Download or read book Advanced Methods for Geometric Modeling and Numerical Simulation written by Carlotta Giannelli and published by Springer Nature. This book was released on 2019-09-18 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected contributions presented at the INdAM Workshop “DREAMS”, held in Rome, Italy on January 22−26, 2018. Addressing cutting-edge research topics and advances in computer aided geometric design and isogeometric analysis, it covers distinguishing curve/surface constructions and spline models, with a special focus on emerging adaptive spline constructions, fundamental spline theory and related algorithms, as well as various aspects of isogeometric methods, e.g. efficient quadrature rules and spectral analysis for isogeometric B-spline discretizations. Applications in finite element and boundary element methods are also discussed. Given its scope, the book will be of interest to both researchers and graduate students working in these areas.
Download or read book Meshing Geometric Modeling and Numerical Simulation Volume 2 written by Paul Louis George and published by John Wiley & Sons. This book was released on 2019-05-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triangulations, and more precisely meshes, are at the heart of many problems relating to a wide variety of scientific disciplines, and in particular numerical simulations of all kinds of physical phenomena. In numerical simulations, the functional spaces of approximation used to search for solutions are defined from meshes, and in this sense these meshes play a fundamental role. This strong link between meshes and functional spaces leads us to consider advanced simulation methods in which the meshes are adapted to the behaviors of the underlying physical phenomena. This book presents the basic elements of this vision of meshing. These mesh adaptations are generally governed by a posteriori error estimators representing an increase of the error with respect to a size or metric. Independently of this metric of calculation, compliance with a geometry can also be calculated using a so-called geometric metric. The notion of mesh thus finds its meaning in the metric of its elements.
Download or read book Meshing Geometric Modeling and Numerical Simulation 1 written by Houman Borouchaki and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triangulations, and more precisely meshes, are at the heart of many problems relating to a wide variety of scientific disciplines, and in particular numerical simulations of all kinds of physical phenomena. In numerical simulations, the functional spaces of approximation used to search for solutions are defined from meshes, and in this sense these meshes play a fundamental role. This strong link between the meshes and functional spaces leads us to consider advanced simulation methods in which the meshes are adapted to the behaviors of the underlying physical phenomena. This book presents the basic elements of this meshing vision.
Download or read book Isogeometric Methods for Numerical Simulation written by Gernot Beer and published by Springer. This book was released on 2015-01-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state of the art in isogeometric modeling and shows how the method has advantaged. First an introduction to geometric modeling with NURBS and T-splines is given followed by the implementation into computer software. The implementation in both the FEM and BEM is discussed.
Download or read book Meshing Geometric Modeling and Numerical Simulation 3 written by Paul Louis George and published by John Wiley & Sons. This book was released on 2020-12-22 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triangulations, and more precisely meshes, are at the heart of many problems relating to a wide variety of scientific disciplines, and in particular numerical simulations of all kinds of physical phenomena. In Volume 1, the theoretical foundations relating to triangulations, finite element shape functions and their interpretations as geometric patches were explored. This has made it possible to build tools that make the geometric modeling of any object possible. These elements are used in Volume 2 to treat meshing problems in their different implementations. Meshing, Geometric Modeling and Numerical Simulation 3 offers technical additions to the methods seen in the first two volumes and a significant portion of this book is dedicated to mesh visualization problems and solutions, especially those with a high degree of complexity.
Download or read book Meshing Geometric Modeling and Numerical Simulation Volume 2 written by Paul Louis George and published by John Wiley & Sons. This book was released on 2019-01-24 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triangulations, and more precisely meshes, are at the heart of many problems relating to a wide variety of scientific disciplines, and in particular numerical simulations of all kinds of physical phenomena. In numerical simulations, the functional spaces of approximation used to search for solutions are defined from meshes, and in this sense these meshes play a fundamental role. This strong link between meshes and functional spaces leads us to consider advanced simulation methods in which the meshes are adapted to the behaviors of the underlying physical phenomena. This book presents the basic elements of this vision of meshing. These mesh adaptations are generally governed by a posteriori error estimators representing an increase of the error with respect to a size or metric. Independently of this metric of calculation, compliance with a geometry can also be calculated using a so-called geometric metric. The notion of mesh thus finds its meaning in the metric of its elements.
Download or read book Analysis Geometry and Modeling in Finance written by Pierre Henry-Labordere and published by CRC Press. This book was released on 2008-09-22 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Geometry, and Modeling in Finance: Advanced Methods in Option Pricing is the first book that applies advanced analytical and geometrical methods used in physics and mathematics to the financial field. It even obtains new results when only approximate and partial solutions were previously available.Through the problem of option pricing, th
Download or read book Geometric Modeling written by Hans Hagen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lectures presented at an international workshop on geometric modeling held at Hewlett Packard GmbH in Boblingen, FRG, in June 1990. International experts from academia and industry were selected to speak on the most interesting topics in geometric modeling. The resulting papers, published in this volume, give a state-of-the-art survey of the relevant problems and issues. The following topics are discussed: - Methods for constructing surfaces on surfaces: four different solutions to the multidimen sional problem of constructing an interpolant from surface data are provided. - Surfaces in solid modeling: current results on the implementation of free-fonn solids in three well established solid models are reviewed. - Box splines and applications: an introduction to box spline methods for the representation of surfaces is given. Basic properties of box splines are derived, and refinement and evaluation methods for box splines are presented in detail. Shape preserving properties, the construction of non-rectangular box spline surfaces, applications to surface modeling, and imbedding problems, are discussed. - Advanced computer graphics techniques for volume visualization: the steps to be executed in the visualization process of volume data are described and tools are discussed that assist in handling this data. - Rational B-splines: an introduction to the representation of curves and surfaces using rational B-splines is given, together with a critical evaluation of their potential for industrial application.
Download or read book Geometric Modeling and Mesh Generation from Scanned Images written by Yongjie Jessica Zhang and published by CRC Press. This book was released on 2016-04-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-Edge Techniques to Better Analyze and Predict Complex Physical Phenomena Geometric Modeling and Mesh Generation from Scanned Images shows how to integrate image processing, geometric modeling, and mesh generation with the finite element method (FEM) to solve problems in computational biology, medicine, materials science, and engineering. Based on the author’s recent research and course at Carnegie Mellon University, the text explains the fundamentals of medical imaging, image processing, computational geometry, mesh generation, visualization, and finite element analysis. It also explores novel and advanced applications in computational biology, medicine, materials science, and other engineering areas. One of the first to cover this emerging interdisciplinary field, the book addresses biomedical/material imaging, image processing, geometric modeling and visualization, FEM, and biomedical and engineering applications. It introduces image-mesh-simulation pipelines, reviews numerical methods used in various modules of the pipelines, and discusses several scanning techniques, including ones to probe polycrystalline materials. The book next presents the fundamentals of geometric modeling and computer graphics, geometric objects and transformations, and curves and surfaces as well as two isocontouring methods: marching cubes and dual contouring. It then describes various triangular/tetrahedral and quadrilateral/hexahedral mesh generation techniques. The book also discusses volumetric T-spline modeling for isogeometric analysis (IGA) and introduces some new developments of FEM in recent years with applications.
Download or read book Advanced Numerical Simulation Methods written by Gernot Beer and published by CRC Press. This book was released on 2015-07-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This entertaining introduction to advanced numerical modeling aims to lead the reader on a journey towards theholy grail of numerical simulation, i.e. one without the requirement of mesh generation, that takes data directly from CAD programs. This hands-on book emphasizes implementation and examples of programming in a higher level language are given. Written for users of simulation software, so they can understand the benefits of this new technology and demand progress from a somewhat conservative industry. Written for software developers, so they can see that this is a technology with a big future and written for researchers, in the hope that it will attract more people to work in this field.
Download or read book Approximation and Modeling with B Splines written by Klaus Hollig and published by SIAM. This book was released on 2015-07-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: B-splines are fundamental to approximation and data fitting, geometric modeling, automated manufacturing, computer graphics, and numerical simulation. With an emphasis on key results and methods that are most widely used in practice, this textbook provides a unified introduction to the basic components of B-spline theory: approximation methods (mathematics), modeling techniques (engineering), and geometric algorithms (computer science). A supplemental Web site will provide a collection of problems, some with solutions, slides for use in lectures, and programs with demos.
Download or read book Geometric Modeling Techniques Applications Systems and Tools written by Muhammad Sarfraz and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided techniques, Applications, Systems and tools for Geometric Modeling are extremely useful in a number of academic and industrial settings. Specifically, Computer Aided Geometric Modeling (CAGM) plays a significant role in the construction of - signing and manufacturing of various objects. In addition to its cri- cal importance in the traditional fields of automobile and aircraft manufacturing, shipbuilding, and general product design, more - cently, the CAGM methods have also proven to be indispensable in a variety of modern industries, including computer vision, robotics, medical imaging, visualization, and even media. This book aims to provide a valuable source, which focuses on - terdisciplinary methods and affiliate research in the area. It aims to provide the user community with a variety of Geometric Modeling techniques, Applications, systems and tools necessary for various real life problems in the areas such as: Font Design Medical Visualization Scientific Data Visualization Archaeology Toon Rendering Virtual Reality Body Simulation It also aims to collect and disseminate information in various dis- plines including: Curve and Surface Fitting Geometric Algorithms Scientific Visualization Shape Abstraction and Modeling Intelligent CAD Systems Computational Geometry Solid Modeling v Shape Analysis and Description Industrial Applications The major goal of this book is to stimulate views and provide a source where researchers and practitioners can find the latest dev- opments in the field of Geometric Modeling.
Download or read book Computer Graphics and Geometric Modelling written by Max K. Agoston and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Possibly the most comprehensive overview of computer graphics as seen in the context of geometric modelling, this two volume work covers implementation and theory in a thorough and systematic fashion. Computer Graphics and Geometric Modelling: Implementation and Algorithms, covers the computer graphics part of the field of geometric modelling and includes all the standard computer graphics topics. The first part deals with basic concepts and algorithms and the main steps involved in displaying photorealistic images on a computer. The second part covers curves and surfaces and a number of more advanced geometric modelling topics including intersection algorithms, distance algorithms, polygonizing curves and surfaces, trimmed surfaces, implicit curves and surfaces, offset curves and surfaces, curvature, geodesics, blending etc. The third part touches on some aspects of computational geometry and a few special topics such as interval analysis and finite element methods. The volume includes two companion programs.
Download or read book Geometric Challenges in Isogeometric Analysis written by Carla Manni and published by Springer Nature. This book was released on 2022-08-08 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected contributions presented at the INdAM Workshop "Geometric Challenges in Isogeometric Analysis", held in Rome, Italy on January 27-31, 2020. It gives an overview of the forefront research on splines and their efficient use in isogeometric methods for the discretization of differential problems over complex and trimmed geometries. A variety of research topics in this context are covered, including (i) high-quality spline surfaces on complex and trimmed geometries, (ii) construction and analysis of smooth spline spaces on unstructured meshes, (iii) numerical aspects and benchmarking of isogeometric discretizations on unstructured meshes, meshing strategies and software. Given its scope, the book will be of interest to both researchers and graduate students working in the areas of approximation theory, geometric design and numerical simulation. Chapter 10 is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Numerical Simulation Advanced Techniques for Science and Engineering written by Ali Soofastaei and published by BoD – Books on Demand. This book was released on 2023-11-15 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation is a powerful tool used in various fields of science and engineering to model complex systems and predict their behavior. It involves developing mathematical models that describe the behavior of a system and using computer algorithms to solve these models numerically. By doing so, researchers and engineers can study the behavior of a system in detail, which may only be possible with analytical methods. Numerical simulation has many advantages over traditional analytical methods. It allows researchers and engineers to study complex systems’ behavior in detail and predict their behavior in different scenarios. It also allows for the optimization of systems and the identification of design flaws before they are built. However, numerical simulation has its limitations. It requires significant computational resources, and the accuracy of the results depends on the quality of the mathematical models and the discretization methods used. Nevertheless, numerical simulation remains a valuable tool in many fields and its importance is likely to grow as computational resources become more powerful and widely available. Numerical simulation is widely used in physics, engineering, computer science, and mathematics. In physics, for example, numerical simulation is used to study the behavior of complex systems such as weather patterns, fluid dynamics, and particle interactions. In engineering, it is used to design and optimize systems such as aircraft, cars, and buildings. In computer science, numerical simulation models and optimization algorithms and data structures. In mathematics, it is used to study complex mathematical models and to solve complex equations. This book familiarizes readers with the practical application of the numerical simulation technique to solve complex analytical problems in different industries and sciences.
Download or read book Advanced Geometric Modelling for Engineering Applications written by Frank-Lothar Krause and published by North Holland. This book was released on 1990 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future generations of Computer-Aided Design (CAD) systems are expected to offer powerful support for the functional, geometrical and technological description of products. New intelligent system architectures covering feature modelling, knowledge processing and simulation techniques, as well as comprehensive information access capabilities will open novel possibilities for product modelling. The result will be a real opportunity for direct cooperation between human creativity/discernment and information processing systems, working together to draft and analyze technical products. In this book, leading researchers and system developers present, discuss and summarize research and development of new theories, as well as advanced applications of geometric modelling.
Download or read book Theory and Practice of Geometric Modeling written by Wolfgang Straßer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a result of the lectures and discussions during the conference "Theory and Practice of Geometric Modeling". The event has been organized by the Wilhelm-Schickard-Institut fiir Informatik, Universitat Tiibingen and took place at the Heinrich-Fabri-Institut in Blaubeuren from October 3 to 7, 1988. The conference brought together leading experts from academic and industrial research institutions, CAD system developers and experien ced users to exchange their ideas and to discuss new concepts and future directions in geometric modeling. The main intention has been to bridge the gap between theoretical results, performance of existing CAD systems and the real problems of users. The contents is structured in five parts: A Algorithmic Aspects B Surface Intersection, Blending, Ray Tracing C Geometric Tools D Different Representation Schemes in Solid Modeling E Product Modeling in High Level Specifications The material presented in this book reflects the current state of the art in geometric modeling and should therefore be of interest not only to university and industry researchers, but also to system developers and practitioners who wish to keep up to date on recent advances and new concepts in this rapidly expanding field. The editors express their sincere appreciation to the contributing authors, and to the members of the program committee, W. Boehm, J. Hoschek, A. Massabo, H. Nowacki, M. Pratt, J. Rossignac, T. Sederberg and W. Tiller, for their close cooperation and their time and effort that made the conference and this book a success.
