Download or read book Mechanics of Microelectronics written by G.Q. Zhang and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by leading experts with both profound knowledge and rich practical experience in advanced mechanics and the microelectronics industry essential for current and future development. It aims to provide the cutting edge knowledge and solutions for various mechanical related problems, in a systematic way. It contains important and detailed information about the state-of-the-art theories, methodologies, the way of working and real case studies.

Download or read book Microelectronics Packaging Handbook written by R.R. Tummala and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics has become the largest industry, surpassing agriculture, auto, and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan, Korea, Singapore, Hong Kong, and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors, the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries, displays, magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies, from mainframe and supercomputer applications at any cost, to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example, going from $500IMIP when products were first introduced in 1981, to a projected $IIMIP within 10 years. Thin, light portable, user friendly and very low-cost are, therefore, the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection, powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.

Download or read book Microelectronics and Microsystems Packaging written by and published by . This book was released on 2001 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adhesion International 1993 written by Louis H. Sharpe and published by CRC Press. This book was released on 2020-01-29 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1996. ADHESION INTERNATIONAL 1993 is a volume of the Proceedings of the 16th Annual Meeting of The Adhesion Society, Inc. Williamsburg, Virginia, USA February 21-26,1993. This meeting featured an International Symposium on The Interphase. Interphases are extremely important in many areas of technology. They are formed when dissimilar materials are joined and they control the properties of adhesive joints, composites, coatings, and microelectronics devices. Considering the importance and scope of phenomena associated with the interphase, it was appropriate to convene such a symposium at the meeting.

Download or read book Adhesion in Microelectronics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings

Download or read book Die Attach Materials for High Temperature Applications in Microelectronics Packaging written by Kim S. Siow and published by Springer. This book was released on 2019-01-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the scientific principles, processing conditions, probable failure mechanisms, and a description of reliability performance and equipment required for implementing high-temperature and lead-free die attach materials. In particular, it addresses the use of solder alloys, silver and copper sintering, and transient liquid-phase sintering. While different solder alloys have been used widely in the microelectronics industry, the implementation of sintering silver and transient liquid-phase sintering remains limited to a handful of companies. Hence, the book devotes many chapters to sintering technologies, while simultaneously providing only a cursory coverage of the more widespread techniques employing solder alloys. Addresses the differences between sintering and soldering (the current die-attach technologies), thereby comprehensively addressing principles, methods, and performance of these high-temperature die-attach materials; Emphasizes the industrial perspective, with chapters written by engineers who have hands-on experience using these technologies; Baker Hughes, Bosch and ON Semiconductor, are represented as well as materials suppliers such as Indium; Simultaneously provides the detailed science underlying these technologies by leading academic researchers in the field.

Download or read book Quality Conformance and Qualification of Microelectronic Packages and Interconnects written by Michael Pecht and published by John Wiley & Sons. This book was released on 1994-12-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: All packaging engineers and technologists who want to ensure thatthey give their customers the highest quality, most cost-effectiveproducts should know that the paradigm has shifted. It has shiftedaway from the MIL-STDs and other government standards and testprocedures that don't cost-effectively address potential failuremechanisms or the manufacturing processes of the product. It hasshifted decisively towards tackling the root causes of failure andthe appropriate implementation of cost-effective process controls,qualityscreens, and tests. This book's groundbreaking, science-based approach to developingqualification and quality assurance programs helps engineers reacha new level of reliability in today's high-performancemicroelectronics. It does this with powerful... * Techniques for identifying and modeling failure mechanismsearlier in the design cycle, breaking the need to rely on fielddata * Physics-of-failure product reliability assessment methods thatcan be proactively implemented throughout the design andmanufacture of the product * Process controls that decrease variabilities in the end productand reduce end-of-line screening and testing A wide range of microelectronic package and interconnectconfigurations for both single-and multi-chip modules is examined,including chip and wire-bonds, tape-automated (TAB), flip-TAB,flip-chip bonds, high-density interconnects, chip-on-board designs(COB), MCM, 3-D stack, and many more. The remaining packageelements, such as die attachment, case and lid, leads, and lid andlead seals are also discussed in detail. The product of a distinguished team of authors and editors, thisbook's guidelines for avoiding potential high-risk manufacturingand qualification problems, as well as for implementing ongoingquality assurance, are sure to prove invaluable to both studentsand practicing professionals. For the professional engineer involved in the design andmanufacture of products containing electronic components, here is acomprehensive handbook to the theory and methods surrounding theassembly of microelectronic and electronic components. The bookfocuses on computers and consumer electronic products with internalsubsystems that reflect mechanical design constraints, costlimitations, and aesthetic and ergonomic concerns. Taking a totalsystem approach to packaging, the book systematically examines:basic chip and computer architecture; design and layout;interassembly and interconnections; cooling scheme; materialsselection, including ceramics, glasses, and metals; stress,vibration, and acoustics; and manufacturing and assemblytechnology. 1994 (0-471-53299-1) 800 pp. INTEGRATED CIRCUIT, HYBRID, AND MULTICHIP MODULE PACKAGE DESIGNGUIDELINES: A Focus on Reliability --Michael Pecht This comprehensive guide features a uniquely organized time-phasedapproach to design, development, qualification, manufacture, andin-service management. It provides step-by-step instructions on howto define realistic system requirements, define the system usageenvironment, identify potential failure modes, characterizematerials and processes by the key control label factors, and useexperiment, step-stress, and accelerated methods to ensure optimumdesign before production begins. Topics covered include: detaileddesign guidelines for substrate...wire and wire, tape automated,and flip-chip bonding...element attachment and case, lead, lead andlid seals--incorporating dimensional and geometric configurationsof package elements, manufacturing and assembly conditions,materials selection, and loading conditions. 1993 (0-471-59446-6)454 pp.

Download or read book Chemistry in Microelectronics written by Yannick Le Tiec and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronics is a complex world where many sciences need to collaborate to create nano-objects: we need expertise in electronics, microelectronics, physics, optics and mechanics also crossing into chemistry, electrochemistry, as well as biology, biochemistry and medicine. Chemistry is involved in many fields from materials, chemicals, gases, liquids or salts, the basics of reactions and equilibrium, to the optimized cleaning of surfaces and selective etching of specific layers. In addition, over recent decades, the size of the transistors has been drastically reduced while the functionality of circuits has increased. This book consists of five chapters covering the chemicals and sequences used in processing, from cleaning to etching, the role and impact of their purity, along with the materials used in “Front End Of the Line” which corresponds to the heart and performance of individual transistors, then moving on to the “Back End Of the Line” which is related to the interconnection of all the transistors. Finally, the need for specific functionalization also requires key knowledge on surface treatments and chemical management to allow new applications. Contents 1. Chemistry in the “Front End of the Line” (FEOL): Deposits, Gate Stacks, Epitaxy and Contacts, François Martin, Jean-Michel Hartmann, Véronique Carron and Yannick Le Tiec. 2. Chemistry in Interconnects, Vincent Jousseaume, Paul-Henri Haumesser, Carole Pernel, Jeffery Butterbaugh, Sylvain Maîtrejean and Didier Louis. 3. The Chemistry of Wet Surface Preparation: Cleaning, Etching and Drying, Yannick Le Tiec and Martin Knotter. 4. The Use and Management of Chemical Fluids in Microelectronics, Christiane Gottschalk, Kevin Mclaughlin, Julie Cren, Catherine Peyne and Patrick Valenti. 5. Surface Functionalization for Micro- and Nanosystems: Application to Biosensors, Antoine Hoang, Gilles Marchand, Guillaume Nonglaton, Isabelle Texier-Nogues and Francoise Vinet. About the Authors Yannick Le Tiec is a technical expert at CEA-Leti, Minatec since 2002. He is a CEA-Leti assignee at IBM, Albany (NY) to develop the advanced 14 nm CMOS node and the FDSOI technology. He held different technical positions from the advanced 300 mm SOI CMOS pilot line to different assignments within SOITEC for advanced wafer development and later within INES to optimize solar cell ramp-up and yield. He has been part of the ITRS Front End technical working group at ITRS since 2008.

Download or read book Encyclopedia of Analytical Science written by and published by Elsevier. This book was released on 2019-04-02 with total page 5142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Encyclopedia of Analytical Science, Ten Volume Set is a definitive collection of articles covering the latest technologies in application areas such as medicine, environmental science, food science and geology. Meticulously organized, clearly written and fully interdisciplinary, the Encyclopedia of Analytical Science, Ten Volume Set provides foundational knowledge across the scope of modern analytical chemistry, linking fundamental topics with the latest methodologies. Articles will cover three broad areas: analytical techniques (e.g., mass spectrometry, liquid chromatography, atomic spectrometry); areas of application (e.g., forensic, environmental and clinical); and analytes (e.g., arsenic, nucleic acids and polycyclic aromatic hydrocarbons), providing a one-stop resource for analytical scientists. Offers readers a one-stop resource with access to information across the entire scope of modern analytical science Presents articles split into three broad areas: analytical techniques, areas of application and and analytes, creating an ideal resource for students, researchers and professionals Provides concise and accessible information that is ideal for non-specialists and readers from undergraduate levels and higher

Download or read book Influence of Temperature on Microelectronics and System Reliability written by Pradeep Lall and published by CRC Press. This book was released on 2020-07-09 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book raises the level of understanding of thermal design criteria. It provides the design team with sufficient knowledge to help them evaluate device architecture trade-offs and the effects of operating temperatures. The author provides readers a sound scientific basis for system operation at realistic steady state temperatures without reliability penalties. Higher temperature performance than is commonly recommended is shown to be cost effective in production for life cycle costs. The microelectronic package considered in the book is assumed to consist of a semiconductor device with first-level interconnects that may be wirebonds, flip-chip, or tape automated bonds; die attach; substrate; substrate attach; case; lid; lid seal; and lead seal. The temperature effects on electrical parameters of both bipolar and MOSFET devices are discussed, and models quantifying the temperature effects on package elements are identified. Temperature-related models have been used to derive derating criteria for determining the maximum and minimum allowable temperature stresses for a given microelectronic package architecture. The first chapter outlines problems with some of the current modeling strategies. The next two chapters present microelectronic device failure mechanisms in terms of their dependence on steady state temperature, temperature cycle, temperature gradient, and rate of change of temperature at the chip and package level. Physics-of-failure based models used to characterize these failure mechanisms are identified and the variabilities in temperature dependence of each of the failure mechanisms are characterized. Chapters 4 and 5 describe the effects of temperature on the performance characteristics of MOS and bipolar devices. Chapter 6 discusses using high-temperature stress screens, including burn-in, for high-reliability applications. The burn-in conditions used by some manufacturers are examined and a physics-of-failure approach is described. The

Download or read book Moisture Sensitivity of Plastic Packages of IC Devices written by X.J. Fan and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture Sensitivity of Plastic Packages of IC Devices provides information on the state-of-the-art techniques and methodologies related to moisture issues in plastic packages. The most updated, in-depth and systematic technical and theoretical approaches are addressed in the book. Numerous industrial applications are provided, along with the results of the most recent research and development efforts, including, but not limited to: thorough exploration of moisture's effects based on lectures and tutorials by the authors, consistent focus on solution-based approaches and methodologies for improved reliability in plastic packaging, emerging theories and cutting-edge industiral applications presented by the leading professionals in the field. Moisture plays a key role in the reliability of plastic packages of IC devices, and moisture-induced failures have become an increasing concern with the development of advanced IC devices. This second volume in the Micro- and Opto-Electronic Materials, Structures, and Systems series is a must-read for researchers and engineers alike.

Download or read book Surface Coatings Technology written by J. P. G. Farr and published by Elsevier. This book was released on 2016-06-03 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology represents the start of a new era for the journal, not only with the change in title to Surface and Coatings Technology, but also with the significant change in the journal's scope, which is intended to place it in the forefront of the coatings and surface modification field. This presents volume contains 100 contributions. It is intended to become the principal forum for the interchange of information on the science, technology, and application of coatings and modified surfaces as they relate to modification of the mechanical, chemical, or optical properties of materials. The aim of the journal is to publish research papers and invited review articles on various subjects. A new feature will be the addition of a short section at the beginning of each issue in which each author states which technical problems are being addressed in his article. These will be catalogued at the end of each year in order that a scientist or engineer who has a particular problem related to coatings can determine whether there were any papers that addressed the problem. It is hoped that Surface and Coatings Technology will have a significant impact in one of the most exciting areas of materials research being investigated today.

Download or read book Adhesive Bonding in Photonics Assembly and Packaging written by B. G. Yacobi and published by American Scientific Publishers. This book was released on 2003 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Interconnects for ULSI Technology written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2012-04-02 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding new materials for copper/low-k interconnects is critical to the continuing development of computer chips. While copper/low-k interconnects have served well, allowing for the creation of Ultra Large Scale Integration (ULSI) devices which combine over a billion transistors onto a single chip, the increased resistance and RC-delay at the smaller scale has become a significant factor affecting chip performance. Advanced Interconnects for ULSI Technology is dedicated to the materials and methods which might be suitable replacements. It covers a broad range of topics, from physical principles to design, fabrication, characterization, and application of new materials for nano-interconnects, and discusses: Interconnect functions, characterisations, electrical properties and wiring requirements Low-k materials: fundamentals, advances and mechanical properties Conductive layers and barriers Integration and reliability including mechanical reliability, electromigration and electrical breakdown New approaches including 3D, optical, wireless interchip, and carbon-based interconnects Intended for postgraduate students and researchers, in academia and industry, this book provides a critical overview of the enabling technology at the heart of the future development of computer chips.

Download or read book Polymer Surfaces and Interfaces Characterization Modification and Application written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric materials are used for a legion of applications in a wide array of technological areas, and their proper surface/interface characteristics are of cardinal importance for their applications. Therefore, the need to characterize polymer surfaces/interfaces and their suitable modification to impart desired characteristics is quite patent. This book chronicles the proceedings of the Symposium on Polymer Surfaces and Interfaces: Characterization, Modification and Application held as a part of the Society of Plastics Engineers Annual Technical Conference, Boston, May 7--11, 1995. The articles in this book address many aspects of polymer surfaces and interfaces. Topics covered include: various ways (chemical, photochemical, laser, flame, corona) to modify polymer surfaces; modification of contact lens surfaces; various ways to analyze/characterize polymer surfaces; metal/polymer interfaces; metal/polyimide adhesion; metal/self-assembled organic monolayer interfaces; polymer alignment layers for liquid crystals; alignment of liquid crystal surfaces; polyimide alignment layers; molecular re-orientation of polymer surfaces; plasma polymerized organic coatings; epoxy/fiber interphase; epoxy underfill materials for packaging integrated circuits; transport in polymers; polymer miscibility; and cell adhesion.

Download or read book Proceedings of the International Microelectronics Symposium written by and published by . This book was released on 1968 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adhesive Bonding written by Robert D. Adams and published by Elsevier. This book was released on 2005-03-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important collection reviews key research on adhesive behaviour and applications in sectors as diverse as construction and automotive engineering. The book is divided into three main parts: fundamentals, mechanical properties and applications. Part one focuses on the basic properties of adhesives, surface assessment and treatment. Part two concentrates on understanding how adhesives perform under stress and the factors affecting fatigue and failure. The final part of the book reviews industry specific applications in areas such as building and construction, transport and electrical engineering.With its distinguished editor and international team of contributors, Adhesive bonding is a standard reference for all those concerned with the industrial application of adhesives. - Essential information for all those concerned with the industrial application of adhesives - This important collection examines adhesives and adhesive bonding for load-bearing applications - Arranged in a user-friendly format with three main sections: fundamentals, generic uses and industry specific applications