Download or read book Additive Manufacturing of Biopolymers written by Mehrshad Mehrpouya and published by Elsevier. This book was released on 2023-04-21 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Biopolymers: Materials, Printing Techniques, and Applications describes various biopolymers that are currently used in additive manufacturing technologies and identifies the challenges/limitations in the materials and printing processes. The book provides basic knowledge and advanced details about 3D printing techniques and the applicable biopolymers as well as the latest updates on materials and techniques for 3D printing of biopolymers. Each chapter dedicates a section to future trends and perspectives in additive manufacturing of biopolymers from the use of biopolymers and new techniques point-of-view. Provides an overview of biopolymer materials in terms of physicochemical properties that can be applied for the additive manufacturing process Gives a comprehensive overview of applicable 3D printing techniques for biopolymers and their benefits and challenges Explains in-depth chemical and physical properties of fabricated products for various applications Offers a future vision in the development of both material and printing techniques in regard to biopolymers as well as new aspects in modeling and artificial intelligence issues
Download or read book 3D Printing with Biopolymers on Textile Knitted Structures written by Aliea Mohammad and published by GRIN Verlag. This book was released on 2016-09-20 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Paper (postgraduate) from the year 2016 in the subject Engineering - Chemical Engineering, Niederrhein University of Applied Sciences Mönchengladbach (Forschungsinstitut für Textil und Bekleidung), language: English, abstract: Additive manufacturing or 3D printing is the process of turning digital files into physical, three dimensional objects. This is realized using additive processes, which imply successfully laying down very thin layers of material until the object is finalized. Since invented, it has been used for the purpose of rapid prototyping, and has evolved into a next generation manufacturing technology with the potential of allowing rapid, on site and on demand production of parts and end-products, signaling the beginning of a third industrial revolution. The aim of this research is to successfully print different three dimensional structures on a variety of knitted fabrics, in order to observe the properties and the behavior of the biopolymers in these circumstances. To do so, 3 separate objects in form of thin rectangles were 3D printed on 7 different surfaces, which were later subject of a peel test that measured the adherence of the polymer to the knitted structure.
Download or read book Sustainable Polymers for Additive Manufacturing written by Antonio Paesano and published by . This book was released on 2021-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book provides the latest technical information on sustainable materials used in additive manufacturing (AM). Topics covered include an up-to-date and extensive overview of raw materials, their chemistry, and functional properties of their commercial versions; a description of the relevant AM processes, products, applications, and limitations; and a forecast of sustainable materials used in AM, their properties, and applications in the near future provided by experts in the field. Data included are relative to current commercial products and are presented in easy to read tables and charts"--
Download or read book Biopolymers and Composites written by Samy A. Madbouly and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-10-04 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing interest in replacing petroleum-based products by inexpensive, renewable, natural materials will have a significant impact on sustainability, environment, and the polymer industry. This book provides scientists a useful framework to help take advantage of the latest research conducted in this rapidly advancing field enabling them to develop and commercialize their own products quickly and more successfully.
Download or read book Additive Manufacturing of Polymers for Tissue Engineering written by Atul Babbar and published by CRC Press. This book was released on 2022-09-27 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of additive manufacturing and tissue engineering in the fields of science and technology enables the manufacturing of biocompatible, customized, reliable, and cost-effective parts, restoring the functionality of a failed human body part. This book offers a platform for recent breakthroughs in additive manufacturing related to biomedical applications. This book highlights some of the top innovations and advances in additive manufacturing and processing technologies that are the future of the manufacturing industry while also presenting current challenges and opportunities regarding the choice of material. This book includes areas of applications such as surgical guides, tissue regeneration, artificial scaffolds, implants, and drug delivery and release. Throughout the book, an emphasis is placed on rapid tooling for engineering applications. Additive Manufacturing of Polymers for Tissue Engineering: Fundamentals, Applications, and Future Advancements acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing and development plans.
Download or read book Biopolymers for Medical Applications written by Juan M. Ruso and published by CRC Press. This book was released on 2017-02-17 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an experimental and computational account of the applications of biopolymers in the field of medicine. Biopolymers are macromolecules produced by living systems, such as proteins, polypeptides, nucleic acids, and polysaccharides. Their advantages over polymers produced using synthetic chemistry include: diversity, abundance, relatively low cost, and sustainability. This book explains techniques for the production of different biodevices, such as scaffolds, hydrogels, functional nanoparticles, microcapsules, and nanocapsules. Furthermore, developments in nanodrug delivery, gene therapy, and tissue engineering are described.
Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject Includes case studies of innovative additive manufacturing practices from industry
Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.
Download or read book Development of a Biodegradable Biopolymer from Renewable Natural Resources Suitable for Additive Manufacturing and Bone Tissue Engineering written by and published by . This book was released on 2020 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing -- Biomaterial -- Bone regeneration -- Chitosan -- Poly(vinyl acetate) -- Scaffolds -- Tissue engineering.
Download or read book Additive Manufacturing in Multidisciplinary Cooperation and Production written by Igor Drstvensek and published by Springer Nature. This book was released on 2023-10-27 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book publishes the latest findings and ideas in the field of additive manufacturing presented by authors from prominent institutions around the world at the iCAT 2023 conference. The authors address various technological and medical aspects, ranging from materials science to the specific behaviour of the technology under different working conditions. The book is divided into four sections, three of which are dedicated to the purely technological aspects of additive manufacturing, covering metal processes, polymer processes and simulation. The fourth part of the book is dedicated to the medical applications of additive manufacturing, covering areas ranging from orthopaedic surgeries to materials used in medical AM.Overall, the book provides insight into the current state of the science and applications of additive manufacturing.
Download or read book Sustainable Biopolymer Composites written by Deepak Verma and published by Woodhead Publishing. This book was released on 2021-09-15 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Biopolymer Composites: Biocompatibility, Self-healing, Modeling, Repair and Recyclability focuses on sustainable polymer composites also referred to as bio- composites. Vital aspects such as biodegradability, biocompatibility, repair and recyclability are discussed in detail. In addition, complexities like rapid and scalable processing, onsite repair, and minimal environmental effects are also covered along with the appropriateness of advanced polymer composites for structural applications in automotive, aviation and marine industries. This book will be an indispensable resource for scientists, engineers, physicists and chemists who are interested in the preparation, applications and repair analysis of bio-based composites and nano-composites for different types of applications. The composites repair process is extremely complex, hence it is essential to have a comprehensive understanding of damage mechanisms to apply the most suitable repair technique. Damage assessment using onsite inspection, e.g., NDT, THz techniques and the automated repair process for reliability and repeatability, are vital parameters when executing bonded composite repair. Furthermore, overall integrity and structural health monitoring of composites repair is also necessary. Features detailed information on damage detection, failure analysis and repair of advanced bio-polymer composites Emphasizes biocompatibility, degradation and recyclability of these materials Features key chapters on molecular dynamics, multi-scale modeling and self-healing Presents a roadmap for materials selection, processing and industrial utilization for a broad range of applications
Download or read book Biopolymers and Their Industrial Applications written by Sabu Thomas and published by Elsevier. This book was released on 2020-10-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers and Their Industrial Applications: From Plant, Animal, and Marine Sources to Functional Products is a detailed guide to the use of biopolymers for advanced applications across a range of key industries. In terms of processing and cost, bio-based polymers are becoming increasingly viable for an ever-broadening range of novel industrial applications. The book begins with an overview of biopolymers, explaining resources, demands, sustainability, life cycle assessment (LCA) modeling and simulation, and classifications. Further in-depth chapters explore the latest techniques and methodologies for isolation and physicochemical characterization, materials selection, and processing for blends and composites. Chapters 6 to 14 each focus on the preparation and applications of biopolymers in a specific industrial area, including food science and nutraceuticals, medicine and pharmaceuticals, textiles, cosmeceutical, packaging, adhesives and automotive, 3D printing, super capacitor and energy storage devices, and environmental applications. The final chapter compares and analyzes biopolymers alongside synthetic polymers, also offering valuable insight into social, economic, and environmental aspects. This is an essential resource for those seeking to understand, research, or utilize biopolymers in industrial applications. This includes researchers, scientists, and advanced students working in biopolymers, polymer science, polymer chemistry, biomaterials, materials science, nanotechnology, composites, and biotechnology. This is a highly valuable book for scientists, R&D professionals, designers, and engineers across multiple industries and disciplines, who are looking to utilize biopolymers for components and products. Introduces a broad range of industrial application areas, including food, medicine, textiles, cosmetics, packaging, automotive, 3D printing, energy, and more Offers an industry-oriented approach, addressing challenges and explaining the preparation and application of biopolymers for functional products and parts Considers important factors such as resources, classification, sustainability, and life cycle assessment (LCA) modeling and simulation Compares and analyzes biopolymers alongside synthetic polymers, also offering valuable insight into social, economic, and environmental aspects
Download or read book Polymer Based Additive Manufacturing written by Declan M. Devine and published by Springer Nature. This book was released on 2019-09-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to give readers a basic understanding of commonly used additive manufacturing techniques as well as the tools to fully utilise the strengths of additive manufacturing through the modelling and design phase all the way through to post processing. Guidelines for 3D-printed biomedical implants are also provided. Current biomedical applications of 3D printing are discussed, including indirect applications in the rapid manufacture of prototype tooling and direct applications in the orthopaedics, cardiovascular, drug delivery, ear-nose-throat, and tissue engineering fields. Polymer-Based Additive Manufacturing: Biomedical Applications is an ideal resource for students, researchers, and those working in industry seeking to better understand the medical applications of additive manufacturing.
Download or read book Biopolymer Based Composites written by Sougata Jana and published by Woodhead Publishing. This book was released on 2017-06-15 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer-Based Composites: Drug Delivery and Biomedical Applications presents a comprehensive review on recent developments in biopolymer-based composites and their use in drug delivery and biomedical applications. The information contained in this book is critical for the more efficient use of composites, as detailed up-to-date information is a pre-requirement. The information provided brings cutting-edge developments to the attention of young investigators to encourage further advances in the field of bio-composite research. Currently, biopolymers are being investigated for the design of various drug delivery and biomedical devices due to their non-toxic, biodegradable and biocompatible nature. Mostly, biopolymer-based solid orals, gels, hydrogel beads, and transdermal matrices have been designed in order to control drug/protein release in simulated bio-fluids. Presents the most updated information in the field of pharmaceutical and biological sciences Contains color figures and illustrations to help users understand key topics Useful guide for young researchers working towards new innovations Includes chapters covered by eminent scientists in the field
Download or read book Handbook of Polymer Nanocomposites for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2020-10-29 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.770 pages Approx.770 pages
Download or read book Bone Tissue Engineering written by Jeffrey O. Hollinger and published by CRC Press. This book was released on 2004-10-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on bone biology, Bone Tissue Engineering integrates basic sciences with tissue engineering. It includes contributions from world-renowned researchers and clinicians who discuss key topics such as different models and approaches to bone tissue engineering, as well as exciting clinical applications for patients. Divided into four sections, t
Download or read book Additive Manufacturing for Polymers written by Jianlei Wang and published by Frontiers Media SA. This book was released on 2023-10-16 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing, also known as additive manufacturing, is a manufacturing process that connects materials layer by layer to produce a solid object based on networked digital model files. Advantages of 3D printing over traditional manufacturing include less material consumption, lower costs, faster production process, customizable degrees of freedom and complexity of geometric shapes. The traditional manufacturing of a functional structural part often requires multiple independent process steps, while 3D printing can fabricate the same part in one step, enabling small batch production and customization of personalized products. Due to the diversity of materials available, 3D printing for polymer can be used to create lightweight complex structures in aerospace, models of architectural structures, art reproductions, and biological tissues and organs.
