Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Xi written by Alistair B Forbes and published by World Scientific. This book was released on 2018-10-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed contributions by researchers from institutions and laboratories across the world that are involved in metrology and testing. They were adapted from presentations made at the eleventh edition of the Advanced Mathematical and Computational Tools in Metrology and Testing conference held at the University of Strathclyde, Glasgow, in September 2017, organized by IMEKO Technical Committee 21, the National Physical Laboratory, UK, and the University of Strathclyde. The papers present new modeling approaches, algorithms and computational methods for analyzing data from metrology systems and for evaluation of the measurement uncertainty, and describe their applications in a wide range of measurement areas.This volume is useful to all researchers, engineers and practitioners who need to characterize the capabilities of measurement systems and evaluate measurement data. Through the papers written by experts working in leading institutions, it covers the latest computational approaches and describes applications to current measurement challenges in engineering, environment and life sciences.
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing XII written by Franco Pavese and published by World Scientific Publishing Company. This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Description of state-of-the-art techniques for modeling measurement systems and analyzing measurement data. Written by researchers active in institutions developing world-leading measurement capabilities. Provides a multi-disciplinary approach to addressing measurement challenges in a wide range of application domains"--
Download or read book Advanced Mathematical and Computational Tools in Metrology and Testing IX written by Franco Pavese and published by World Scientific. This book was released on 2012 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed worldwide contributions. They were prompted by presentations made at the ninth AMCTM Conference held in G teborg (Sweden) in June 2011 on the theme of advanced mathematical and computational tools in metrology and also, in the title of this book series, in testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also in keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards.
Download or read book Advanced Mathematical Computational Tools in Metrology Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Viii written by Franco Pavese and published by World Scientific. This book was released on 2009-04-15 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields.This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Xii written by Franco Pavese and published by World Scientific. This book was released on 2022-01-13 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original, refereed contributions by researchers from national metrology institutes, universities and laboratories across the world involved in metrology and testing. The volume has been produced by the International Measurement Confederation Technical Committee 21, Mathematical Tools for Measurements and is the twelfth in the series. The papers cover topics in numerical analysis and computational tools, statistical inference, regression, calibration and metrological traceability, computer science and data provenance, and describe applications in a wide range of application domains. This volume is useful to all researchers, engineers and practitioners who need to characterize the capabilities of measurement systems and evaluate measurement data. It will also be of interest to scientists and engineers concerned with the reliability, trustworthiness and reproducibility of data and data analytics in data-driven systems in engineering, environmental and life sciences.
Download or read book Advanced Mathematical Tools In Metrology Iii written by Patrizia Ciarlini and published by World Scientific. This book was released on 1997-08-05 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is of interest to researchers in universities, research centres and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and to whoever is working in the development of these mathematical tools. Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality as well in a better use of advanced mathematical tools and in the development of new ones. In this book scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors such as instrumentation and software, are likely to benefit from this exchange, since metrology has a high impact on the overall quality of industrial products and applied mathematics is becoming more and more important in industrial processes.
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing X written by Franco Pavese and published by World Scientific. This book was released on 2015-04-22 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains original and refereed contributions from the tenth AMCTM Conference (www.nviim.ru/AMCTM2014) held in St. Petersburg (Russia) in September 2014 on the theme of advanced mathematical and computational tools in metrology and testing.The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards.
Download or read book Measurement With Persons written by Birgitta Berglund and published by Psychology Press. This book was released on 2013-05-13 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements with persons are those in which human perception and interpretation are used for measuring complex, holistic quantities and qualities, which are perceived by the human brain and mind. Providing means for reproducible measurement of parameters such as pleasure and pain has important implications in evaluating all kind of products, services, and conditions. This book inaugurates a new era for this subject: a multi- and inter-disciplinary volume in which world-renowned scientists from the psychological, physical, biological, and social sciences reach a common understanding of measurement theory and methods. In the first section, generic theoretical and methodological issues are treated, including the conceptual basis of measurement in the various fields involved; the development of formal, representational, and probabilistic theories; the approach to experimentation; and the theories, models, and methods for multidimensional problems. In the second section, several implementation areas are presented, including sound, visual, skin, and odor perception, functional brain imagining, body language and emotions, and, finally, the use of measurements in decision making Measurement with Persons will appeal to a wide audience across a range of sciences, including general psychology and psychophysics, measurement theory, metrology and instrumentation, neurophysiology, engineering, biology, and chemistry.
Download or read book Data Modeling for Metrology and Testing in Measurement Science written by Franco Pavese and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provide a comprehensive set of modeling methods for data and uncertainty analysis, taking readers beyond mainstream methods and focusing on techniques with a broad range of real-world applications. The book will be useful as a textbook for graduate students, or as a training manual in the fields of calibration and testing. The work may also serve as a reference for metrologists, mathematicians, statisticians, software engineers, chemists, and other practitioners with a general interest in measurement science.
Download or read book Advanced Mathematical Tools In Metrology Proceedings Of The International Workshop written by Nicola Bellomo and published by World Scientific. This book was released on 1994-05-18 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will interest researchers and others involved with high-precision measurements and the development of mathematical tools for this purpose. Advances in metrology depend on improvements in scientific and technical knowledge, the quality of instruments, a better use of advanced mathematical tools and the development of new ones.A tradition of close cooperation between metrologists and mathematicians, while found elsewhere, is lacking in Italy. This workshop wishes to start such a cooperation by providing a common meeting ground. Several industrial sectors, particularly those of instrumentation and software, are likely to benefit from this process, since metrology has a high impact on the overall quality of industrial products and applied mathematics is becoming increasingly important in industrial processes.
Download or read book Advanced Mathematical and Computational Tools in Metrology VI written by P. Ciarlini and published by World Scientific. This book was released on 2004 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects refereed contributions based on the presentations made at the Sixth Workshop on Advanced Mathematical and Computational Tools in Metrology, held at the Istituto di Metrologia OC G. ColonnettiOCO (IMGC), Torino, Italy, in September 2003. It provides a forum for metrologists, mathematicians and software engineers that will encourage a more effective synthesis of skills, capabilities and resources, and promotes collaboration in the context of EU programmes, EUROMET and EA projects, and MRA requirements. It contains articles by an important, worldwide group of metrologists and mathematicians involved in measurement science and, together with the five previous volumes in this series, constitutes an authoritative source for the mathematical, statistical and software tools necessary to modern metrology. The proceedings have been selected for coverage in: . OCo Index to Scientific & Technical Proceedings- (ISTP- / ISI Proceedings). OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings). OCo CC Proceedings OCo Engineering & Physical Sciences."
Download or read book Coordinate Metrology written by Jerzy A. Sładek and published by Springer. This book was released on 2015-12-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on effective methods for assessing the accuracy of both coordinate measuring systems and coordinate measurements. It mainly reports on original research work conducted by Sladek’s team at Cracow University of Technology’s Laboratory of Coordinate Metrology. The book describes the implementation of different methods, including artificial neural networks, the Matrix Method, the Monte Carlo method and the virtual CMM (Coordinate Measuring Machine), and demonstrates how these methods can be effectively used in practice to gauge the accuracy of coordinate measurements. Moreover, the book includes an introduction to the theory of measurement uncertainty and to key techniques for assessing measurement accuracy. All methods and tools are presented in detail, using suitable mathematical formulations and illustrated with numerous examples. The book fills an important gap in the literature, providing readers with an advanced text on a topic that has been rapidly developing in recent years. The book is intended for master and PhD students, as well as for metrology engineers working at industrial and research laboratories. It not only provides them with a solid background for using existing coordinate metrology methods; it is also meant to inspire them to develop the state-of-the-art technologies that will play an important role in supporting quality growth and innovation in advanced manufacturing.
Download or read book Advanced Mathematical Computational Tools in Metrology IV written by P. Ciarlini and published by World Scientific. This book was released on 2000 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in metrology depend on improvements in scientific and technical knowledge and in instrumentation quality, as well as better use of advanced mathematical tools and development of new ones. In this volume, scientists from both the mathematical and the metrological fields exchange their experiences. Industrial sectors, such as instrumentation and software, are likely to benefit from this exchange, since metrology has a high impact on the overall quality of industrial products, and applied mathematics is becoming more and more important in industrial processes.This book is of interest to people in universities, research centers and industries who are involved in measurements and need advanced mathematical tools to solve their problems, and to those developing such mathematical tools.
Download or read book Machine Tool Metrology written by Graham T. Smith and published by Springer. This book was released on 2016-04-06 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field.
Download or read book Metrology in Industry written by French College of Metrology and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is an integral part of the structure of today’s world: navigation and telecommunications require highly accurate time and frequency standards; human health and safety relies on authoritative measurements in diagnosis and treatment, as does food production and trade; global climate studies also depend on reliable and consistent data. Moreover, international trade practices increasingly require institutions to display demonstrated conformity to written standards and specifications. As such, having relevant and reliable results of measurements and tests in compliance with mutually recognised standards can be a technical, commercial and statutory necessity for a company. This book, the results of a working group from the French College of Metrology and featuring chapters written by a range of experts from a variety of European countries, gives a comprehensive and international treatment of the subject. Academics involved in metrology as well as people involved in the metrology capacities of companies and institutions will find this book of great interest.
