Download or read book Advanced Energy Storage 2 Dimensional Nanomaterial Supercapacitor UTeM Press written by Mohd Asyadi Azam Mohd Abid and published by PENERBIT UTeM. This book was released on with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the overview and importance of the supercapacitor to the society as well as community. It expounds on the study's probable impact on education, science, technology, and ongoing research. It also gives the justification for the study in terms of contribution to theory and practice. This book may contribute to the novel scientific knowledge on 2D nanomaterial based electrodes for supercapacitor. The potential markets of this device include consumer electronics as well as hybrid electric vehicles. Lastly, it is hoped that this fundamental understanding of the intercalation of electrolyte ions to the 2D nanomaterial's surface would enhance the supercapacitor performances.
Download or read book Energy Applications of 2D Nanomaterials written by Ram K. Gupta and published by CRC Press. This book was released on 2022-05-26 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D nanomaterials have emerged as promising candidates for use in energy devices owing to their superior electrochemical properties, surface area, nanodevice integration, multifunctionality, printability, and mechanical flexibility. Energy Applications of 2D Nanomaterials covers a wide range of applications of 2D nanomaterials for energy, as well as future applications and challenges in fabricating flexible energy generation and storage devices. This book: Examines 2D nanomaterials for solar cells, fuel cells, batteries, supercapacitors, and flexible devices Details novel methods and advanced technologies Covers future applications and challenges This book is aimed at materials scientists, chemists, electrochemists, and engineers working in energy disciplines.
Download or read book Electrolytes for Electrochemical Supercapacitors written by Cheng Zhong and published by CRC Press. This book was released on 2016-04-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrolytes for Electrochemical Supercapacitors provides a state-of-the-art overview of the research and development of novel electrolytes and electrolyte configurations and systems to increase the energy density of electrochemical supercapacitors. Comprised of chapters written by leading international scientists active in supercapacitor research
Download or read book Energy Storage and Conversion Devices written by Anurag Gaur and published by CRC Press. This book was released on 2021-10-28 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art overview of the research and development in designing electrode and electrolyte materials for Li-ion batteries and supercapacitors. Further, green energy production via the water splitting approach by the hydroelectric cell is also explored. Features include: • Provides details on the latest trends in design and optimization of electrode and electrolyte materials with key focus on enhancement of energy storage and conversion device performance • Focuses on existing nanostructured electrodes and polymer electrolytes for device fabrication, as well as new promising research routes toward the development of new materials for improving device performance • Features a dedicated chapter that explores electricity generation by dissociating water through hydroelectric cells, which are a nontoxic and green source of energy production • Describes challenges and offers a vision for next-generation devices This book is beneficial for advanced students and professionals working in energy storage across the disciplines of physics, materials science, chemistry, and chemical engineering. It is also a valuable reference for manufacturers of electrode/electrolyte materials for energy storage devices and hydroelectric cells.
Download or read book Conducting Polymers for Advanced Energy Applications written by Ram K. Gupta and published by CRC Press. This book was released on 2021-12-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the use of conducting polymers and their composites in supercapacitors, batteries, photovoltaics, and fuel cells, nearly covering the entire spectrum of energy area under one title. Conducting Polymers for Advanced Energy Applications covers a range of advanced materials based on conducting polymers, the fundamentals, and the chemistry behind these materials for energy applications. FEATURES Covers materials, chemistry, various synthesis approaches, and the properties of conducting polymers and their composites Discusses commercialization and markets and elaborates on advanced applications Presents an overview and the advantages of using conducting polymers and their composites for advanced energy applications Describes a variety of nanocomposites, including metal oxides, chalcogenides, graphene, and materials beyond graphene Offers the fundamentals of electrochemical behavior This book provides a new direction for scientists, researchers, and students in materials science and polymer chemistry who seek to better understand the chemistry behind conducting polymers and improve their performance for use in advanced energy applications.
Download or read book Flexible Supercapacitor Nanoarchitectonics written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-06-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21 chapters in this book presents a comprehensive overview of flexible supercapacitors using engineering nanoarchitectures mediated by functional nanomaterials and polymers as electrodes, electrolytes, and separators, etc. for advanced energy applications. The various aspects of flexible supercapacitors, including capacitor electrochemistry, evaluating parameters, operating conditions, characterization techniques, different types of electrodes, electrolytes, and flexible substrates are covered. This is probably the first book of its type which systematically describes the recent developments and progress in flexible supercapacitor technology, and will be very helpful for generating new and innovative ideas in the field of energy storage material for wearable/flexible industry applications.
Download or read book Electrode Materials for Energy Storage and Conversion written by Mesfin A. Kebede and published by CRC Press. This book was released on 2021-11-17 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest developments and materials used in electrochemical energy storage and conversion devices, including lithium-ion batteries, sodium-ion batteries, zinc-ion batteries, supercapacitors and conversion materials for solar and fuel cells. Chapters introduce the technologies behind each material, in addition to the fundamental principles of the devices, and their wider impact and contribution to the field. This book will be an ideal reference for researchers and individuals working in industries based on energy storage and conversion technologies across physics, chemistry and engineering. FEATURES Edited by established authorities, with chapter contributions from subject-area specialists Provides a comprehensive review of the field Up to date with the latest developments and research Editors Dr. Mesfin A. Kebede obtained his PhD in Metallurgical Engineering from Inha University, South Korea. He is now a principal research scientist at Energy Centre of Council for Scientific and Industrial Research (CSIR), South Africa. He was previously an assistant professor in the Department of Applied Physics and Materials Science at Hawassa University, Ethiopia. His extensive research experience covers the use of electrode materials for energy storage and energy conversion. Prof. Fabian I. Ezema is a professor at the University of Nigeria, Nsukka. He obtained his PhD in Physics and Astronomy from University of Nigeria, Nsukka. His research focuses on several areas of materials science with an emphasis on energy applications, specifically electrode materials for energy conversion and storage.
Download or read book Smart and Flexible Energy Devices written by Ram K. Gupta and published by CRC Press. This book was released on 2022 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific community and industry have seen tremendous progress in efficient energy production and storage in the last few years. With the advancement in technology, new devices require high-performance, stretchable, bendable, and twistable energy sources, which can be integrated into next-generation wearable, compact, and portable electronics for medical, military, and civilian applications. Smart and Flexible Energy Devices examines the materials, basic working principles, and state-of-the-art progress of flexible devices like fuel cells, solar cells, batteries, and supercapacitors. Covering the synthesis approaches for advanced energy materials in flexible devices and fabrications and fundamental design concepts of flexible energy devices, such as fuel cells, solar cells, batteries, and supercapacitors, top author teams explore how newer materials with advanced properties are used to fabricate the energy devices to meet the future demand for flexible electronics. Additional features include: * Addressing the materials, technologies, and challenges of various flexible energy devices under one cover * Emphasizing the future demand and challenges of the field * Considering all flexible energy types, such as fuel cells, solar cells, batteries, and supercapacitors * Suitability for undergraduate and postgraduate students of material science and energy programs This is a valuable resource for academics and industry professionals working in the field of energy materials, nanotechnology, and energy devices.
Download or read book Supercapacitors written by Cindy D. Mullan and published by . This book was released on 2014-06-14 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Capacitors (ECs) are a class of energy storage device that fill the gap between high energy density batteries and high-power-density electrostatic capacitors. ECs show shorter charge/discharge time and higher power density compared to batteries. However, to use ECs as alternatives to batteries, a significant increase in energy density is required. Although critical to the U.S.'s energy future, development of ECs has been hindered by the lack of cost-effective electrode materials that can store more energy. As a cheaper alternative transition metal, manganese (Mn) is abundant and environmentally-friendly. Manganese oxide shows theoretical capacitance of ~ 800 F g-1, which is comparable to that of RuO2. However, owing to low electronic and ionic conductance, manganese oxide powder exhibits much lower specific capacitances. This book discusses studies of charge-storage mechanism of manganese oxide nanomaterials for ECs. It also discusses sustainable electrode materials made from electrospun alkali lignin-based carbon nanofibers for high performacen supercapacitors; new strategies for the improvement of SC energy density by covalent and non-covalent addition of qunones of carbon surfaces; maganese dioxide based SCs; supercapacitors test methods; and hydrogenated barium titanate films and their potential for integrated SCs.
Download or read book Energy Storage Devices written by M. Taha Demirkan and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.
Download or read book Microsupercapacitors written by Kazufumi Kobashi and published by Woodhead Publishing. This book was released on 2021-10-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsupercapacitors systematically guides the reader through the key materials, characterization techniques, performance factors and potential applications and benefits to society of this emerging electrical energy storage solution. The book reviews the technical challenges in scaling down supercapacitors, covering materials, performance, design and applications perspectives. Sections provide a fundamental understanding of microsupercapacitors and compare them to existing energy storage technologies. Final discussions consider the factors that impact performance, potential tactics to improve performance, barriers to implementation, emerging solutions to those barriers, and a future outlook. This book will be of particular interest to materials scientists and engineers working in academia, research and development. - Provides a concise introduction of the fundamental science, related technological challenges, and solutions that microsupercapacitors can offer - Compares microsupercapacitors with current technologies - Reviews the applications of new strategies and the challenge of scaling down supercapacitors - Covers the most relevant applications, including energy storage, energy harvesting, sensors and biomedical devices
Download or read book Functional Materials For Next generation Rechargeable Batteries written by Jiangfeng Ni and published by World Scientific. This book was released on 2021-02-10 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over-consumption of fossil fuels has caused deficiency of limited resources and environmental pollution. Hence, deployment and utilization of renewable energy become an urgent need. The development of next-generation rechargeable batteries that store more energy and last longer has been significantly driven by the utilization of renewable energy.This book starts with principles and fundamentals of lithium rechargeable batteries, followed by their designs and assembly. The book then focuses on the recent progress in the development of advanced functional materials, as both cathode and anode, for next-generation rechargeable batteries such as lithium-sulfur, sodium-ion, and zinc-ion batteries. One of the special features of this book is that both inorganic electrode materials and organic materials are included to meet the requirement of high energy density and high safety of future rechargeable batteries. In addition to traditional non-aqueous rechargeable batteries, detailed information and discussion on aqueous batteries and solid-state batteries are also provided.
Download or read book Supercapacitor Technology written by Inamuddin and published by Materials Research Forum LLC. This book was released on 2019-11-25 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercapacitors are most interesting in the area of rechargeable battery based energy storage because they offer an unbeatable power density, quick charge/discharge rates and prolonged lifetimes in comparison to batteries. The book covers inorganic, organic and gel-polymer electrolytes, electrodes and separators used in different types of supercapacitors; with emphasis on material synthesis, characterization, fundamental electrochemical properties and most promising applications. Keywords: Supercapacitors, Rechargeable Batteries, Organic Electrolytes, Inorganic Electrolytes, Gel Polymer based Supercapacitors, Redox Electrolytes, Starch-Based Electrolytes, Flexible Supercapacitors, Pseudocapacitors, Carbon Nanoarchitectures for Supercapacitors, Photo-Supercapacitors, Bimetal Oxides/Sulfides for Electrochemical Supercapacitors.
Download or read book Energy from Waste written by Ram K. Gupta and published by CRC Press. This book was released on 2022-03-28 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion of waste into value-added products such as energy transforms a potential environmental problem into a sustainable solution. Energy from Waste: Production and Storage focuses on the conversion of waste from various sources for use in energy production and storage applications. It provides the state-of-the-art in developing advanced materials and chemicals for energy applications using wastes and discusses the various treatment processes and technologies. Covers synthesis of usable materials from various types of waste and their application in energy production and storage Presents an overview and applications of wastes for green energy production and storage Provides fundamentals of electrochemical behavior and understanding of energy devices such as fuel cells, batteries, supercapacitors, and solar cells Elaborates on advanced technologies used to convert waste into green biochemical energy This work provides new direction to scientists, researchers, and students in materials and chemical engineering and related subjects seeking to sustainable solutions to energy production and waste management.
Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.
Download or read book 2D Nanomaterials for Energy Applications written by Spyridon Zafeiratos and published by Elsevier. This book was released on 2019-11-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Nanomaterials for Energy Applications: Graphene and Beyond discusses the current state-of-the art of 2D nanomaterials used in energy-related applications. Sections cover nanogenerators, hydrogen storage and theoretical design. Each chapter focuses on a different energy application, thus allowing readers to gain a greater understanding of the most promising 2D materials in the field. The book's ultimate goal lies in describing how each energy technology is beneficial, hence it provides a valuable reference source for materials scientists and engineers. The physical and chemical properties of 2D materials can be effectively tuned through different strategies, such as controlling dimensions, the crystallographic structure and defects, or doping with heteroatoms. This flexibility facilitates the design of 2D materials for dedicated applications in the field of energy conversion and storage. - Offers a single source for the major practical applications of 2D materials in the field of energy conversion and storage - Explores how 2D materials are being used to create new, more efficient industrial energy products and devices - Compares a variety of 2D materials, showing how the properties of a range of these materials make them beneficial for specific energy applications
Download or read book Handbook of Nanomaterials for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2018-07-19 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanomaterials for Industrial Applications explores the use of novel nanomaterials in the industrial arena. The book covers nanomaterials and the techniques that can play vital roles in many industrial procedures, such as increasing sensitivity, magnifying precision and improving production limits. In addition, the book stresses that these approaches tend to provide green, sustainable solutions for industrial developments. Finally, the legal, economical and toxicity aspects of nanomaterials are covered in detail, making this is a comprehensive, important resource for anyone wanting to learn more about how nanomaterials are changing the way we create products in modern industry. - Demonstrates how cutting-edge developments in nanomaterials translate into real-world innovations in a range of industry sectors - Explores how using nanomaterials can help engineers to create innovative consumer products - Discusses the legal, economical and toxicity issues arising from the industrial applications of nanomaterials
