Download or read book The Physics and Mathematics of Adiabatic Shear Bands written by T. W. Wright and published by Cambridge University Press. This book was released on 2002-07-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a research monograph on the material instability known as adiabatic shear banding which often occurs in a plastically deforming material as it undergoes rapid shearing. Plastic deformation generates heat, which eventually softens most materials with continued straining, a process which is usually unstable. In this case the instability results in thin regions of highly deformed material, which are often the sites of further damage and complete failure. The main body of the book examines a series of one-dimensional problems of increasing complexity. In this way a comprehensive and quantitative picture of the complete phenomena is built up. Particular care is taken to use well established asymptotic techniques to find simple, but universal, analytic expressions or scaling laws that encapsulate various aspects of the dynamic formation and the final morphology of shear bands. A fully developed mechanics of shear is just beginning to emerge as a major companion to fracture mechanics, this book may speed the process along.

Download or read book Metallurgical Effects at High Strain Rates written by R. Rohde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A conference on Metallurgical Effects at High Strain Rates was held at Albuquerque, New Mexico, February 5 through 8, 1973, under joint sponsorship of Sandia Laboratories and the Physical Metallurgy Committee of The Metallurgical Society of AIME. This book presents the written proceedings of the meeting. The purpose of the conference was to gather scientists from diverse disciplines and stimulate interdisciplinary discussions on key areas of materials response at high strain rates. In this spirit, it was similar to one of the first highly successful con ferences on this subject held in 1960, in Estes Park, Colorado, on The Response of Metals to High Velocity Deformation. The 1973 conference was able to demonstrate rather directly the increased understanding of high strain rate effects in metals that has evolved over a period of roughly 12 years. In keeping with the interdisciplinary nature of the meeting, the first day was devoted to a tutorial session of invited papers to provide attendees of diverse backgrounds with a common basis of understanding. Sessions were then held with themes centered around key areas of the high strain rate behavior of metals.

Download or read book Split Hopkinson Kolsky Bar written by Weinong W. Chen and published by Springer Science & Business Media. This book was released on 2010-11-11 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors systematically describe the general principles of Kolsky bars, or split Hopkinson bars, which are widely used for obtaining dynamic material properties. Modifications are introduced for obtaining reliable data. Specific experiment design guidelines are provided to subject the specimen to desired testing conditions. Detailed Kolsky-bar examples are given for different classes of materials (brittle, ductile, soft, etc) and for different loading conditions (tension, torsion, triaxial, high/low temperatures, intermediate strain rate, etc). The Kolsky bars used for dynamic structural characterization are briefly introduced. A collection of dynamic properties of various materials under various testing conditions is included which may serve as a reference database. This book assists both beginners and experienced professionals in characterizing high-rate material response with high quality and consistency. Readers who may benefit from this work include university students, instructors, R & D professionals, and scholars/engineers in solid mechanics, aerospace, civil and mechanical engineering, as well as materials science and engineering.

Download or read book Adiabatic Shear Band Formation in Titanium written by M. Laxmi Prasad and published by . This book was released on 1993 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the revised and updated version of the first detailed study of the mechanics and modes of adiabatic shear localization in solids. Building on the success of the first edition, the book provides a systematic description of a number of aspects of adiabatic shear banding. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. Specific chapters focus on energetic materials, polymers, bulk metal glasses, and the mathematics of shear banding as well as the numerical modeling of them. With its detailed coverage of the subject, this book is of great interest to academics and researchers into materials performance as well as professionals. - Up-to-date coverage of the subject and research that has occurred over the past 20 years - Each chapter is written on a different sub-field of adiabatic shear by an acknowledged expert in the field - Detailed and clear discussions of each aspect

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Dynamic Behavior of Materials written by Marc A. Meyers and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.

Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

Download or read book Adiabatic Shear Localization written by Yilong Bai and published by Pergamon. This book was released on 1992-01-01 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the first detailed study of the mechanics and modes of adiabatic shear localization in solids, and provides a systematic description of a number of aspects of adiabatic shear banding. The inclusion of the appendices which provide a quick reference section and a comprehensive collection of thermomechanical data allows rapid access and understanding of the subject and its phenomena. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. This reference book has come about in response to the pressing demand of mechanical and metallurgical engineers for a high quality summary of the knowledge gained over the last twenty years. While fulfilling this requirement, the book is also of great interest to academics and researchers into materials performance.

Download or read book Opportunities in Protection Materials Science and Technology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2011-08-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Armor plays a significant role in the protection of warriors. During the course of history, the introduction of new materials and improvements in the materials already used to construct armor has led to better protection and a reduction in the weight of the armor. But even with such advances in materials, the weight of the armor required to manage threats of ever-increasing destructive capability presents a huge challenge. Opportunities in Protection Materials Science and Technology for Future Army Applications explores the current theoretical and experimental understanding of the key issues surrounding protection materials, identifies the major challenges and technical gaps for developing the future generation of lightweight protection materials, and recommends a path forward for their development. It examines multiscale shockwave energy transfer mechanisms and experimental approaches for their characterization over short timescales, as well as multiscale modeling techniques to predict mechanisms for dissipating energy. The report also considers exemplary threats and design philosophy for the three key applications of armor systems: (1) personnel protection, including body armor and helmets, (2) vehicle armor, and (3) transparent armor. Opportunities in Protection Materials Science and Technology for Future Army Applications recommends that the Department of Defense (DoD) establish a defense initiative for protection materials by design (PMD), with associated funding lines for basic and applied research. The PMD initiative should include a combination of computational, experimental, and materials testing, characterization, and processing research conducted by government, industry, and academia.

Download or read book Nanocrystals and Nanostructures written by Claudia Maria Simonescu and published by BoD – Books on Demand. This book was released on 2018-10-17 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystals and nanostructures attract a special attention in the recent years due to their various properties and a wide range of applications such as in electrical, optical, optoelectronic, catalytic, medicine, chemo- and biosensing, and environmental protection fields. Although extensive research has been done in the field of nanocrystals, it is considered one growing research field. The main goal of this book is to present the current research activities in the field of nanocrystals and nanostructures covering issues regarding new synthesis methods, self-assembly strategies, characterization techniques, properties, and applications. Interesting reports regarding biomimetic modeling of the biomineralization processes and theoretical models to describe mechanisms of deformation twinning in nanocrystalline and ultrafine-grained materials have been presented. By structuring, approaching, and content, the work may be useful for specialist in the field of nano-/materials science, PhD students, students, and all those interested in this topic of high relevance.

Download or read book Analytical Heat Diffusion Theory written by Alekseĭ Vasilʹevich Lykov and published by Academic Press. This book was released on 1968-01-28 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Heat Diffusion Theory is a revised edition of an earlier book by Academician Luikov, which was widely used throughout the Soviet Union and the surrounding socialist countries. This book is divided into 15 chapters that treat heat conduction problems by the classical methods and emphasize the advantages of the transform method, particularly in obtaining short time solutions of many transient problems. This book starts with a discussion on the physical fundamentals, generalized variables, and solution of boundary value problems of heat transfer. Considerable chapters are devoted to the basic classical heat transfer problems and problems in which the body surface temperature is a specified function of time. Other chapters explore the heat transfer problems under different heat sources, including continuous and pulse-type. The discussion then shifts to the problem of freezing wet ground, two-dimensional temperature field, and heat conduction with variable transfer coefficients. The final chapters deal with the fundamentals of the integral transforms and their application to heat conduction problems. These chapters also look into the application of the theory of analytic functions to the heat conduction theory of mathematical physics. This book is an invaluable source for advanced undergraduate or graduate in analytical heat transfer.

Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years.Of interest to all mechanical, manufacturing and materials engineersTheoretical and practical problems addressed

Download or read book Additive and Traditionally Manufactured Components written by Joshua Pelleg and published by Elsevier. This book was released on 2020-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM.

Download or read book The Science of Armour Materials written by Ian Crouch and published by Woodhead Publishing. This book was released on 2016-09-21 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science of Armour Materials comprehensively covers the range of armor materials from steels and light alloys, through glasses and ceramics, to fibers, textiles, and protective apparel. The book also discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies. Each chapter is written from an international perspective, including reviews of the current global literature, and incorporates case studies that focus upon real life applications, research outcomes, and lessons learned. The threat spectrum is restricted to small arms ammunition, high velocity fragments, and stab and spike attacks, as well as blast loadings. - Features input from an editor who is an expert in his field: Dr. Ian Crouch, the author of over 80 publications in his field, with three patents to his name - Provides systematic and comprehensive coverage of armor materials, modeling, and testing - Offers a cross-disciplinary approach that brings together expertise in materials science and defense engineering - Discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies

Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.

Download or read book Materials at High Strain Rates written by T.Z. Blazynski and published by Springer Science & Business Media. This book was released on 1987-07-31 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: