Download or read book Advanced Materials for Battery Separators written by Sabu Thomas and published by Elsevier. This book was released on 2024-07-01 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials for Battery Separators focuses solely on battery separators and their significance, providing the reader with a detailed description of their use in both aqueous and non-aqueous batteries. Topics include separator requirements and classifications, as well as discussions of the different methods for the fabrication of separators, experimental techniques used for the characterization of separators, and their physical and chemical properties. It concludes with a look at the challenges and new technologies developed to improve the performance of separators. This book is a valuable reference for engineers, research scholars, and for graduates and post graduates primarily in the field of material science, electrochemistry, and polymer chemistry. It can also be useful for engineers and technologists working in both industry and the energy field. Provides a detailed discussion of separators used in battery applications Discusses the influence of nanofillers on separator performance and the analytical techniques used for the characterization of separators Explores the challenges and new technologies to improve the performance of separators
Download or read book Polymer Based Separators for Lithium Ion Batteries written by Mark T. DeMeuse and published by Elsevier. This book was released on 2021-04-02 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-Based Separators for Lithium-Ion Batteries: Production, Processing, and Properties takes a detailed, systematic approach to the development of polymer separators for lithium-ion batteries, supporting the reader in selecting materials and processes for high-performance polymer separators with enhanced properties. The book begins by introducing the polymeric materials that may be used for separators, as well as characterization techniques, before presenting the available technologies used to produce separators for use in lithium-ion batteries. Each technology is discussed in terms of the advantages and disadvantages of the chosen approach, with the properties of the separators made via each technology also summarized and compared in detail. In addition, areas for further development are addressed, and the limitations of current materials and separators in achieving those goals are highlighted. This is a valuable resource for scientists and engineers in the industry who work on polymer-based battery separators, polymers for electronic/energy applications, and new materials and processes for lithium-ion batteries. In academia, this book will be of interest to researchers and advanced students across the fields of polymer science, materials science, electronics, energy, and chemical engineering. Covers all current and new technologies used in the production of polymer battery separators for lithium-ion batteries Analyzes the connections between the various materials and processes, advantages and disadvantages, and resulting properties of different polymer-based separators Enables the reader to develop polymer separators that meet industry standards and property and performance requirements
Download or read book Lithium Ion Batteries written by Xianxia Yuan and published by CRC Press. This book was released on 2016-04-19 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a group of top scientists and engineers in academic and industrial R&D, Lithium-Ion Batteries: Advanced Materials and Technologies gives a clear picture of the current status of these highly efficient batteries. Leading international specialists from universities, government laboratories, and the lithium-ion battery industry share th
Download or read book Lithium Ion Batteries written by Xianxia Yuan and published by CRC Press. This book was released on 2011-12-14 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a group of top scientists and engineers in academic and industrial R&D, Lithium-Ion Batteries: Advanced Materials and Technologies gives a clear picture of the current status of these highly efficient batteries. Leading international specialists from universities, government laboratories, and the lithium-ion battery industry share their knowledge and insights on recent advances in the fundamental theories, experimental methods, and research achievements of lithium-ion battery technology. Along with coverage of state-of-the-art manufacturing processes, the book focuses on the technical progress and challenges of cathode materials, anode materials, electrolytes, and separators. It also presents numerical modeling and theoretical calculations, discusses the design of safe and powerful lithium-ion batteries, and describes approaches for enhancing the performance of next-generation lithium-ion battery technology. Due to their high energy density, high efficiency, superior rate capability, and long cycling life, lithium-ion batteries provide a solution to the increasing demands for both stationary and mobile power. With comprehensive and up-to-date information on lithium-ion battery principles, experimental research, numerical modeling, industrial manufacturing, and future prospects, this volume will help you not only select existing materials and technologies but also develop new ones to improve battery performance.
Download or read book Electrospun Nanofibrous Separator for Enhancing Capacity of Lithium ion Batteries written by Yifu Li and published by Springer Nature. This book was released on 2024 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials and Conversion Technologies for Personal Protective Equipment Used in the COVID 19 Pandemic written by Suresh Sundaramurthy and published by Springer Nature. This book was released on with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials for Electrochemical Devices written by Hao Huang and published by Elsevier. This book was released on 2023-09-19 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials for Electrochemical Devices discusses the electrochemical basis and application research of various advanced materials of electrochemical devices in the most fundamental perspectives of thermodynamic properties and dynamic behaviors starting from the perspective of material preparation methods. More importantly, the latest scientific research results for each kind of advanced material are also combined to further understand the nature of the materials. Finally, the prediction and evaluation of battery performances as well as the application technologies of various devices are summarized. This book is divided into four parts to comprehensively and systematically describe the related contents of energy storage materials: Preparation and Electrochemical Fundamentals of Energy Storage Materials (Part I), Electrode Materials of Electrochemical Devices (Part II), Electrolyte and Separator Materials of Electrochemical Devices (Part III), Performance Prediction and Application Technology of Electrochemical Devices (Part IV). Includes high academic level, wide coverage that is timeless Effectively promotes the development of high-performance devices and industries Provides beginners with the basic knowledge of materials science and electrochemistry, showing them the necessary experimental means for material preparation Serves as a handbook for energy storage material researchers to provide them with appropriate theoretical support and details
Download or read book Electrospun Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to explore the history, fundamentals, manufacturing processes, optimization parameters, and applications of electrospun materials. The book includes various types of electrospun materials such as antimicrobial, smart, bioinspired systems. It focuses on the many application areas for electrospun materials such as energy storage and harvesting, catalysis, biomedical including gene delivery and tissue engineering, separation, adsorption and water treatment technologies, packaging. The book emphasizes the enhanced sustainable properties of electrospun materials, with the challenges and future developments being discussed in detail. The chapters are written by top-class researchers and experts from throughout the world.
Download or read book A Review of State Of The Art Separator Materials for Advanced Lithium Based Batteries for Future Aerospace Missions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2019-01-18 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: As NASA embarks on a renewed human presence in space, safe, human-rated, electrical energy storage and power generation technologies, which will be capable of demonstrating reliable performance in a variety of unique mission environments, will be required. To address the future performance and safety requirements for the energy storage technologies that will enhance and enable future NASA Constellation Program elements and other future aerospace missions, advanced rechargeable, lithium-ion battery technology development is being pursued with an emphasis on addressing performance technology gaps between state-of-the-art capabilities and critical future mission requirements. The material attributes and related performance of a lithium-ion cell's internal separator component are critical for achieving overall optimal performance, safety and reliability. This review provides an overview of the general types, material properties and the performance and safety characteristics of current separator materials employed in lithium-ion batteries, such as those materials that are being assessed and developed for future aerospace missions. Bladwin, Richard S. Glenn Research Center NASA/TM-2009-215590, E-16879
Download or read book Energy Sustainable Advanced Materials written by Mark Alston and published by Springer Nature. This book was released on 2021-03-16 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights progress towards the capture, storage, and utilization of energy through the development of advanced materials and systems based on abundant elements, materials, and commodities. Energy is critical to human sustainability and a global-scale deployment of renewable energy systems will be required. Hence, the chapters integrate the fundamental aspects that enable the technical advancements in detail, along with an emphasis on the need for highly sustainable materials to enable real impact for humankind: To determine innovation of energy capture and storage through characterizations of materials in areas of electrical generation and electrical storage systems; To demonstrate better performance, economic and environmental advantages than the current state of the art; To define new chemistries and materials for innovations in energy density design through lower operational temperatures, improve safety, expanding operational voltage, battery durability lifetimes, and reduce system costs. Advances critical technical and commercial objectives for novel high energy density materials; Evaluates operational material models for optimizing energy capture that are integrated by configurations as a system; Illustrates utilization of material life cycle assessment for high energy outputs generators for sustainable materials.
Download or read book Recommended Practice for Determining Material Properties of Li Battery Separator written by Battery Materials Testing Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE RP provides a set of test methods and practices for the characterization of the properties of Li-battery separator.The test methods in this RP have been grouped into one of three categories: 1Separator material parameters: Minimum set of separator properties to be measured. 2Chemistry/customer-specific parameters: Properties that are dependent on the application, customer needs and/or requirements, manufacturing process, etc. This RP will include the current best practice methodologies for these tests, with an understanding that the best practice methodologies are evolving as more information is learned. 3R&D parameters: Properties that are dependent on the application, customer needs and/or requirements, manufacturing process, etc. The methodologies in this third section are under development and have not yet achieved broad application.It is not within the scope of this document to establish criteria for the test results, as this is usually established between the materials supplier and seperator manufacturer and the user. This is especially true where this document specifies a range of target values, or an open testing parameter. In these cases, the sample supplier and recipient must agree to specific numbers for the test parameters. As the market for Li-battery continues to grow, due to the evolution of motive and stationary power applications, new separator concepts are being proposed for incorporation into the batteries, including solutions using a composite of different materials. Solutions include ceramic or high temperature polymer coatings for traditional separators, as well as other solutions incorporating high temperature fibers, high temperature polymers, or ceramic materials. The need for thermal stability is becoming important as the thickness of separators is reduced and the energy density of electrode materials increases. There are a variety of properties that should be measured and a variety of methodologies to perform testing. This Recommended Practice (RP) provides a set of test methods for the characterization of the Li-battery separator's properties, which, if used consistently across different materials, will facilitate the comparison of the properties of Li-battery separator.
Download or read book Aqueous Zinc Ion Batteries written by Haiyan Wang and published by John Wiley & Sons. This book was released on 2024-07-29 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aqueous Zinc Ion Batteries Pioneering reference book providing the latest developments and experimental results of aqueous zinc ion batteries Aqueous Zinc Ion Batteries comprehensively reviews latest advances in aqueous zinc ion batteries and clarifies the relationships between issues and solutions for the emerging battery technology. Starting with the history, the text covers essentials of each component of aqueous zinc ion batteries, including cathodes, anodes, and electrolytes, helping readers quickly attain a foundational understanding of the subject. Written by three highly qualified authors with significant experience in the field, Aqueous Zinc Ion Batteries provides in-depth coverage of sample topics such as: History, main challenges, and zinc metal anodes for aqueous zinc ion batteries Electrochemical reaction mechanism of aqueous zinc ion batteries and interfacial plating and stripping on zinc anodes Cathode materials for aqueous zinc ion batteries, covering manganese-based materials, vanadium-based materials, Prussian blue analogs, and other cathode materials Development of electrolytes, issues, and corresponding solutions for aqueous zinc ion batteries Separators for aqueous zinc ion batteries, development of full zinc ion batteries, and future perspectives on the technology A detailed resource on a promising alternative to current lithium-ion battery systems, Aqueous Zinc Ion Batteries is an essential read for materials scientists, electrochemists, inorganic chemists, surface chemists, catalytic chemists, and surface physicists who want to be on the cutting edge of a promising new type of battery technology.
Download or read book Nanocomposites Advanced Materials for Energy and Environmental Aspects written by Mohammad Ehtisham Khan and published by Elsevier. This book was released on 2023-01-25 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites-Advanced Materials for Energy and Environmental Aspects provides a brief introduction to metal oxides. The book then discusses novel fabrication methodologies and eco-friendly methods for using a broad range of metal oxide-based nanocomposites in innovative ways. Key aspects include fundamental characteristics of environmentally sustainable fabrication of materials for solar power, power generation and the textiles industries. Commercialization and economic aspects that are currently of major significance are also discussed in detail. The book represents an important information resource for material scientists and engineers to create the next generation of products and devices for energy and environmental applications. Metal and metal oxide-based nanocomposites are at the heart of some of the most exciting developments in the field of energy and environmental research. They have exceptional properties and are utilized in electronic and environmental sensing devices, for energy storage, electrode materials, fuel cells, membranes, and more. Covers fabrication, standard characterization and photocatalytic mechanism for a wide range of applications Includes broad ranging metal and metal oxide-based applications covering environmental, energy, electronics, oil, gas, water treatment and sensing Evaluates dye consumption in the textiles industries and the energy related research that will determine options for sustainable and transformational opportunities
Download or read book Batteries in a Portable World written by and published by . This book was released on 2016 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functional Polymers for Metal ion Batteries written by Shanqing Zhang and published by John Wiley & Sons. This book was released on 2023-01-12 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional Polymers for Metal-Ion Batteries Unique and useful book covering fundamental knowledge and practical applications of polymer materials in energy storage systems In Functional Polymers for Metal-Ion Batteries, the recent development and achievements of polymer-based materials are comprehensively analyzed in four directions, including electrode materials, binders, separators, and solid electrolytes, highlighting the working mechanisms, classification, design strategies, and practical applications of these polymer materials in mental-ion batteries. Specific sample topics covered in Functional Polymers for Metal-Ion Batteries include: Prominent advantages of various solid-state electrolytes, such as low flammability, easy processability, more tolerance to vibration, shock, and mechanical deformation Why and how functional polymers present opportunities to maximize energy density and pursue the sustainability of the battery industry How the application of functional polymers in metal-ion batteries helps enhance the high energy density of energy storage devices and reduce carbon footprint during production How development of functional separators could significantly lower the cost of battery manufacturing Providing a comprehensive understanding of the role of polymers in the whole configuration of metal-ion batteries from electrodes to electrolytes, Functional Polymers for Metal-Ion Batteries is an ideal resource for materials scientists, electrochemists, and polymer, solid state, and physical chemists who wish to understand the latest developments of this technology.
Download or read book Printed Batteries written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2018-04-23 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers the first comprehensive account of this interesting and growing research field Printed Batteries: Materials, Technologies and Applications reviews the current state of the art for printed batteries, discussing the different types and materials, and describing the printing techniques. It addresses the main applications that are being developed for printed batteries as well as the major advantages and remaining challenges that exist in this rapidly evolving area of research. It is the first book on printed batteries that seeks to promote a deeper understanding of this increasingly relevant research and application area. It is written in a way so as to interest and motivate readers to tackle the many challenges that lie ahead so that the entire research community can provide the world with a bright, innovative future in the area of printed batteries. Topics covered in Printed Batteries include, Printed Batteries: Definition, Types and Advantages; Printing Techniques for Batteries, Including 3D Printing; Inks Formulation and Properties for Printing Techniques; Rheological Properties for Electrode Slurry; Solid Polymer Electrolytes for Printed Batteries; Printed Battery Design; and Printed Battery Applications. Covers everything readers need to know about the materials and techniques required for printed batteries Informs on the applications for printed batteries and what the benefits are Discusses the challenges that lie ahead as innovators continue with their research Printed Batteries: Materials, Technologies and Applications is a unique and informative book that will appeal to academic researchers, industrial scientists, and engineers working in the areas of sensors, actuators, energy storage, and printed electronics.
Download or read book Nanostructured Materials for Energy Storage written by Kalim Deshmukh and published by John Wiley & Sons. This book was released on 2024-08-14 with total page 1981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference work for researchers and engineers working with advanced and emerging nanostructured battery and supercapacitor materials Lithium-ion batteries and supercapacitors play a vital role in the paradigm shift towards sustainable energy technology. This book reviews how and why different nanostructured materials improve the performance and stability of batteries and capacitors. Sample materials covered throughout the work include: Graphene, carbon nanotubes, and carbon nanofibers MXenes, hexagonal boron nitride, and transition metal dichalcogenides Transition metal oxides, metal-organic frameworks, and lithium titanates Gel polymer electrolytes, hydrogels, and conducting polymer nanocomposites For materials scientists, electrochemists, and solid state chemists, this book is an essential reference to understand the lithium-ion battery and supercapacitor applications of nanostructured materials that are most widely used for developing low-cost, rapid, and highly efficient energy storage systems.