Download or read book Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction written by Ki-Han Kim and published by Springer. This book was released on 2014-07-08 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It is divided into two parts. Part 1 consists of seven chapters, offering a wide range of computational and experimental approaches to cavitation erosion. It includes a general introduction to cavitation and cavitation erosion a detailed description of facilities and measurement techniques commonly used in cavitation erosion studies, an extensive presentation of various stages of cavitation damage (including incubation and mass loss) and insights into the contribution of computational methods to the analysis of both fluid and material behavior. The proposed approach is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. Part 2 is devoted to a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Grenoble, France, 1-2 March 2011) representing the forefront of research on cavitation erosion. Innovative numerical and experimental investigations illustrate the most advanced breakthroughs in cavitation erosion research.
Download or read book MARINE 2011 IV International Conference on Computational Methods in Marine Engineering written by Luís Eça and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers from the Fourth International Conference on Computational Methods in Marine Engineering, held at Instituto Superior Técnico, Technical University of Lisbon, Portugal in September 2011. Nowadays, computational methods are an essential tool of engineering, which includes a major field of interest in marine applications, such as the maritime and offshore industries and engineering challenges related to the marine environment and renewable energies. The 2011 Conference included 8 invited plenary lectures and 86 presentations distributed through 10 thematic sessions that covered many of the most relevant topics of marine engineering today. This book contains 16 selected papers from the Conference that cover “CFD for Offshore Applications”, “Fluid-Structure Interaction”, “Isogeometric Methods for Marine Engineering”, “Marine/Offshore Renewable Energy”, “Maneuvering and Seakeeping”, “Propulsion and Cavitation” and “Ship Hydrodynamics”. The papers were selected with the help of the recognized experts that collaborated in the organization of the thematic sessions of the Conference, which guarantees the high quality of the papers included in this book.
Download or read book Cavitation and Bubble Dynamics written by Phoevos Koukouvinis and published by Elsevier. This book was released on 2021-09-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation and Bubble Dynamics: Fundamentals and Applications examines the latest advances in the field of cavitation and multiphase flows, including associated effects such as material erosion and spray instabilities. This book tackles the challenges of cavitation hindrance in the industrial world, while also drawing on interdisciplinary research to inform academic audiences on the latest advances in the fundamentals. Contributions to the book come from a wide range of specialists in areas including fuel systems, hydropower, marine engineering, multiphase flows and computational fluid mechanics, allowing readers to discover novel interdisciplinary experimentation techniques and research results. This book will be an essential tool for industry professionals and researchers working on applications where cavitation hindrance affects reliability, noise, and vibrations. Covers a wide range of cavitation and bubble dynamics phenomena, including shock wave emission, jetting, and luminescence Provides the latest advice about applications including cavitation tunnels, cavitation testing, flow designs to avoid cavitation in pumps and other hydromachinery, and flow lines Describes novel experimental techniques, such as x-ray imaging and new computational techniques
Download or read book Advances in Energy Science and Equipment Engineering II Volume 2 written by Shiquan Zhou and published by CRC Press. This book was released on 2017-09-19 with total page 1379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 2nd International Conference on Energy Equipment Science and Engineering (ICEESE 2016) was held on November 12-14, 2016 in Guangzhou, China. ICEESE 2016 brought together innovative academics and industrial experts in the field of energy equipment science and engineering to a common forum. The primary goal of the conference is to promote research and developmental activities in energy equipment science and engineering and another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working all around the world. The conference will be held every year to make it an ideal platform for people to share views and experiences in energy equipment science and engineering and related areas. This second volume of the two-volume set of proceedings covers the field of Structural and Materials Sciences, and Computer Simulation & Computer and Electrical Engineering.
Download or read book Simulations and Optical Diagnostics for Internal Combustion Engines written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2019-10-11 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on combustion simulations and optical diagnostics techniques, which are currently used in internal combustion engines. The book covers a variety of simulation techniques, including in-cylinder combustion, numerical investigations of fuel spray, and effects of different fuels and engine technologies. The book includes chapters focused on alternative fuels such as DEE, biomass, alcohols, etc. It provides valuable information about alternative fuel utilization in IC engines. Use of combustion simulations and optical techniques in advanced techniques such as microwave-assisted plasma ignition, laser ignition, etc. are few other important aspects of this book. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Download or read book Constitutive Models for Rubber IX written by Bohdana Marvalova and published by CRC Press. This book was released on 2015-10-22 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of rubber make it ideal for use in a wide variety of engineering applications such as tyres, engine mounts, shock absorbers, flexible joints and seals. Developing diverse elastomeric elements for various structures involves numerical simulations of their performance, which are based on reliable constitutive models of the mater
Download or read book Technology and Science for the Ships of the Future written by E. Rizzuto and published by IOS Press. This book was released on 2022-09-29 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oceans are a key resource for transportation, energy and material extraction, and food production, representing one of the most important environments on the planet. Technological developments enabling us to exploit marine resources in a sustainable way are therefore of the greatest importance. This book presents the proceedings of the NAV 2022 conference, held in Genoa and La Spezia, Italy, from 15 to 17 June 2022. The conference is held every 3 years, attracting specialists in marine technology from all over the world. NAV 2022 was the 20th edition of the conference, and covered a full spectrum of maritime technology themes, all related to the exploitation of sea resources. The book contains 87 scientific papers, covering subjects ranging from comfort on board; to conceptual and practical ship design; deep sea mining and marine robotics; protection of the environment; renewable marine energy; design and engineering of offshore vessels; digitalization and cyber security; unmanned vehicles; yacht and pleasure craft design, and inland-waterway vessels. Providing a comprehensive coverage of the latest scientific and technical maritime issues, the book will be of interest to all those involved in this vital global industry.
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book IUTAM Symposium on Recent Advances in Moving Boundary Problems in Mechanics written by Stefanie Gutschmidt and published by Springer. This book was released on 2019-03-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many problems in mechanics involve deformable domains with moving boundaries, including fluid-structure interaction, multiphase flows, flows over soft tissues and textiles, or flows involving accretion/erosion to name but a few. The presence of a moving boundary presents considerable challenges when it comes to modelling and understanding the underlying system dynamics. This proceedings volume collects contributions made at the IUTAM Symposium on Recent Advances in Moving Boundary Problems in Mechanics held in Christchurch, New Zealand in February 2018.
Download or read book Processing Structure Property Relationships in Metals written by Alessandra Varone and published by MDPI. This book was released on 2019-11-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the industrial manufacturing of metals, the achievement of products featuring desired characteristics always requires the control of process parameters in order to obtain a suitable microstructure. The strict relationship among process parameters, microstructure, and mechanical properties is a matter of interest in different areas, such as foundry, plastic forming, sintering, welding, etc., and regards both well-established and innovative processes. Nowadays, circular economy and sustainable technological development are dominant paradigms and impose an optimized use of resources, a lower energetic impact of industrial processes and new tasks for materials and products. In this frame, this Special Issue covers a broad range of research works and contains research and review papers.
Download or read book Numerical Modelling and Prediction of Cavitation Erosion Using Euler Euler and Multi Scale Euler Lagrange Methods written by Andreas Peters and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Experimental Study of Cavitation Erosion Resistance of Concrete written by Futian Jiang and published by . This book was released on 1984 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAVITATION EROSION STATE OF ART AND PREDICTING CAPABILITY SUBMITTED FOR PUBLICATION APPLIED MECHANICS REVIEW ASME written by FREDERICK G. HAMMITT and published by . This book was released on 1979 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Cavitation written by Jean-Pierre Franc and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats cavitation, which is a unique phenomenon in the field of hyd- dynamics, although it can occur in any hydraulic machinery such as pumps, propellers, artificial hearts, and so forth. Cavitation is generated not only in water, but also in any kind of fluid, such as liquid hydrogen. The generation of cavitation can cause severe damage in hydraulic machinery. Therefore, the prevention of cavitation is an important concern for designers of hydraulic machinery. On the contrary, there is great potential to utilize cavitation in various important applications, such as environmental protection. There have been several books published on cavitation, including one by the same authors. This book differs from those previous ones, in that it is both more physical and more theoretical. Any theoretical explanation of the cavitation phenomenon is rather difficult, but the authors have succeeded in explaining it very well, and a reader can follow the equations easily. It is an advantage in reading this book to have some understanding of the physics of cavitation. Therefore, this book is not an introductory text, but a book for more advanced study. However, this does not mean that this book is too difficult for a beginner, because it explains the cavitation phenomenon using many figures. Therefore, even a beginner on cavitation can read and can understand what cavitation is. If the student studies through this book (with patience), he or she can become an expert on the physics of cavitation.
Download or read book Marine Propellers and Propulsion written by John Carlton and published by Butterworth-Heinemann. This book was released on 2018-11-30 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Propellers and Propulsion, Fourth Edition, offers comprehensive, cutting edge coverage to equip marine engineers, naval architects or anyone involved in propulsion and hydrodynamics with essential job knowledge. Propulsion technology is a complex, multidisciplinary topic with design, construction, operational and research implications. Drawing on experience from a long and varied career in consulting, research, design and technical investigation, John Carlton examines hydrodynamic theory, materials and mechanical considerations, and design, operation and performance. Connecting essential theory to practical problems in design, analysis and operational efficiency, the book is an invaluable resource, packed with hard-won insights, detailed specifications and data. Features comprehensive coverage of marine propellers, fully updated and revised, with new chapters on propulsion in ice and high speed propellers Includes enhanced content on full-scale trials, propeller materials, propeller blade vibration, operational problems and much more Synthesizes otherwise disparate material on the theory and practice of propulsion technology from the past 40 years’ development, including the latest developments in improving efficiency Written by a leading expert on propeller technology, essential for students, marine engineers and naval architects involved in propulsion and hydrodynamics
Download or read book A Vibratory approach to cavitation erosion prediction written by Francesc Xavier Escaler i Puigoriol and published by . This book was released on 2000 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: