Download or read book Adsorption of Antimony on the Au 111 Surface and Initial Oxidation of Antimony written by Penghui Ma and published by . This book was released on 1994 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Radiation induced Preparation of Antimony from Solutions of Antimony III Chloride in Organic Liquids written by Warren H. Philipp and published by . This book was released on 1971 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1995 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.

Download or read book Occupational Exposure to Antimony written by National Institute for Occupational Safety and Health and published by . This book was released on 1979 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Competitive Sorption and Transport of Heavy Metals in Soils and Geological Media written by H. Magdi Selim and published by CRC Press. This book was released on 2016-04-19 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most reported incidents of soil contamination include an array of heavy metals species rather than a single ion. The various interactions in these multicomponent or multiple-ion systems significantly impact the fate and transport of heavy metals, and competition for sorption sites on soil matrix surfaces is a common phenomenon. Because of this, con

Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Equilibria and Dynamics of Gas Adsorption on Heterogeneous Solid Surfaces written by W.A. Steele and published by Elsevier. This book was released on 1996-12-17 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fact that the surfaces of real solids are geometrically distorted and chemically non-uniform has long been realized by the scientists investigating various phenomena occurring on solid surfaces. Even in the case when diffraction experiments show a well-organized bulk solid structure, the surface atoms or molecules will usually exhibit a much smaller degree of surface organization. In addition to the results obtained from electron diffraction, this can be seen in the impressive images obtained from STM and AFM microscopies. This geometric and chemical disorder is the source of the energetic heterogeneity for molecules adsorbing on real solid surfaces. Hundreds of papers have been published showing that this heterogeneity is a major factor in determining the behaviour of real adsorption systems.Studies of adsorption on energetically heterogeneous surfaces have proceeded along three somewhat separate paths, with only minor coupling of ideas. One was the study of adsorption equilibria on heterogeneous solid surfaces. The second path was the study of time evolution of adsorption processes such as surface diffusion or adsorption-desorption kinetics on heterogeneous surfaces, and the third was the study of adsorption in porous solids, or more generally, adsorption in systems with limited dimensions. The present monograph is a first attempt to provide a synthesis of the ways that surface geometric and energetic heterogeneities affect both the equilibria and the time evolution of adsorption on real solids. The book contains 17 chapters written by a team of internationally recognized specialists, some of whom have already published books on adsorption.

Download or read book Transition Metal Oxides written by H.H. Kung and published by Elsevier. This book was released on 1989-04-01 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author presents an up-to-date summary of existing information on the structure, electronic properties, chemistry and catalytic properties of transition metal oxides.The subjects covered in the book can be divided into three sections. The first (chapters 1 to 3) covers the structural, physical, magnetic, and electronic properties of transition metal oxides. Although the emphasis is on surface properties, relevant bulk properties are also discussed. The second section (chapters 4 to 7) covers surface chemical properties. It includes topics that describe the importance of surface coordinative unsaturation in adsorption, the formation of surface acidity and the role of acidity in determining surface chemical properties, the nature and reactivities of adsorbed oxygen, and the surface chemistry in the reduction of oxides. The third section (chapters 8 to 14) is on the catalytic properties. Various catalytic reactions including decomposition, hydrogenation, isomerization, metathesis, selective oxidation, and reactions involving carbon oxides are discussed. Emphasis is placed more on reaction mechanisms and the role of catalysts than on kinetics and processes. Chapters on the preparation of oxide catalysts and on photo-assisted processes are also included. Whenever appropriate, relationships between various topics are indicated.Written for surface physicists, chemists, and catalytic engineers, the book will serve as a useful source of information for investigators and as a comprehensive overview of the subject for graduate students.

Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1997 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.

Download or read book Solid State Polymerization written by Constantine D. Papaspyrides and published by John Wiley & Sons. This book was released on 2009-04-27 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most current guide to solid state polymerization Solid State Polymerization (SSP)is an indispensable tool in the design, manufacture, and study of polymers, plastics, and fibers. SSP presents significant advantages over other polymerization techniques due to low operating temperatures, inexpensive equipment, and simple and environmentally sound procedures. Combining fundamentals of polymer science, chemistry, physical chemistry, and engineering, SSP also offers many research applications for a wide range of students and investigators. Gathering and filtering the latest literature on SSP, Solid Solid State Polymerization offers a unique, one-stop resource on this important process. With chapters contributed by leaders in the field, this text summarizes SSP, and provides essential coverage that includes: An introduction to SSP, with chemical and physical steps, apparatus, advantages, and parameters SSP physical chemistry and mechanisms Kinetic aspects of polyesters and polyamides SSP Catalysis in SSP processes Application of SSP under high pressure conditions in the laboratory Engineering aspects regarding process modeling and industrial application Recent developments and future possibilities Solid State Polymerization provides the most up-to-date coverage of this constantly developing field to academic and industry professionals, as well as graduate and postgraduate-level students in chemical engineering, materials science and engineering, polymer chemistry, polymer processing and polymer engineering.

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quantities Units and Symbols in Physical Chemistry written by International Union of Pure and Applied Chemistry. Physical and Biophysical Chemistry Division and published by Royal Society of Chemistry. This book was released on 2007 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the IUPAC Physical Chemistry Division this definitive manual, now in its third edition, is designed to improve the exchange of scientific information among the readers in different disciplines and across different nations. This book has been systematically brought up to date and new sections added to reflect the increasing volume of scientific literature and terminology and expressions being used. The Third Edition reflects the experience of the contributors with the previous editions and the comments and feedback have been integrated into this essential resource. This edition has been compiled in machine-readable form and will be available online.