Download or read book Proceedings of the 3rd RILEM Spring Convention and Conference RSCC 2020 written by Isabel B. Valente and published by Springer Nature. This book was released on 2021-07-05 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “New materials and structures for ultra‐durability”, which covers current scientific and technological developments aimed at improving knowledge about degradation mechanisms in construction materials, as well as to the development of new materials with extreme durability. Novel special materials for extreme environments or extreme loading conditions are also included, as well as novel approaches to improve the performance and durability of currently common construction materials. The following subtopics are included: general purpose, constructions, infrastructures and facilities; extreme environments and extreme events; transport and deterioration mechanisms, characterization and mitigation; Supplementary Cementitious Materials, admixtures, additions and other emerging material optimization strategies; smart materials for durable structures.

Download or read book Brick and Block Masonry written by Claudio Modena and published by CRC Press. This book was released on 2016-11-03 with total page 4087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - Trends, Innovations and Challenges contains the lectures and regular papers presented at the 16th International Brick and Block Masonry Conference (Padova, Italy, 26-30 June 2016). The contributions cover major topics: - Analysis of masonry structures - Bond of composites to masonry - Building physics and durability - Case studies - Codes and standards - Conservation of historic buildings - Earthen constructions - Eco-materials and sustainability - Fire resistance, blasts, and impacts - Masonry bridges, arches and vaults - Masonry infill walls and RC frames - Masonry materials and testing - Masonry repair and strengthening - New construction techniques and technologies - Reinforced and confined masonry - Seismic performance and vulnerability assessment In an ever-changing world, in which innovations are rapidly implemented but soon surpassed, the challenge for masonry, the oldest and most traditional building material, is that it can address the increasingly pressing requirements of quality of living, safety, and sustainability. This abstracts volume and full paper USB device, focusing on challenges, innovations, trends and ideas related to masonry, in both research and building practice, will proof to be a valuable source of information for researchers and practitioners, masonry industries and building management authorities, construction professionals and educators.

Download or read book New Approaches to Building Pathology and Durability written by João M.P.Q. Delgado and published by Springer. This book was released on 2016-03-04 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of recent research works intended to assist in the effective management of service loss. It develops and evaluates methodologies for the assessment of defects and failures, and proposes methodologies for preventing and mitigating building defects. As such, the book will appeal to a broad readership of scientists, practitioners, students and lecturers.

Download or read book Engineering Materials Science written by H McArthur and published by Elsevier. This book was released on 2004-01-01 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhaustive, authoritative and comprehensive, using 160 statistical tables, this book addresses the fundamental structure of materials and remediation, and looks at the properties of water and water-induced degradation and deterioration, with chapters on moisture effects in buildings and materials, corrosion theory and metal protection. The authors explain the behaviour of materials in fires, fundamental fire resistance principles and techniques, calculation of flame temperatures, and the removal of heat by nitrogen and other combustion products. It addresses properties performance, degradation of masonry, plastics, adhesives, sealants, timber, glass and fibre composites, metals and alloy elements. Phase diagrams show cooling curves and structure for metals and alloys. Concrete technology is developed in relation to degradation, electro-potential mapping and cathodic protection of reinforced concrete. The book is fully updated to current British and European standards. - Addresses the fundamental structure of materials and remediation and looks at the properties of water and water-induced degradation and deterioration - Explains the behaviour of materials in fires, fundamental fire resistance principles and techniques, calculation of flame temperatures and the removal of heat - Fully updated to current British and European standards

Download or read book Report 33 Industrial Floors State of the Art Report of RILEM TC 184 IFE written by Peter Seidler and published by RILEM Publications. This book was released on 2006 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bonded Cement Based Material Overlays for the Repair the Lining or the Strengthening of Slabs or Pavements written by Benoît Bissonnette and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among different approaches that can be considered for concrete rehabilitation, bonded overlays are often the most economical alternative. The primary purpose of overlays is to extend the life of the candidate structures, either by restoring the quality and integrity of the surface and/or the re-establishing or improving the load-carrying capacity. Nevertheless, the durability of bonded overlay systems still draws concerns in the technical community because of bond sustainability problems encountered in a number of cases. At this time, there is still no accepted design approach or methodology that can warrant the practitioner a successful outcome of the repair. This State-of-Art report summarizes the findings with respect to all aspects involved in the overlaying process.

Download or read book Non Destructive Evaluation of Reinforced Concrete Structures written by Christiane Maierhofer and published by Elsevier. This book was released on 2010-06-04 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many concrete structures and elements of concrete infrastructure have exceeded their original design lives and are deteriorating to an extent where they are becoming dangerous. The deterioration can be internal or not obvious and therefore only shows up with detailed testing. Non-destructive evaluation of reinforced concrete structures, Volume 1: Deterioration processes and standard test methods reviews the processes of deterioration and classical and standard test methods.Part one discusses deterioration of reinforced concrete and testing problems with chapters on topics such as key issues in the non-destructive testing of concrete structures, when to use non-destructive testing of reinforced concrete structures, deterioration processes in reinforced concrete, modelling ageing and corrosion processes in reinforced concrete structures, components in concrete and their impact on quality, and predicting the service life of reinforced concrete structures. Part two reviews classical and standard testing methods including microscopic examination of deteriorated concrete, the analysis of solid components and their ratios in reinforced concrete structures, the determination of chlorides in concrete structures, and investigating the original water content of reinforced concrete structures.With its distinguished editors and international team of contributors, Non-destructive evaluation of reinforced concrete structures, Volume 1: Deterioration processes and standard test methods will be a standard reference for civil and structural engineers as well as those concerned with making decisions regarding the safety of reinforced concrete structures. - Provides a comprehensive discussion from examination of the components in concrete and their affect on quality through to the role of and tools required for lifetime management - Experts in the field identify the testing problems associated with infrastructure considering design, build and maintenance stages - Presents a guide for when to use non-destructive testing of reinforced concrete structures including the role of time in testing

Download or read book Advanced Concretes and Their Structural Applications written by Zhigang Zhang and published by Frontiers Media SA. This book was released on 2022-09-23 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Structural Engineer written by and published by . This book was released on 2006 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Canadian Journal of Civil Engineering written by and published by . This book was released on 2003 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete Reinforcement Corrosion written by Peter Pullar-Strecker and published by Thomas Telford. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reinforcement corrision is the most important cause of deterioration in reinforced concrete structutres today. By comparing the different repair methods which have been established during recent years and discussing their advantages and drawbacks, this guide details practical approaches to enable non-specialist investigators to carry out at least some initial investigation themselves and considers the problems of detailsed investigations in a way which even the most experienced consultations and their clients will find helpful." - back cover.

Download or read book Repair and Renovation of Concrete Structures written by Ravindra K. Dhir and published by Thomas Telford Publishing. This book was released on 2005 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Preface - Introduction - Organising Committee - Scientific and Technical Committee - Collaborating Institutions - Sponsoring Organisations with Exhibition - Exhibiting Organisations - Supporting Institutions - Opening Paper - Getting it Right - From Testing Through Diagnosis to Lasting Repair THEME 1 DEGRADATION OF CONCRETE STRUCTURES Keynote Paper - On the Role of Moisture in Degradation of Concrete Structures - Condition Survey of Romanian Prestressed Concrete Bridges - The Use of Air Entrainment in Bridges and Highway Structures of the USA - Influence of Design and Construction Details on Localized Degradation of Concrete Structures - Diagnosis and Repair of a Cement Concrete Structure: A Case Study of a Residential Building - Degradation of Concrete in Structures - Water Treatment Infrastructure - Models for Environmental Actions on Reinforced Concrete Structures - Influence of Desulfurised Combustion Gases on Durability of Cooling Towers - Studying the Bond Between Repair Materials and Concrete Substrate - Mathematical Modelling of Strike Penetration Processes into Concrete and Sandy Barriers THEME 2 DEVELOPMENTS IN DIAGNOSTIC TECHNIQUES Keynote Paper - Cover Concrete Evaluation: The Contribution of GRP Techniques Experimental Studies and Field Measurements - Cost Effective Testing of Concrete Structures - Defeating Alkali-Aggregate Reaction Worldwide - Temperature Variations in Concrete Subjected to Cyclic Compressive Loads: Consequences for Diagnostic Applications - A Study About the Rehabilitation Method of Electrochemical Chloride Extraction in Brazil - Loading Tests - Practical Experiences - Possibilities of Optical Fibre Sensors to Monitor Strength in Concrete Structures - Durability of Marine and Coastal Structures - The High Quality Cover and Monitoring Approach - New Suggestions to Measure the Corrosion Level of Reinforcement Using Infrared Thermographic Technology - Fracture Energy of Ultra High Performance Concrete Beams Using Infrared Thermographic Technology - Development of an Automatic Crack Recognition System for Concrete Structures - A Non-Destructive Test to Measure Concrete Permeability - Ultrasonic Inspection of Concrete Structure - New Steps Towards "Transparent" Concrete - On Bonding Repairing Steel Fibre Reinforced Concrete to Hardened Concrete - Condition Assessment of RC Structures by Electro Chemical Method (Linear Polarization) and Accelerated Carbonation Experiments THEME 3: REPAIR MATERIALS AND METHODS Keynote Paper - New Materials. Concepts and Quality Control Systems for Strengthening Concrete Construction - Repair of Foundation for Large Compressor - On the Use of Non-Adequate Primers to the Reinforcing Steel in Concrete Localised Repairs - Evaluating External CFRP Strips and Internal MMFX Steel Shear Bars for Shear Strengthening of Precast Concrete Channel Beams - Evaluation of Corrosion Inhibitors for Remediation of St Mary's Multi-Storey Car Park, Colchester - Improving Efficiency in the Galvanic Cathodic Protection of Concrete Structures - Re-alkalisation of Carbonated Concrete by Alkalline Solutions Absorption and Diffusion Mechanisms - External CFRP Tendons for Bridge Strengthening in Austria - Anchorage of Additional External Prestressing Tendons - Determination of Ductility and Deformability Undeces for FRP Strengthened RC Slabs - Use of FRP Materials for Strengthening Concrete Structures - Effect of Temperature on the Durability of Systems of Strengthening of Concrete Structures - Axial Compressive Strength of Reinforced Concrete Columns Wrapped with Fibre Reinforced Polymers (FRP) - Efficiency of Hybrid FRP Sheets in Strengthening Concrete Beams - Embedded Fibre Bragg Grating Sensors for Monitoring the Health of Concrete Structures - Performances of Bonded An

Download or read book Concrete Materials and Technology written by Kambiz Janamian and published by CRC Press. This book was released on 2023-07-13 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and implementation of high-quality concrete demands an underlying knowledge of concrete fundamentals as well as its constituent materials, and in various formulations. Starting with the basics, Concrete Materials and Technology: A Practical Guide examines the production and chemistry of cement, as well as the different types and their applications. Quality control processes and numerous methods for testing are presented and explained in detail. This book presents the fundamentals of concrete technology and serves as a useful guide for civil engineering students, project managers, concrete quality control managers and technicians. Features: Explains the basics of different components and applications for different types of concrete Presents numerous methods for testing of concrete

Download or read book Siviele Ingenieur in Suid Afrika written by and published by . This book was released on 1992 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Products and Services Catalogue written by and published by . This book was released on 2001 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete Durability and Service Life Planning written by Konstantin Kovler and published by Springer Nature. This book was released on 2020-04-28 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the proceedings of the 3rd International RILEM Workshop on Concrete Durability and Service Life Planning (ConcreteLife’20), held in Haifa, Israel in January 2020. The papers cover a range of topics in concrete curing, cracking in concrete structures, corrosion of steel in concrete, thermal and hygral effects, concrete in cold climates and under high temperatures, recycling, alkali-silica reactions, chloride and sulfate attacks, marine structures, transport phenomena, durability design, microstructure of concrete and volume changes, and life cycle assessment. The book also explores future trends in research, development, and practical engineering applications related to durable concrete construction, and focuses on the design and construction of concrete structures exposed to various environmental conditions and mechanical loading. Given its scope, it offers a valuable asset for all researchers and graduate students in the areas of cement chemistry, cement production, and concrete design.

Download or read book Advanced Techniques for Testing of Cement Based Materials written by Marijana Serdar and published by Springer Nature. This book was released on 2020-02-18 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book examines advanced, non-standardized techniques that have been developed for determining different properties of cement paste, mortar and concrete, and provides state-of-the-art information on methods for monitoring hydration-induced changes in cement-based materials (CBMs). These methods are often nondestructive and allow quasi-continuous monitoring covering the time span from placement of the material to formation of a fully hardened cement composite. The book also presents various applications of acoustic emission for characterizing fresh concrete, recent developments in ultrasonic methods for characterizing CBMs since placement, application of ambient response methods for measuring elastic modulus, methods for determining deformational characteristics of CBMs since setting and methods for in situ measurements of stresses in concrete elements during hardening.