Download or read book Advanced Experimental Techniques in Powder Metallurgy written by Joel S. Hirschhorn and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of powder metallurgy techniques to make an almost infinite variety of materials and products places greater emphasis on utilization of sophisticated experimental techniques. Usually research and development efforts initiate the use of newly developed equipment and analytical procedures. Indeed, the contents of this book are strongly linked to research endeavors, in both the academic and industrials worlds. However, this volume can serve a much needed function in industrial applied powder metallurgy. Although many research ers will find the contents of great value, the technical personnel more involved with production, quality control, customer services and product design now have at their dispo sal a means to learn about the potential uses of several very important techniques. With today's "knowledge explosion" the present set of papers greatly facilitates the comprehension and adoption of new procedures. If powder metallurgy is to continue its rapid rate of growth in virtually all segments of industry, then the transition of modern equipment and procedures from tools of research and development laboratories to everyday plant operations and applications must be hastened. The editors hope that this volume aids in this process, as well as assisting students and researchers by providing a ready source of up-to-date useful information.

Download or read book Advanced Experimental Techniques in Powder Metallurgy written by Joel S. Hirschhorn and published by Springer. This book was released on 1995-12-31 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of powder metallurgy techniques to make an almost infinite variety of materials and products places greater emphasis on utilization of sophisticated experimental techniques. Usually research and development efforts initiate the use of newly developed equipment and analytical procedures. Indeed, the contents of this book are strongly linked to research endeavors, in both the academic and industrials worlds. However, this volume can serve a much needed function in industrial applied powder metallurgy. Although many research ers will find the contents of great value, the technical personnel more involved with production, quality control, customer services and product design now have at their dispo sal a means to learn about the potential uses of several very important techniques. With today's "knowledge explosion" the present set of papers greatly facilitates the comprehension and adoption of new procedures. If powder metallurgy is to continue its rapid rate of growth in virtually all segments of industry, then the transition of modern equipment and procedures from tools of research and development laboratories to everyday plant operations and applications must be hastened. The editors hope that this volume aids in this process, as well as assisting students and researchers by providing a ready source of up-to-date useful information.

Download or read book Perspectives in Powder Metallurgy Fundamentals Methods and Applications written by H. Hausner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy literature in the English language includes a large number of books and several thousand articles in various journals. The rate of growth of this literature increases from year to year. It covers well the whole field of powder metallurg- materials, processes and products - with two exceptions: friction and antifriction branches of powder metallurgy. This lack of information has nothing to do with scientific or technical considerations, and definitely has nothing to do with lack of initiative in the development of these materials. The industry concerned with the production of friction and antifriction materials is continually developing new products and techniques and produc tion is steadily growing. However, most companies working on these materials regard their experiences and new advancements as "proprietary" and, for competitive reasons, are not interested in publishing in the technical literature except for very perfunctory and usually highly commercial papers. Very little work on fric tion and antifriction materials is going on in independent labora tories and university laboratories, although fundamental studies in this field offer very interesting aspects.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sintering Key Papers written by S. Somiya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th International Symposium on the Science and Technology of Sintering was held on 4-6 November 1987 in Tokyo. Among the many technical sessions was one entitled 'Session for Sintering-Case Study'. Over 200 participants heard these invited talks. Although some papers were over 20 years old, it is necessary to understand the authors' way of thinking. Since the end of the Second World War, many excellent papers related to sintering have appeared in many different academic journals. Some of these papers are still of value, and are still being read by today's students. The questions we have to ask are: Why does the scholar think this way? Why did the scholar perform his experiments? What is the mechanism of sintering? What is the liquid phase of sintering? What is the behavior of sintering additives? What is the history and development of sintering theory? This book includes these sort of historical papers and also new original papers on sintering, all of which are very important to our understanding of the subject. Several papers have been added for this English edition, which is thus more comprehensive than its Japanese counterpart. These papers were spread out in many different sources and the benefits of collecting them together in book form is obvious.

Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts

Download or read book Sintering From Empirical Observations to Scientific Principles written by Randall German and published by Butterworth-Heinemann. This book was released on 2014-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: As sintering applications march toward a $30 billion global business, the models for sintering have progressed, but generally follow behind observation. Documentation of the steps needed to build to a quantitative and predictive theory are often missed. Sintering: From Empirical Observations to Scientific Principles partitions sintering applications and observations to show critical turning points required to establish modern sintering as a predictive science. This book, written by the most cited author in his field, is laced with people, organizations, critical steps, and important formulations in a mixture of history, personalities, and applications. Exploring how insights in seemingly unrelated fields sparked progress, it is also a teaching tool to show where there is success, where there are problems, and how to organize teams to leapfrog to new applications or plateaus of use. Randall German's Sintering: From Empirical Observations to Scientific Principles is a platform for directly addressing the critical control parameters in these new research and development efforts. - Shows how the theories and understanding of sintering were developed and improved over time, and how different products were developed, ultimately leading to important knowledge and lessons for solving real sintering problems - Covers all the necessary infrastructure of sintering theory and practice, such as atomic theory, surface energy, microstructure, and measurement and observation tools - Introduces the history and development of such early sintered products as porcelain, tungsten lamp filaments, bronze bearings, steel automotive components, platinum crucibles and more

Download or read book Liquid Phase Sintering written by R.M. German and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years there has been rapid growth in the activities involving particulate materials because of recognized advantages in manufacturing. This growth is attributed to several factors; i) an increased concern over energy utilization, ii) a desire to better control microstructure in engineermg materials, iii) the need for 1mproved material economy, iv) societal and economic pressures for higher productivity and quality, v) requirements for unique property combinations for high performance applica tions, and vi) a desire for net shape forming. Accordingly, liquid phase sintering has received increased attention as part of the growth in particulate materials processing. As a consequence, the commercial applications for liquid phase sintering are expanding rapidly. This active and expanding interest is not well served by available texts. For this reason I felt it was appropriate to write this book on liquid phase sintering. The technology of liquid phase sintering IS quite old and has been in use in the ceramics industry for many centuries. However, the general perception among materials and manufacturing engineers is that liquid phase sintering is still a novel technique. I believe the diverse technological appli cations outlined in this book will dispel I such impressions. Liquid phase. sintering has great value in fabricating several unique materials to near net shapes and will continue to expand in applications as the fundamental attrib utes are better appreciated. I am personally involved with several uses for liquid phase sintering.

Download or read book Advances in Materials Characterization II written by R. L. Snyder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the proceedings of the second inter disciplinary conference on materials characterization held from July 30 through August 3, 1984 at the New York State College of Ceramics at Alfred University. The conference was the 20th in the University Series on Ceramic Science, instituted in 1964 by Alfred University, the University of California at Berkeley, North Carolina State University and Notre Dame University. Volume I of the proceedings of the first conference using this interdisciplinary approach to materials characterization was published as "Advances in Materials Characterization", edited by D. R. Rossington, R. A. Condrate and R. L. Snyder, and was listed as volume 15 of the Materials Science Research series of Plenum Press (New York, 1983). The purpose of bringing together scientists from a wide range of disciplines to present and discuss the latest developments in their fields is to promote cross fertilization. The first conference of this type and its resulting volume of proceedings stimulated a significant dialogue between disciplines concerning the characterization of materials, therefore indicating a need for a continuing series of such conferences. Characterization lies at the core of materials science.

Download or read book Essential Readings in Light Metals Electrode Technology for Aluminum Production written by John A. Johnson and published by John Wiley & Sons. This book was released on 2013-04-03 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compilation is the most comprehensive historical collection of papers written on primary aluminum science and technology. It is a definitive reference in the field of aluminum production and related light metals technologies and contains a strong mix of materials science and practical, applied technology. Written for materials scientists and engineers, metallurgists, mechanical engineers, aerospace and automobile engineers, electrical and electronics engineers, this volume is a valuable resource for the global aluminum and light metals industries.

Download or read book Essential Readings in Light Metals Volume 4 Electrode Technology for Aluminum Production written by Alan Tomsett and published by Springer. This book was released on 2016-12-27 with total page 1212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compilation is the most comprehensive historical collection of papers written on primary aluminum science and technology. It is a definitive reference in the field of aluminum production and related light metals technologies and contains a strong mix of materials science and practical, applied technology. Written for materials scientists and engineers, metallurgists, mechanical engineers, aerospace and automobile engineers, electrical and electronics engineers, this volume is a valuable resource for the global aluminum and light metals industries.

Download or read book Computer Simulation in Physical Metallurgy written by Gianni Jacucci and published by Springer Science & Business Media. This book was released on 1986-03-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Porous Media Fluid Transport and Pore Structure written by F Dullien and published by Elsevier. This book was released on 2012-12-02 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous Media: Fluid Transport and Pore Structure presents relevant data on the role of pore structure in terms of transport phenomena in pore spaces. The information is then applied to the interpretation of various experiments and results of model calculations. This book emphasizes the discussion of ""flow through porous media"" in terms of interactions among the three main factors. These factors are transport phenomena, interfacial effects, and pore structure. An introductory chapter opens the text and presents some of the basic concepts and terms that will be encountered all throughout. Chapters 2 to 4 focus on the important foundations of the physical phenomena as applied in the pore space of porous media. These foundations are capillarity, pore structure, and single phase flow and diffusion. Chapters 5 to 7 discuss more in detail the different applications of pore structure to various operations and processes. Some of the concepts covered in this part of the book include flow and/or diffusion through a porous medium, simultaneous flow of immiscible fluids and immiscible displacement, and miscible displacement and hydrodynamic dispersion. This book is a good reference to students, scientists, and engineers in the field of chemistry, physics, and biology.

Download or read book Porous Media written by F. A.L. Dullien and published by Academic Press. This book was released on 2012-12-02 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the relationship between transport properties and pore structure of porous material. Models of pore structure are presented with a discussion of how such models can be used to predict the transport properties of porous media. Portions of the book are devoted to interpretations of experimental results in this area and directions for future research. Practical applications are given where applicable, and are expected to be useful for a large number of different fields, including reservoir engineering, geology, hydrogeology, soil science, chemical process engineering, biomedical engineering, fuel technology, hydrometallurgy, nuclear reactor technology, and materials science. - Presents mechanisms of immiscible and miscible displacement (hydrodynamic dispersion) process in porous media - Examines relationships between pore structure and fluid transport - Considers approaches to enhanced oil recovery - Explores network modeling and perolation theory

Download or read book Handbook Of Porous Materials Synthesis Properties Modeling And Key Applications In 4 Volumes written by and published by World Scientific. This book was released on 2020-10-20 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume handbook gives a state-of-the-art overview of porous materials, from synthesis and characterization and simulation all the way to manufacturing and industrial applications. The editors, coming from academia and industry, are known for their didactic skills as well as their technical expertise. Coordinating the efforts of 37 expert authors in 14 chapters, they construct the story of porous carbons, ceramics, zeolites and polymers from varied viewpoints: surface and colloidal science, materials science, chemical engineering, and energy engineering. Volumes 1 and 2 cover the fundamentals of preparation, characterisation, and simulation of porous materials. Working from the fundamentals all the way to the practicalities of industrial production processes, the subjects include hierarchical materials, in situ and operando characterisation using NMR, X-Ray scattering and tomography, state-of-the-art molecular simulations of adsorption and diffusion in crystalline nanoporous materials, as well as the emerging areas of bio-artificing and drug delivery. Volume 3 focuses on porous materials in industrial separation applications, including adsorption separation, membrane separation, and osmotic distillation. Finally, and highly relevant to tomorrow's energy challenges, Volume 4 explains the energy engineering aspects of applying porous materials in supercapacitors, fuel cells, batteries, electrolysers and sub-surface energy applications.The text contains many high-quality colourful illustrations and examples, as well as thousands of up-to-date references to peer-reviewed articles, reports and websites for further reading. This comprehensive and well-written handbook is a must-have reference for universities, research groups and companies working with porous materials.Related Link(s)

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques