 2017-12-27 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the problems involved in the modelling and simulation of shale gas reservoirs, and details recent advances in the field. It discusses various modelling and simulation challenges, such as the complexity of fracture networks, adsorption phenomena, non-Darcy flow, and natural fracture networks, presenting the latest findings in these areas. It also discusses the difficulties of developing shale gas models, and compares analytical modelling and numerical simulations of shale gas reservoirs with those of conventional reservoirs. Offering a comprehensive review of the state-of-the-art in developing shale gas models and simulators in the upstream oil industry, it allows readers to gain a better understanding of these reservoirs and encourages more systematic research on efficient exploitation of shale gas plays. It is a valuable resource for researchers interested in the modelling of unconventional reservoirs and graduate students studying reservoir engineering. It is also of interest to practising reservoir and production engineers.
Download or read book Inventory of Federal Energy related Environment and Safety Research for written by and published by . This book was released on 1980 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Nanofluids and Their Engineering Applications written by K.R.V. Subramanian and published by CRC Press. This book was released on 2019-06-18 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are solid-liquid composite material consisting of solid nanoparticles suspended in liquid with enhanced thermal properties. This book introduces basic fluid mechanics, conduction and convection in fluids, along with nanomaterials for nanofluids, property characterization, and outline applications of nanofluids in solar technology, machining and other special applications. Recent experiments on nanofluids have indicated significant increase in thermal conductivity compared with liquids without nanoparticles or larger particles, strong temperature dependence of thermal conductivity, and significant increase in critical heat flux in boiling heat transfer, all of which are covered in the book. Key Features Exclusive title focusing on niche engineering applications of nanofluids Contains high technical content especially in the areas of magnetic nanofluids and dilute oxide based nanofluids Feature examples from research applications such as solar technology and heat pipes Addresses heat transfer and thermodynamic features such as efficiency and work with mathematical rigor Focused in content with precise technical definitions and treatment
Download or read book Mathematical Models and Finite Elements for Reservoir Simulation written by G. Chavent and published by Elsevier. This book was released on 1986-01-01 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulators for oil reservoirs have been developed over the last twenty years and are now widely used by oil companies. The research, however, has taken place largely within the industry itself, and has remained somewhat inaccessible to the scientific community. This book hopes to remedy the situation by means of its synthesized presentation of the models used in reservoir simulation, in a form understandable to both mathematicians and engineers.The book aims to initiate a rigorous mathematical study of the immiscible flow models, partly by using the novel `global pressure' approach in treating incompressible two-phase problems. A finite element approximation technique based on the global pressure variational model is presented, and new approaches to the modelling of various kinds of multiphase flow through porous media are introduced.Much of the material is highly original, and has not been presented elsewhere. The mathematical and numerical models should be of great interest to applied mathematicians, and to engineers seeking an alternative approach to reservoir modelling.
Download or read book Reservoir Simulations written by Shuyu Sun and published by Gulf Professional Publishing. This book was released on 2020-06-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Simulation: Machine Learning and Modeling helps the engineer step into the current and most popular advances in reservoir simulation, learning from current experiments and speeding up potential collaboration opportunities in research and technology. This reference explains common terminology, concepts, and equations through multiple figures and rigorous derivations, better preparing the engineer for the next step forward in a modeling project and avoid repeating existing progress. Well-designed exercises, case studies and numerical examples give the engineer a faster start on advancing their own cases. Both computational methods and engineering cases are explained, bridging the opportunities between computational science and petroleum engineering. This book delivers a critical reference for today’s petroleum and reservoir engineer to optimize more complex developments. Understand commonly used and recent progress on definitions, models, and solution methods used in reservoir simulation World leading modeling and algorithms to study flow and transport behaviors in reservoirs, as well as the application of machine learning Gain practical knowledge with hand-on trainings on modeling and simulation through well designed case studies and numerical examples.
Download or read book Technologies and Mathematical Modeling of Fines assisted Oil and Gas Recovery written by Abbas Zeinijahromi and published by . This book was released on 2012 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a PhD thesis by publication. It includes seven published/accepted for publication journal papers and two submitted papers in academic peer reviewed journals. The content of the thesis is also published in ten full volume technical papers of Society of Petroleum Engineering (SPE). The thesis develops a theory for single and two-phase flow in porous media accounting for mobilization, migration, and straining of the natural reservoir fines. This phenomenon has been widely reported in laboratory studies and also well history data. The existing mathematical model, widely used in petroleum reservoir simulation, does not agree with laboratory observations. It contains phenomenological empirical constants which cannot be predicted theoretically. The new closed system of governing equations, proposed in the current thesis, is free of the above mentioned shortcomings. The proposed system contains a new theoretical function describing the rock capacity to liberate fines so-called maximum retention function. This function is based on the micro scale conditions of mechanical equilibrium of fine particles in the porous space. The mechanical equilibrium condition is a torque balance of drag, lifting, electrostatic, gravity, and capillary forces. The maximum retention function is derived for both single-phase and two-phase flows in porous media. The comparison between the modified particle detachment model and the maximum retention function and laboratory and well data has shown a good agreement, which validates the model. An exact analytical solution for single-phase flow in porous media with alternating velocity accounting for fines lifting has been derived, allowing for mathematical description of a laboratory test on the suspension injection into reservoir cores with alternating velocities. Good agreement between the laboratory test results and the mathematical modeling predictions validates the theory developed. Both analytical and numerical models for two-phase flow with induced fines migration have been developed. In reservoir scale approximation, the equivalence between the fines assisted water-flood and adsorption-free polymer flood has been investigated. It allows using the existing commercial simulators to model low salinity water-flood. The results of the modeling allow proposing a new technologically effective and economical method for improved sweep efficiency by fines assisted water-flooding. Moreover, modeling of low salinity water injection shows that permeability reduction due to induced fines migration can slow down the encroaching water in oil/gas reservoir under strong water support. It decreases water production during pressure depletion of oil/gas reservoirs and improves the recovery. Also, a small volume injection of low salinity water can be used to reduce the water conning problem in oil/gas wells and prolong the wells production life.
Download or read book Physical and Mathematical Modeling of Earth and Environment Processes written by Vladimir Karev and published by Springer. This book was released on 2018-03-24 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of collaboration within the framework of the Third International Scientific School for Young Scientists held at the Ishlinskii Institute for Problems in Mechanics of Russian Academy of Sciences, 2017, November. The papers included describe studies on the dynamics of natural system – geosphere, hydrosphere, atmosphere—and their interactions, the human contribution to naturally occurring processes, laboratory modeling of earth and environment processes, and testing of new developed physical and mathematical models. The book particularly focuses on modeling in the field of oil and gas production as well as new alternative energy sources.
Download or read book Advanced Modeling with the MATLAB Reservoir Simulation Toolbox written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2021-11-25 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many leading experts contribute to this follow-up to An Introduction to Reservoir Simulation using MATLAB/GNU Octave: User Guide for the MATLAB Reservoir Simulation Toolbox (MRST). It introduces more advanced functionality that has been recently added to the open-source MRST software. It is however a self-contained introduction to a variety of modern numerical methods for simulating multiphase flow in porous media, with applications to geothermal energy, chemical enhanced oil recovery (EOR), flow in fractured and unconventional reservoirs, and in the unsaturated zone. The reader will learn how to implement new models and algorithms in a robust, efficient manner. A large number of numerical examples are included, all fully equipped with code and data so that the reader can reproduce the results and use them as a starting point for their own work. Like the original textbook, this book will prove invaluable for researchers, professionals and advanced students using reservoir simulation methods. This title is available as Open Access on Cambridge Core.
Download or read book Oil Shales and Tar Sands written by United States. Department of Energy and published by . This book was released on 1977 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mathematics of Reservoir Simulation written by Richard E. Ewing and published by SIAM. This book was released on 2014-12-01 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state of the art of the mathematical theory and numerical analysis of imaging. Some of the applications covered in the book include computerized tomography, magnetic resonance imaging, emission tomography, electron microscopy, ultrasound transmission tomography, industrial tomography, seismic tomography, impedance tomography, and NIR imaging.