Download or read book Adhesion Promotion Techniques written by K.L. Mittal and published by CRC Press. This book was released on 1999-02-02 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the state of the art in improving bond strength between different materials for many manufacturing processes. The text explores up-to-date, high-quality adhesion technologies for a wide variety of materials, explaining current capabilities of adhesion promotion for both students and seasoned researchers. It reviews the suitable chemistry or morphology for enhanced adhesion to metal, plastic and wood surfaces.
Download or read book Adhesion Promotion Techniques written by K.L. Mittal and published by CRC Press. This book was released on 1999-02-02 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the state of the art in improving bond strength between different materials for many manufacturing processes. The text explores up-to-date, high-quality adhesion technologies for a wide variety of materials, explaining current capabilities of adhesion promotion for both students and seasoned researchers. It reviews the suitable chemistry o
Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.
Download or read book Handbook of Adhesive Technology Revised and Expanded written by Antonio Pizzi and published by CRC Press. This book was released on 2003-08-06 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.
Download or read book Handbook of Adhesion written by D. E. Packham and published by John Wiley & Sons. This book was released on 2006-02-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the successful Handbook of Adhesion provides concise and authoritative articles covering many aspects of the science and technology associated with adhesion and adhesives. It is intended to fill a gap between the necessarily simplified treatment of the student textbook and the full and thorough treatment of the research monograph and review article. The articles are structured in such a way, with internal cross-referencing and external literature references, that the reader can build up a broader and deeper understanding, as their needs require. This second edition includes many new articles covering developments which have risen in prominence in the intervening years, such as scanning probe techniques, the surface forces apparatus and the relation between adhesion and fractal surfaces. Advances in understanding polymer - polymer interdiffusion are reflected in articles drawing out the implications for adhesive bonding. In addition, articles derived from the earlier edition have been revised and updated where needed. Throughout the book there is a renewed emphasis on environmental implications of the use of adhesives and sealants. The scope of the Handbook, which features nearly 250 articles from over 60 authors, includes the background science - physics, chemistry and material science - and engineering, and also aspects of adhesion relevant to the use of adhesives, including topics such as: Sealants and mastics Paints and coatings Printing and composite materials Welding and autohesion Engineering design The Handbook of Adhesion is intended for scientists and engineers in both academia and industry, requiring an understanding of the various facets of adhesion.
Download or read book Adhesive Bonding written by Robert D. Adams and published by Woodhead Publishing. This book was released on 2021-07-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive Bonding: Science, Technology and Applications, Second Edition guides the reader through the fundamentals, mechanical properties and applications of adhesive bonding. This thoroughly revised and expanded new edition reflects the many advances that have occurred in recent years. Sections cover the fundamentals of adhesive bonding, explaining how adhesives and sealants work, and how to assess and treat surfaces, how adhesives perform under stress and the factors affecting fatigue and failure, stress analysis, environmental durability, non-destructive testing, impact behavior, fracture mechanics, fatigue, vibration damping, and applications in construction, automotive, marine, footwear, electrical engineering, aerospace, repair, electronics, biomedicine, and bonding of composites. With its distinguished editor and international team of contributors, this book is an essential resource for industrial engineers, R&D, and scientists working with adhesives and their industrial applications, as well as researchers and advanced students in adhesion, joining, polymer science, materials science and mechanical engineering. Offers detailed, methodical coverage of the fundamentals, mechanical properties and industrial applications of adhesive bonding Enables the successful preparation of adhesives for a broad range of important load-bearing applications in areas such as automotive and aerospace, construction, electronics and biomedicine Covers the latest advances in adhesive bonding, including improved repair techniques for metallic and composite structures, cohesive zone modeling, and disassembly and recycling
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.
Download or read book Adhesion in Foods written by Amos Nussinovitch and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the layman, adhesion is a simple matter of how well two different materials stick together, and adhesion measurements provide some indication of the force required to separate them. However, a more detailed look at adhesion shows that it is a very important feature of food throughout its manufacturing, packaging and storage. Chapters are fully devoted to the fascinating topic of adhesion in foods. Key features of the book include, but are not limited to: definition and nomenclature of adhesion; adhesion mechanisms and measurements; stickiness in various foods and its relation to technological processes; perception of stickiness; hydrocolloids as adhesive agents for foods; adhesion phenomena in coated, battered, breaded and fried foods; electrostatic adhesion in foods; multilayered adhered food products, and adhesion of substances to packaging and cookware. Adhesion in Foods: Fundamental Principles and Applications is dedicated not only to the academic community but also to the broader population of industrialists and experimentalists who will find it to be not only a source of knowledge, but also a launching pad for novel ideas and inventions. In particular, this book is expected to be of interest to personnel involved in food formulation, food scientists, food technologists, industrial chemists and engineers, and those working in product development.
Download or read book Surface Preparation Techniques for Adhesive Bonding written by Raymond F. Wegman and published by William Andrew. This book was released on 2012-12-31 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Preparation Techniques for Adhesive Bonding is an essential guide for materials scientists, mechanical engineers, plastics engineers, scientists and researchers in manufacturing environments making use of adhesives technology. Wegman and van Twisk provide practical coverage of a topic that receives only cursory treatment in more general books on adhesives, making this book essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics. Wegman and van Twisk provide a wealth of practical information on the processing of substrate surfaces prior to adhesive bonding. The processing of aluminum and its alloys, titanium and its alloys, steels, copper and its alloys, and magnesium are treated in the form of detailed specifications with comparative data. Other metals not requiring extensive treatment are also covered in detail, as are metal matrix and organic matrix composites, thermosets and thermoplastics. This new edition has been updated with coverage of the latest developments in the field including the sol-gel process for aluminum, titanium, and stainless steel, atmospheric plasma treatment for metals, plastics and rubbers and treatments for bronze and nickel alloys. Updated to include recent technological developments and chemicals currently prescribed for cleaning and surface preparation; a new generation of adhesives technologists can benefit from this classic guide Enables Materials and Process personnel to select the best process available for their particular application Practical coverage of a topic that receives only cursory coverage in more general books on adhesives: essential reading for adhesion specialists, plastics engineers, and a wide range of engineers and scientists working in sectors where adhesion is an important technology, e.g. automotive / aerospace, medical devices, electronics
Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in
Download or read book Surface Treatment of Materials for Adhesive Bonding written by Sina Ebnesajjad and published by William Andrew. This book was released on 2013-10-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at engineers and materials scientists in a wide range of sectors, this book is a unique source of surface preparation principles and techniques for plastics, thermosets, elastomers, ceramics and metals bonding. With emphasis on the practical, it draws together the technical principles of surface science and surface treatments technologies to enable practitioners to improve existing surface preparation processes to improve adhesion and, as a result, enhance product life. This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be an exhaustive overview, including more detailed explanation where necessary, in a continuous and logical progression. The book provides a necessary grounding in the science and practice of adhesion, without which adequate surface preparation is impossible. Surface characterization techniques are included, as is an up-to-date assessment of existing surface treatment technologies such as Atmospheric Plasma, Degreasing, Grit blasting, laser ablation and more. Fundamental material considerations are prioritised over specific applications, making this book relevant to all industries using adhesives, such as medical, automotive, aerospace, packaging and electronics. This second edition represents a full and detailed update, with all major developments in the field included and three chapters added to cover ceramic surface treatment, plasma treatment of non-metallic materials, and the effect of additives on surface properties of plastics. A vital resource for improving existing surface treatment processes to increase product life by creating stronger, more durable adhesive bonds Relevant across a variety of industries, including medical, automotive and packaging Provides essential grounding in the science of surface adhesion, and details how this links with the practice of surface treatment
Download or read book Handbook of Adhesive Technology written by Antonio Pizzi and published by CRC Press. This book was released on 2017-12-15 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic reference examines the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating recent innovation and improved instrumentation, the work offers broad and comprehensive coverage. This edition incorporates several new adhesive classes, new application topics, and recent developments with nanoadhesives and bio-based adhesives. Existing chapters are thoroughly updated, revised, or replaced and authored by top specialists in the field. Abundant figures, tables, and equations appear throughout the work.
Download or read book Applied Adhesive Bonding written by Gerd Habenicht and published by John Wiley & Sons. This book was released on 2008-12-17 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides the most important information on successful bonding. Various practical advices and helpful tips are useful for the handling of adhesives. Due to its didactically structured content, the book may also serve as a medium for training courses in bonding engineering. The basics of this innovative joining procedure are described in a practical and easily understandable way suitable for the application in trade and industry.
Download or read book Handbook of Adhesion Promoters written by George Wypych and published by Elsevier. This book was released on 2023-02-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Adhesion Promoters, Second Edition outlines known mechanisms, principles of use, and the applications of different groups of adhesion promoters, along with a discussion of the mechanisms that cause adhesion loss, such as corrosion, delamination, detachment, liquid penetration and peeling. Surface condition and treatment are also discussed, including different methods (cleaning, mechanical, plasma, microwave, flame, corona discharge, laser, UV, and chemical modification) for practical applications. Formulation of typical primers used in the application of adhesives, sealants, coatings, coil coatings, cosmetics, metal, optical devices, polymers and plastics are covered, with over 50 primer formulations provided. In addition, a full chapter is dedicated to the subject of polymer modification for improved adhesion, a method frequently used instead of the addition of adhesion promoters. The book's final chapters contain information on available evaluation and selection of adhesion promoters that work with different polymers (29), products (28), and those that help to prevent corrosion. Provides detailed, essential data on adhesion promoters, including additives that are both widely used and recently introduced Covers critical aspects involved in the application of adhesion promoters Discusses mechanisms that result in adhesion loss, primer formulation, polymer modification for improved adhesion, and surface treatment methods Supports readers in the selection of adhesion promoters, including detailed information on adhesion promoter properties, applications and their potential
Download or read book Adhesion Measurement Methods written by Robert Lacombe and published by CRC Press. This book was released on 2005-11-21 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesion Measurement Methods: Theory and Practice provides practical information on the most important measurement techniques, their unique advantages and disadvantages, and the selection of the proper method for a given application. It includes useful information and formulae on adhesion related matters such as driving force formulae for various m
Download or read book Specialist Yarn and Fabric Structures written by R H Gong and published by Elsevier. This book was released on 2011-09-14 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specialist yarn, woven and fabric structures are key elements in the manufacturing process of many different types of textiles with a variety of applications. This book explores a number of different specialist structures, discussing the developments in technology and manufacturing processes that have taken place in recent years. With its distinguished editor and international team of contributors, Specialist yarn, woven and fabric structures is essential reading for all textile researchers, technicians, engineers and technologies, and will also be suitable for academic purposes. Looks at developments that have occurred in the manufacturing of specialist yarn, weave and fabric structures Discusses different types of specialist yarn structures, such as hybrid, fancy and compound yarns Offers insight into multicomponent fabric structures such as 3D nonwovens, flocked, knotted and jacquard woven fabrics