Download or read book Advanced Control and Supervision of Mineral Processing Plants written by Daniel Sbárbaro and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control and Supervision of Mineral Processing Plants describes the use of dynamic models of mineral processing equipment in the design of control, data reconciliation and soft-sensing schemes; through examples, it illustrates tools integrating simulation and control system design for comminuting circuits and flotation columns. Coverage is given to the design of soft sensors based on either single-point measurements or more complex measurements like images. Issues concerning data reconciliation and its employment in the creation of instrument architecture and fault diagnosis are surveyed. In consideration of the widespread use of distributed control and information management systems in mineral processing, the book describes the platforms and toolkits available for implementing such systems. Applications of the techniques described in real plants are used to highlight their benefits; information for all of the examples, together with supporting MATLAB® code can be found at www.springer.com/978-1-84996-105-9.

Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery has been the definitive reference for the mineral processing industry for over thirty years. This industry standard reference provides practicing engineers and students of mineral processing, metallurgy, and mining with practical information on all the common techniques used in modern processing installations. Each chapter is dedicated to a major processing procedure—from underlying principles and technologies to the latest developments in strategies and equipment for processing increasingly complex refractory ores. The eighth edition of this classic reference enhances coverage of practical applications via the inclusion of new material focused on meeting the pressing demand for ever greater operational efficiency, while addressing the pivotal challenges of waste disposal and environmental remediation. Advances in automated mineralogy and analysis and high-pressure grinding rolls are given dedicated coverage. The new edition also contains more detailed discussions of comminution efficiency, classification, modeling, flocculation, reagents, liquid-solid separations, and beneficiation of phosphate, and industrial materials. Finally, the addition of new examples and solved problems further facilitates the book’s pedagogical role in the classroom. Connects fundamentals with practical applications to benefit students and practitioners alike Ensures relevance internationally with new material and updates from renowned authorities in the UK, Australia, and Canada Introduces the latest technologies and incorporates environmental issues to place the subject of mineral processing in a contemporary context, addressing concerns of sustainability and cost effectiveness Provides new case studies, examples, and figures to bring a fresh perspective to the field

Download or read book Energy Efficiency in the Minerals Industry written by Kwame Awuah-Offei and published by Springer. This book was released on 2017-10-31 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art analysis of energy efficiency as applied to mining processes. From ground fragmentation to mineral processing and extractive metallurgy, experts discuss the current state of knowledge and the nagging questions that call for further research. It offers an excellent resource for all mine managers and engineers who want to improve energy efficiency to boost both production efficiency and sustainability. It will also benefit graduate students and experienced researchers looking for a comprehensive review of the current state of knowledge concerning energy efficiency in the minerals industry.

Download or read book SME Mineral Processing and Extractive Metallurgy Handbook written by Courtney A. Young and published by Society for Mining, Metallurgy & Exploration. This book was released on 2019-02-01 with total page 2258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark publication distills the body of knowledge that characterizes mineral processing and extractive metallurgy as disciplinary fields. It will inspire and inform current and future generations of minerals and metallurgy professionals. Mineral processing and extractive metallurgy are atypical disciplines, requiring a combination of knowledge, experience, and art. Investing in this trove of valuable information is a must for all those involved in the industry—students, engineers, mill managers, and operators. More than 192 internationally recognized experts have contributed to the handbook’s 128 thought-provoking chapters that examine nearly every aspect of mineral processing and extractive metallurgy. This inclusive reference addresses the magnitude of traditional industry topics and also addresses the new technologies and important cultural and social issues that are important today. Contents Mineral Characterization and AnalysisManagement and ReportingComminutionClassification and WashingTransport and StoragePhysical SeparationsFlotationSolid and Liquid SeparationDisposalHydrometallurgyPyrometallurgyProcessing of Selected Metals, Minerals, and Materials

Download or read book Control of Integral Processes with Dead Time written by Antonio Visioli and published by Springer Science & Business Media. This book was released on 2010-11-18 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Integral Processes with Dead Time provides a unified and coherent review of the various approaches devised for the control of integral processes, addressing the problem from different standpoints. In particular, the book treats the following topics: How to tune a PID controller and assess its performance; How to design a two-degree-of-freedom control scheme in order to deal with both the set-point following and load disturbance rejection tasks; How to modify the basic Smith predictor control scheme in order to cope with the presence of an integrator in the process; and how to address the presence of large process dead times. The methods are presented sequentially, highlighting the evolution of their rationale and implementation and thus clearly characterising them from both academic and industrial perspectives.

Download or read book Industrial Process Identification and Control Design written by Tao Liu and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice. The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes. Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realized using iterative learning control in uncertain industrial batch processes. All the proposed methods are presented in an easy-to-follow style, illustrated by examples and practical applications. This book will be valuable for researchers in system identification and control theory, and will also be of interest to graduate control students from process, chemical, and electrical engineering backgrounds and to practising control engineers in the process industry.

Download or read book The Engineering Science of Mineral Processing written by Fernando Concha A and published by CRC Press. This book was released on 2024-04-29 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering Science of Mineral Processing: A Fundamental and Practical Approach emphasizes the fundamentals of mineral processing to provide readers with a deep understanding of the science and phenomena that occur during the processing of ores. It also offers guidance on contemporary process implementation through practical industry applications. It includes examples of dynamic simulations and practical execution of advanced software to guide operating plans to ensure optimal conditions that predict process constraints. Focuses on the science of mineral processing, including particulate systems, hydrodynamics, and physical chemistry Discusses modeling, rheology, comminution, classification, flotation, and solid-liquid separation Includes practical examples from real-world industrial applications Provides information on dynamic process simulations and the application of digital twins in mineral processing plants to improve management and efficiency Details the future of mineral processing in the digital era. Offering a balance between fundamentals and applications, this book will be of interest to researchers and industry professionals working to optimize mining, mineral and chemical processing plants. It will also be of value to advanced students taking mineral processing and chemical engineering courses.

Download or read book Tandem Cold Metal Rolling Mill Control written by John Pittner and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a novel and practical advanced method for control of tandem cold metal rolling processes based on the emerging state-dependent Riccati equation technique. After a short history of tandem cold rolling, various types of cold rolling processes are described. A basic mathematical model of the process is discussed, and the diverse conventional control methods are compared. A detailed treatment of the theoretical and practical aspects of the state-dependent algebraic Riccati equation technique is given, with specific details of the new procedure described and results of simulations performed to verify the control model and overall system performance with the new controller coupled to the process model included. These results and data derived from actual operating mills are compared showing the improvements in performance using the new method. Material is included which shows how the new technique can be extended to the control of a broad range of large-scale complex nonlinear processes.

Download or read book Detection and Diagnosis of Stiction in Control Loops written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2009-10-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the process industries, stiction is the most common performance-limiting valve problem and over the last decade numerous different techniques for overcoming it have been proposed. This book represents a comprehensive presentation of these methods, including their principles, assumptions, strengths and drawbacks. Guidelines and working procedures are provided for the implementation of each method and MATLAB®-based software can be downloaded from www.ualberta.ca/~bhuang/stiction-book enabling readers to apply the methods to their own data. Methods for the limitation of stiction effects are proposed within the general context of: oscillation detection in control loops, stiction detection, diagnosis and stiction quantification and diagnosis of multiple faults. The state-of-the-art algorithms presented in this book are demonstrated and compared in industrial case studies of diverse origin – chemicals, building, mining, pulp and paper, mineral and metal processing.

Download or read book Control and Monitoring of Chemical Batch Reactors written by Fabrizio Caccavale and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemical Batch Reactor is aimed at tackling the above problems from a blending of academic and industrial perspectives. Advanced solutions (i.e., those based on recent research results) to the four fundamental problems of modeling, identification, control and fault diagnosis for batch processes are developed in detail in four distinct chapters. In each chapter, a general overview of foundational concepts is also given, together with a review of recent and classical literature on the various subjects. To provide a unitary treatment of the different topics and give a firm link to the underlying practical applications, a single case study is developed as the book progresses; a batch process of industrial interest, i.e., the phenol-formaldehyde reaction for the production of phenolic resins, is adopted to test the various techniques developed. In this way, a roadmap of the solutions to fundamental problems, ranging from the early stages of the production process to the complete design of control and diagnosis systems, is provided for both industrial practitioners and academic researchers.

Download or read book Networked and Distributed Predictive Control written by Panagiotis D. Christofides and published by Springer Science & Business Media. This book was released on 2011-04-07 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked and Distributed Predictive Control presents rigorous, yet practical, methods for the design of networked and distributed predictive control systems – the first book to do so. The design of model predictive control systems using Lyapunov-based techniques accounting for the influence of asynchronous and delayed measurements is followed by a treatment of networked control architecture development. This shows how networked control can augment dedicated control systems in a natural way and takes advantage of additional, potentially asynchronous and delayed measurements to maintain closed loop stability and significantly to improve closed-loop performance. The text then shifts focus to the design of distributed predictive control systems that cooperate efficiently in computing optimal manipulated input trajectories that achieve desired stability, performance and robustness specifications but spend a fraction of the time required by centralized control systems. Key features of this book include: • new techniques for networked and distributed control system design; • insight into issues associated with networked and distributed predictive control and their solution; • detailed appraisal of industrial relevance using computer simulation of nonlinear chemical process networks and wind- and solar-energy-generation systems; and • integrated exposition of novel research topics and rich resource of references to significant recent work. A full understanding of Networked and Distributed Predictive Control requires a basic knowledge of differential equations, linear and nonlinear control theory and optimization methods and the book is intended for academic researchers and graduate students studying control and for process control engineers. The constant attention to practical matters associated with implementation of the theory discussed will help each of these groups understand the application of the book’s methods in greater depth.

Download or read book Reset Control Systems written by Alfonso Baños and published by Springer Science & Business Media. This book was released on 2011-10-14 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reset Control Systems addresses the analysis for reset control treating both its basic form, and some useful variations of the reset action and reset condition. The issues regarding reset control – concepts and motivation; analysis tools; and the application of design methodologies to real-world examples – are given thorough coverage. The text opens with a historical perspective which moves from the seminal work of the Clegg integrator and Horowitz FORE to more recent approaches based on impulsive/hybrid control systems and explains the motivation for reset compensation. Preliminary material is also included. The focus then turns to stability analysis for systems using techniques which account for various time- and frequency-domain criteria. The final section of the book is centered on control systems design and application. The PI+CI compensator is detailed as are a proposed frequency domain approach using quantitative feedback theory and ideas for design improvement. Design examples are given.

Download or read book Internet based Control Systems written by Shuang-Hua Yang and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.

Download or read book Drives and Control for Industrial Automation written by Kok Kiong Tan and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drives and Control for Industrial Automation presents the material necessary for an understanding of servo control in automation. Beginning with a macroscopic view of its subject, treating drives and control as parts of a single system, the book then pursues a detailed discussion of the major components of servo control: sensors, controllers and actuators. Throughout, the mechatronic approach – a synergistic integration of the components – is maintained, in keeping with current practice. The authors’ holistic approach does not preclude the reader from learning in a step-by-step fashion – each chapter contains material that can be studied separately without compromising understanding. Drives are described in several chapters according to the way they are usually classified in industry, each comprised of its actuators and sensors. The controller is discussed alongside. Topics of recent and current interest – piezoelectricity, digital communications and future trends – are detailed in their own chapters.

Download or read book Control of Solar Energy Systems written by Eduardo F. Camacho and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Solar Energy Systems details the main solar energy systems, problems involved with their control, and how control systems can help in increasing their efficiency. Thermal energy systems are explored in depth, as are photovoltaic generation and other solar energy applications such as solar furnaces and solar refrigeration systems. This second and updated edition of Advanced Control of Solar Plants includes new material on: solar towers and solar tracking; heliostat calibration, characterization and offset correction; solar radiation, estimation, prediction, and computation; and integrated control of solar plants. This new edition contains worked examples in the text as well as proposed exercises and simulation models and so will be of great use to the student and academic, as well as the industrial practitioner.

Download or read book Extremum Seeking Control and Applications written by Chunlei Zhang and published by Springer Science & Business Media. This book was released on 2011-10-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extremum-seeking control tracks a varying maximum or minimum in a performance function such as output or cost. It attempts to determine the optimal performance of a control system as it operates, thereby reducing downtime and the need for system analysis. Extremum-seeking Control and Applications is divided into two parts. In the first, the authors review existing analog-optimization-based extremum-seeking control including gradient-, perturbation- and sliding-mode-based control designs. They then propose a novel numerical-optimization-based extremum-seeking control based on optimization algorithms and state regulation. This control design is developed for simple linear time-invariant systems and then extended for a class of feedback linearizable nonlinear systems. The two main optimization algorithms – line search and trust region methods – are analyzed for robustness. Finite-time and asymptotic state regulators are put forward for linear and nonlinear systems respectively. Further design flexibility is achieved using the robustness results of the optimization algorithms and the asymptotic state regulator by which existing nonlinear adaptive control techniques can be introduced for robust design. The approach used is easier to implement and tends to be more robust than those that use perturbation-based extremum-seeking control. The second part of the book deals with a variety of applications of extremum-seeking control: a comparative study of extremum-seeking control schemes in antilock braking system design; source seeking, formation control, collision and obstacle avoidance for groups of autonomous agents; mobile radar networks; and impedance matching. MATLAB®/Simulink® code which can be downloaded from www.springer.com/ISBN helps readers to reproduce the results presented in the text and gives them a head start for implementing the algorithms in their own applications. Extremum-seeking Control and Applications will interest academics and graduate students working in control, and industrial practitioners from a variety of backgrounds: systems, automotive, aerospace, communications, semiconductor and chemical engineering.

Download or read book Model Predictive Control of Wastewater Systems written by Carlos Ocampo-Martinez and published by Springer Science & Business Media. This book was released on 2010-10-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ..., new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The water and wastewater industry has undergone many changes in recent years. Of particular importance has been a renewed emphasis on improving resource management with tighter regulatory controls setting new targets on pricing, industry efficiency and loss reduction for both water and wastewater with more stringent environmental discharge conditions for wastewater. Meantime, the demand for water and wastewater services grows as the population increases and wishes for improved living conditions involving, among other items, domestic appliances that use water. Consequently, the installed infrastructure of the industry has to be continuously upgraded and extended, and employed more effectively to accommodate the new demands, both in throughput and in meeting the new regulatory conditions. Investment in fixed infrastructure is capital-intensive and slow to come on-stream. One outcome of these changes and demands is that the industry is examining the potential benefits of, and in many cases using, more advanced control systems.