Download or read book Advanced Energy Design Guide for Small to Medium Office Buildings written by and published by American Society of Heating Refrigerating and Air-Conditioning Engineers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Energy Design Guide for Small to Medium Office Buildings is the first in a series designed to provide recommendations for achieving 50% energy savings over the minimum code requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004. The energy savings target of 50% is the next step toward achieving a net zero energy building, which is defined as a building that, on an annual basis, draws from outside resources equal or less energy than it provides using on-site renewable energy sources. ANSI/ASHRAE/IESNA Standard 90.1-2004 provides the fixed reference point and serves as a consistent baseline and scale for all of the 50% Advanced Energy Design Guides. This Guide focuses on small to medium office buildings up to 100,000 ft2. Office buildings include a wide range of office types and related activities such as administrative, professional, government, bank or other financial services, and medical offices without medical diagnostic equipment. These facilities typically include all or some of the following space types: open plan and private offices, conference and meeting spaces, corridors and transition areas, lounge and recreation areas, lobbies, active storage areas, restrooms, mechanical and electrical rooms, stairways, and other spaces. This Guide does not cover specialty spaces such as data centers, which are more typical in large office buildings. The specific energy-saving recommendations in this Guide are summarized in a single table for each climate zone and will allow contractors, consulting engineers, architects, and designers to easily achieve advanced levels of energy savings without detailed energy modeling or analyses. In addition, this Guide provides a greater emphasis on integrated design as a necessary component in achieving 50% energy savings and devotes an entire chapter to integrated design strategies that can be used by teams who do not wish to follow the specific energy saving recommendations.
Download or read book Advanced Energy Design Guide for Small to Medium Office Buildings written by ASHRAE (Firm) and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides recommendations for achieving a net zero energy small or medium office building; allows contractors, consulting engineers, architects, and designers to easily achieve advanced levels of energy savings without resorting to detailed calculations or analyses"--
Download or read book Advanced Energy Design Guide for Small Office Buildings written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by American Society of Heating Refrigerating and Air-Conditioning Engineers. This book was released on 2004 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Achieving 30% energy savings over ANSI/ASHRAE/IESNA standard 90.1-1999."
Download or read book Advanced Energy Design Guide for Small to Medium Office Buildings written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Achieving 50 Energy Savings in Office Buildings Advanced Energy Design Guides written by and published by . This book was released on 2014 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fact sheet summarizes recommendations for designing new office buildings that result in 50% less energy use than conventional designs meeting minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for Small to Medium Office Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use office buildings with gross floor areas up to 100,000 ft2 (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller office buildings with insufficient budgets to fully implement best practices for integrated design and optimized performance. The recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of office buildings.
Download or read book Technical Support Document written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner organizations in eight months. This TSD describes the charge given to the committee in developing the office guide and outlines the schedule of the development effort. The project committee developed two prototype office buildings (5,000 ft2 frame building and 20,000 ft2 two-story mass building) to represent the class of small office buildings and performed an energy simulation scoping study to determine the preliminary levels of efficiency necessary to meet the energy savings target. The simulation approach used by the project committee is documented in this TSD along with the characteristics of the prototype buildings. The prototype buildings were simulated in the same climate zones used by the prevailing energy codes and standards to evaluate energy savings. Prescriptive packages of recommendations presented in the guide by climate zone include enhanced envelope technologies, lighting and day lighting technologies and HVAC and SWH technologies. The report also documents the modeling assumptions used in the simulations for both the baseline and advanced buildings. Final efficiency recommendations for each climate zone are included, along with the results of the energy simulations indicating an average energy savings over all buildings and climates of approximately 38%.
Download or read book Technical Support Document written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Energy Design Guide for Small Retail Buildings (AEDG-SR) was developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the Department of Energy (DOE). The guide is intended to offer recommendations to achieve 30% energy savings and thus to encourage steady progress towards net-zero energy buildings. The baseline level energy use was set at buildings built at the turn of the millennium, which are assumed to be based on ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings (refer to as the?Standard? in this report). ASHRAE and its partners are engaged in the development of a series of guides for small commercial buildings, with the AEDG-SR being the second in the series. Previously the partnership developed the Advanced Energy Design Guide for Small Office Buildings: Achieving 30% Energy Savings Over ANSI/ASHRAE/IESNA Standard 90.1-1999, which was published in late 2004. The technical support document prepared by PNNL details how the energy analysis performed in support of the Guide and documents development of recommendation criteria.
Download or read book Achieving 50 Energy Savings in Office Buildings Advanced Energy Design Guides Office Buildings Brochure written by and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fact sheet summarizes recommendations for designing new office buildings that result in 50% less energy use than conventional designs meeting minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for Small to Medium Office Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use office buildings withgross floor areas up to 100,000 ft2 (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller office buildings with insufficient budgets to fully implement best practices for integrated design and optimized performance. The recommendations have undergone a thorough analysis and reviewprocess through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of office buildings.
Download or read book Advanced Energy Design Guide for Small Warehouses and Self storage Buildings written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by Amer Society of Heating. This book was released on 2008-01-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fourth in series that provides recommendations for achieving 30% energy savings over minimum requirements of ANSI/ASHRAE/IESNA Standard 90.1-1999 for warehouses up to 50,000 ft2 and self-storage buildings using heating and AC equipment. Helps achieve advanced energy savings without detailed calculations or analyses. Includes recommendations for all 8 US climate zones"--Provided by publisher.
Download or read book Advanced Energy Design Guide for Small Retail Buildings written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by Amer Society of Heating. This book was released on 2006-01-01 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Second in series that provides recommendations for achieving 30% energy savings over minimum code requirements of ANSI/ASHRAE/IESNA Standard 90.1-1999. Focuses on small retail buildings up to 20,000 sq. ft. Recommendations for the 8 US Climate Zones allow owners/designers to achieve advanced levels of savings without resorting to calculations or analysis"--Provided by publisher.
Download or read book Advanced Energy Design Guide for K 12 School Buildings written by and published by American Society of Heating Refrigerating and Air-Conditioning Engineers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Energy Design Guide for K-12 School Buildings is the second in a series designed to provide recommendations for achieving 50% energy savings over the minimum code requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004. The energy savings target of 50% is the next step toward achieving a net zero energy building, which is defined as a building that, on an annual basis, draws from outside resources equal or less energy than it provides using on-site renewable energy sources. ANSI/ASHRAE/IESNA Standard 90.1-2004 provides the fixed reference point and serves as a consistent baseline and scale for all of the 50% Advanced Energy Design Guides. This Guide focuses on K-12 school buildings and applies to all sizes and classifications (elementary, middle, high). Space types covered include administrative and office, classrooms, hallways, restrooms, gymnasiums, assembly, libraries, food preparation and dining areas. This Guide does not cover atypical spaces such as indoor swimming pools, wet labs, or dirty dry labs. The specific energy-saving recommendations are summarized in a single table for each climate zone and will allow contractors, consulting engineers, architects, and designers to easily achieve advanced levels of energy savings without detailed energy modeling or analyses. In addition, this Guide provides information on integrated design, including best practices, as a necessary component in achieving 50% energy including integrated-design best practices. A chapter on benchmarking and EUI energy targets can be used by teams who do not wish to follow the specific energy-saving recommendations. Those looking for help in implementing the climate-specific recommendations of this guide will find an expanded section of tips and approaches in the How to Implement Recommendations chapter. These tips are cross-referenced with the recommendation tables. This chapter also includes additional recommendations that identify opportunities to incorporate greater energy savings into the design of the building. Case studies and technical examples throughout the guide illustrate the recommendations and demonstrate the technologies in real-world applications.
Download or read book Technical Support Document written by and published by . This book was released on 2013 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.
Download or read book Advanced Energy Design Guide for K 12 School Buildings written by ASHRAE (Firm) and published by . This book was released on 2018 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides recommendations for achieving a net zero energy K-12 school building; allows contractors, consulting engineers, architects, and designers to easily achieve advanced levels of energy savings without resorting to detailed calculations or analyses"--
Download or read book Advanced Energy Design Guide for Multifamily Buildings written by ASHRAE (Firm) and published by . This book was released on 2022 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides recommendations for achieving a net zero energy multifamily building; allows contractors, consulting engineers, architects, and designers to easily achieve advanced levels of energy savings without resorting to detailed calculations or analyses"--
Download or read book Advanced Energy Design Guide for K 12 School Buildings AEDG Training Cooperative Research and Development Final Report CRADA Number CRD 18 00761 written by and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Building Technologies Office (BTO), Commercial Buildings Integration (CBI) Program supports the adoption of zero energy ready buildings design practices through targeted Science, Technology, Engineering, and Mathematics (STEM) workforce development. The National Renewable Energy Laboratory (NREL) identified the opportunity to provided targeted training to those professionals that have the greatest potential to impact adoption and successful design outcomes of zero energy ready buildings projects. In January 2018, ASHRAE released Achieving Zero Energy: Advanced Energy Design Guide for K-12 School Buildings (AEDG). The AEDG was developed in collaboration with NREL, American Institute of Architects (AIA), American Society of Heating, Refrigeration and Air-conditioning Engineers (ASHRAE), U.S. Green Building Council (USGBC), and Illuminating Engineers Society (IES). The purpose of this CRADA was to create a partnership between NREL, AIA, ASHRAE, USGBC, and IES to create and host on-demand, web-based training based on the AEDG.
Download or read book Development of the Advanced Energy Design Guide for K 12 Schools 50 Energy Savings written by and published by . This book was released on 2013 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-K12) (ASHRAE et al. 2011a). The AEDG-K12 provides recommendations for achieving 50% whole-building energy savings in K-12 schools over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-K12 was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE).
Download or read book 50 Advanced Energy Design Guides written by and published by . This book was released on 2012 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents the process, methodology, and assumptions for the development of the 50% Energy Savings Advanced Energy Design Guides (AEDGs), a design guidance document that provides specific recommendations for achieving 50% energy savings above the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 in four building types: 1. Small to medium office buildings, 2. K-12 school buildings, 3. Medium to big box retail buildings, 4. Large hospital buildings.
