Download or read book Advances in Materials and Processing Technologies II written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2011-06-30 with total page 2018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Conference on Advances in Materials and Processing Technologies (AMPT), 26-29 October, 2009

Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.

Download or read book Advances in Materials and Processing Technologies written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2009-12-21 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from International Conference on Advances in Materials and Processing Technologies (AMPT), 2-5 November, 2008

Download or read book Advanced Materials and Processing Technologies II written by Yuyuan Zhao and published by Trans Tech Publications Ltd. This book was released on 2020-03-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3rd International Conference on Materials Sciences and Nanomaterials (ICMSN 2019) and 3rd International Conference on Advanced Manufacturing and Materials (ICAMM 2019)

Download or read book Advanced Materials Processing and Testing Technology written by Dajing Fang and published by Trans Tech Publications Ltd. This book was released on 2019-08-02 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Advanced Materials, Processing and Testing Technology (AMPTT 2019) Selected, peer reviewed papers from the International Conference on Advanced Materials, Processing and Testing Technology (AMPTT 2019), May 17-18, 2019, Guangzhou, China

Download or read book Advances in Laser Materials Processing written by Jonathan R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing - Provides revised, expanded and updated coverage

Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.

Download or read book Advanced Manufacturing Techniques Using Laser Material Processing written by Akinlabi, Esther Titilayo and published by IGI Global. This book was released on 2016-04-14 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lasers in material processing has become a useful method for transforming industrial materials into finished products. The benefits of laser material processing are vast, including increased precision, high processing speed, and dustless cutting and drilling. Advanced Manufacturing Techniques Using Laser Material Processing explores the latest methodologies for using lasers in materials manufacturing and production, the benefits of using lasers in industrial settings, as well as future outlooks for this technology. This innovative publication is an essential reference source for professionals, researchers, and graduate-level students studying manufacturing technologies and industrial engineering.

Download or read book Advanced Materials Research written by Stanislav Kolisnychenko and published by Trans Tech Publications Ltd. This book was released on 2018-11-13 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only

Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study

Download or read book Trends in Advanced Materials and Processes written by Dragan P. Uskokovic and published by Trans Tech Publications Ltd. This book was released on 2000-08-13 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 3rd Yugoslav Materials Research Society Conference, Herceg-Novi, Yugoslavia, Sept. 20-24, 1999

Download or read book Advanced Materials written by Shun-Hsyung Chang and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.

Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.

Download or read book Commercialization of New Materials for a Global Economy written by National Research Council and published by National Academies Press. This book was released on 1993-02-01 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are important in the pursuit of virtually every human endeavor. Advances in materials are applied not only in advanced technological systems such as spacecraft, jet engines, computers, and telecommunications but also in a world of more familiar applications from automobiles to floor coverings to fishing rods. This book addresses the factors that impede the transition of new materials from concepts into commercial use. It identifies policies and actions that government and industry, together with universities, can take to remove these impediments. Incentives to accelerate the commercialization of advanced materials are suggested, and recommendations are presented on ways to stimulate competitive commercialization of materials by government, industry, and academia.

Download or read book Joining Processes for Dissimilar and Advanced Materials written by Pawan Kumar Rakesh and published by Woodhead Publishing. This book was released on 2021-11-13 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining Processes for Dissimilar and Advanced Materials describes how to overcome the many challenges involved in the joining of similar and dissimilar materials resulting from factors including different thermal coefficients and melting points. Traditional joining processes are ineffective with many newly developed materials. The ever-increasing industrial demands for production efficiency and high-performance materials are also pushing this technology forward. The resulting emergence of advanced micro- and nanoscale material joining technologies, have provided many solutions to these challenges. Drawing on the latest research, this book describes primary and secondary processes for the joining of advanced materials such as metals and alloys, intermetallics, ceramics, glasses, polymers, superalloys, electronic materials and composites in similar and dissimilar combinations. It also covers details of joint design, quality assurance, economics and service life of the product. - Provides valuable information on innovative joining technologies including induction heating of metals, ultrasonic heating, and laser heating at micro- and nanoscale levels - Describes the newly developed modelling, simulation and digitalization of the joining process - Includes a methodology for characterization of joints

Download or read book Materials Processing written by Lorraine F. Francis and published by Elsevier. This book was released on 2024-04-25 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing: A Unified Approach to Processing of Metals, Ceramics and Polymers, Second Edition is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. This fully updated edition includes expanded coverage on additive manufacturing, as well as adding a new section on machining. The organization has been modified and a greater emphasis has been placed on the fundamentals of processing and manufacturing methods. This book can be utilized by upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. - Includes comprehensive coverage on the fundamental concepts of materials processing - Provides coverage of metals, ceramics, and polymers in one text - Presents examples of both standard and newer additive manufacturing methods throughout - Gives students an overview on the methods that they will likely encounter in their careers

Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.