Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Additive Manufacturing Materials Processes Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. - Includes a discussion of the historical development and physical principles of current AM technologies - Exposes readers to the engineering principles for evaluating and quantifying AM technologies - Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics

Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts

Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. - Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes - Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject - Includes case studies of innovative additive manufacturing practices from industry

Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.

Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. - Provides a comprehensive one-volume overview of advances in laser additive manufacturing - Presents detailed coverage of the latest techniques used for laser additive manufacturing - Reviews both established and emerging areas of application

Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. - Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) - Discusses available commercial metal AM technologies and their relative strengths and weaknesses - Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM

Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr

Download or read book Additive Manufacturing Applications for Metals and Composites written by Balasubramanian, K.R. and published by IGI Global. This book was released on 2020-06-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) of metals and composites using laser energy, direct energy deposition, electron beam methods, and wire arc melting have recently gained importance due to their advantages in fabricating the complex structure. Today, it has become possible to reliably manufacture dense parts with certain AM processes for many materials, including steels, aluminum and titanium alloys, superalloys, metal-based composites, and ceramic matrix composites. In the near future, the AM material variety will most likely grow further, with high-performance materials such as intermetallic compounds and high entropy alloys already under investigation. Additive Manufacturing Applications for Metals and Composites is a pivotal reference source that provides vital research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the manufacturing process, and the resulted microstructures and properties, as well as the relationship between these factors. While highlighting topics such as numerical modeling, intermetallic compounds, and statistical techniques, this publication is ideally designed for students, engineers, researchers, manufacturers, technologists, academicians, practitioners, scholars, and educators.

Download or read book 3D Printing and Additive Manufacturing Technologies written by L. Jyothish Kumar and published by Springer. This book was released on 2018-06-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing technologies have sparked a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across such diverse industries as consumer products, aerospace, medical devices and automotive engineering. This book will help designers, R&D personnel, and practicing engineers grasp the latest developments in the field of 3D Printing and Additive Manufacturing.

Download or read book Light Weight Materials written by Kaushik Kumar and published by John Wiley & Sons. This book was released on 2021-12-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the automotive and aerospace industries, the need for strong yet light materials has given rise to extensive research into aluminum and magnesium alloys and formable titanium alloys. All of these are categorized as light weight materials. The distinguishing feature of light weight materials is that they are low density, but they have a wide range of properties and, as a result, a wide range of applications. This book provides researchers and students with an overview of the recent advancements in light weight material processing, manufacturing and characterization. It contains chapters by eminent researchers on topics associated with light weight materials, including on the current buzzword “composite materials”. First, this book describes the current status of light weight materials. Then, it studies applications of these materials, given that, as the densities vary, so do the applications, ranging from automobiles and aviation to bio-mechatronics. This book will therefore serve as an excellent guide to this field.

Download or read book Friction Based Additive Manufacturing Technologies written by Sandeep Rathee and published by CRC Press. This book was released on 2018-04-17 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, most of the major commercial metal additive manufacturing (MAM) techniques rely on liquid phase processing. The liquid to solid phase transformations in these techniques results in microstructural issues and defects which in turn tantamount to inferior properties of fabricated build. Friction based additive manufacturing technologies are solid state processing techniques which work on the principles of friction based joining processes and layer by layer additive manufacturing. This book primarily addresses the basic understanding of seven friction based additive manufacturing techniques. These techniques include additive manufacturing methods based on rotary friction welding, linear friction welding, friction deposition, friction surfacing, friction stir additive manufacturing, friction assisted seam welding and additive friction stir. The principle of operations, benefits, limitations and recent developments of each technique has been described. It covers potentional and probable applications of each technique through review of various experimental studies. Features Targets friction based solid state additive manufacturing of metallic materials Describes principle of operation of seven friction based additive manufacturing techniques Reviews latest trends of these processes via experimental studies Describes benefits and limitations of each technique Covers current and probable applications of these techniques

Download or read book Additive Manufacturing Processes written by Sanjay Kumar and published by Springer Nature. This book was released on 2020-05-26 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference to additive manufacturing, accessible to anyone with a basic background in engineering and materials science. Unlike other books on additive manufacturing that include coverages of things such as machine architecture, applications, business and present market conditions, this book focuses on providing comprehensive coverage of currently available additive manufacturing processes. All processes are explained with the help of various, original diagrams, useful for beginners and advanced researchers alike. Provides comprehensive coverages of all current processes available in additive manufacturing; Explains processes with the help of various original diagrams; Explains future process development at the last chapter, providing research outlook; Includes extensive references at the end of each chapter for further reading of original research.

Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo

Download or read book Additive Manufacturing written by Manu Srivastava and published by CRC Press. This book was released on 2019-09-16 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing need for manufacturing optimization all over the world. The immense market of Additive Manufacturing (AM) technologies dictates a need for a book that will provide knowledge of the various aspects of AM for anyone interested in learning about this fast-growing topic. This book disseminates knowledge of AM amongst scholars at graduate level, post graduate level, doctoral level, as well as industry personnel. The objective is to offer a state-of-the-art book which covers all aspects of AM and incorporates all information regarding trends, historical developments, classifications, materials, tooling, software issues, dynamic design, principles, limitations, and communication interfaces in a one-stop resource. Features: Breaks down systematic coverage of various aspects of AM within four distinct sections Contains details of various AM techniques based on ASTM guidelines Discusses many AM applications with suitable illustrations Includes recent trends in the field of AM Covers engineering materials utilized as raw materials in AM Compares AM techniques with different traditional manufacturing methods

Download or read book Antenna in Package Technology and Applications written by Duixian Liu and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to antenna design, manufacturing processes, antenna integration, and packaging Antenna-in-Package Technology and Applications contains an introduction to the history of AiP technology. It explores antennas and packages, thermal analysis and design, as well as measurement setups and methods for AiP technology. The authors—well-known experts on the topic—explain why microstrip patch antennas are the most popular and describe the myriad constraints of packaging, such as electrical performance, thermo-mechanical reliability, compactness, manufacturability, and cost. The book includes information on how the choice of interconnects is governed by JEDEC for automatic assembly and describes low-temperature co-fired ceramic, high-density interconnects, fan-out wafer level packaging–based AiP, and 3D-printing-based AiP. The book includes a detailed discussion of the surface laminar circuit–based AiP designs for large-scale mm-wave phased arrays for 94-GHz imagers and 28-GHz 5G New Radios. Additionally, the book includes information on 3D AiP for sensor nodes, near-field wireless power transfer, and IoT applications. This important book: • Includes a brief history of antenna-in-package technology • Describes package structures widely used in AiP, such as ball grid array (BGA) and quad flat no-leads (QFN) • Explores the concepts, materials and processes, designs, and verifications with special consideration for excellent electrical, mechanical, and thermal performance Written for students in electrical engineering, professors, researchers, and RF engineers, Antenna-in-Package Technology and Applications offers a guide to material selection for antennas and packages, antenna design with manufacturing processes and packaging constraints, antenna integration, and packaging.