Download or read book Additive Manufacturing Change Management written by David M. Dietrich and published by CRC Press. This book was released on 2019-02-04 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) has altered manufacturing as we know it, with shortened development time, increased performance, and reduced product costs. Executive management in industry are bombarded by marketing from their competitors showcasing design solutions leveraged through AM. Therefore, executive management ask their project management teams to figure out how to utilize AM within their own company. Clueless on how to approach the problem, managers start learning about AM from experts and become overwhelmed at the highly technical information. Unlike other AM books that focus on the technical output of AM technology, this new book focuses solely on the managerial implementation. Features Presents the impacts of AM technology Provides engaging, practical, and entertaining "war stories" from the front line of AM industrialization Describes in detail, the significant hurdles in AM certification and implementation Offers templates of proven change management best practices, as practical solutions Omits the technical verbiage that gets in the way of management understanding how the process is implemented

Download or read book Additive Manufacturing Change Management written by David M. Dietrich and published by CRC Press. This book was released on 2019-02-04 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) has altered manufacturing as we know it, with shortened development time, increased performance, and reduced product costs. Executive management in industry are bombarded by marketing from their competitors showcasing design solutions leveraged through AM. Therefore, executive management ask their project management teams to figure out how to utilize AM within their own company. Clueless on how to approach the problem, managers start learning about AM from experts and become overwhelmed at the highly technical information. Unlike other AM books that focus on the technical output of AM technology, this new book focuses solely on the managerial implementation. Features Presents the impacts of AM technology Provides engaging, practical, and entertaining "war stories" from the front line of AM industrialization Describes in detail, the significant hurdles in AM certification and implementation Offers templates of proven change management best practices, as practical solutions Omits the technical verbiage that gets in the way of management understanding how the process is implemented

Download or read book The Management of Additive Manufacturing written by Mojtaba Khorram Niaki and published by Springer. This book was released on 2017-12-26 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to additive technology and its application in different business sectors. It explores the fundamental impact additive has on technology, particularly on operations, innovation, supply chains, the environment and customer relations. Subsequently, on the basis of a broad survey of the best technology adopters, it offers advice on how to enhance business value by implementing the technology in different industrial and commercial environments. Additive manufacturing (AM) is a new area of manufacturing that has already brought about phenomenal changes to industry and business models. It affects nearly all aspects of the managerial and organizational thinking that was applied to conventional manufacturing. Currently, the technology is being adopted in manufacturing areas that involve high-value products with complex geometries, and small to medium production volumes. It boosts the productivity of new product development processes by slashing costs, reducing time and promoting creativity and innovativeness. Further, it shrinks supply chains by bringing firms closer to their customers. This unique book offers abundant empirical and practical evidence confirming the value of this new technology.

Download or read book Product Lifecycle Management Leveraging Digital Twins Circular Economy and Knowledge Management for Sustainable Innovation written by Christophe Danjou and published by Springer Nature. This book was released on with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Additive Manufacturing for the Practitioner written by Sheku Kamara and published by John Wiley & Sons. This book was released on 2021-04-21 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Additive Manufacturing for the Practitioner Discover how to shift from traditional to additive manufacturing processes with this core resource from industry leaders Fundamentals of Additive Manufacturing for the Practitioner delivers a vital examination of the methods and techniques needed to transition from traditional to additive manufacturing. The book explains how traditional manufacturing work roles change as various industries move into additive manufacturing and describes the flow of the typical production process in additive manufacturing. Detailed explorations of the processes, inputs, machine and build preparation, post-processing, and best practices are included, as well as real-world examples of the principles discussed within. Every chapter includes a problems and opportunities section that prompts readers to apply the book’s techniques to their own work. Diagrams and tables are distributed liberally throughout the work to present concepts visually, and key options and decisions are highlighted to assist the reader in understanding how additive manufacturing changes traditional workflows. Readers will also benefit from the inclusion of A thorough introduction on how to move into additive manufacturing, including the identification of a manufacturing opportunity and its characteristics An exploration of how to determine if additive manufacturing is the right solution, with descriptions of the origins of additive manufacturing and the current state of the technology An examination of the materials used in additive manufacturing, including polymers, composites, metals, plasters, and biomaterials A discussion of choosing an additive manufacturing technology and process Perfect for mechanical engineers, manufacturing professionals, technicians, and designers new to additive manufacturing, Fundamentals of Additive Manufacturing for the Practitioner will also earn a place in the libraries of technical, vocational, and continuing education audiences seeking to improve their skills with additive manufacturing workflows.

Download or read book Standards Quality Control and Measurement Sciences in 3D Printing and Additive Manufacturing written by Chee Kai Chua and published by Academic Press. This book was released on 2017-06-03 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standards, Quality Control and Measurement Sciences in 3D Printing and Additive Manufacturing addresses the critical elements of the standards and measurement sciences in 3D printing to help readers design and create safe, reliable products of high quality. With 3D printing revolutionizing the process of manufacturing in a wide range of products, the book takes key features into account, such as design and fabrication and the current state and future potentials and opportunities in the field. In addition, the book provides an in-depth analysis on the importance of standards and measurement sciences. With self-test exercises at the end of each chapter, readers can improve their ability to take up challenges and become proficient in a number of topics related to 3D printing, including software usage, materials specification and benchmarking. Helps the reader understand the quality framework tailored for 3D printing processes Explains data format and process control in 3D printing Provides an overview of different materials and characterization methods Covers benchmarking and metrology for 3D printing

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Manufacturing Change Management a Process Based Approach for the Management of Manufacturing Changes written by Jonas Koch and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book Predictive Theoretical and Computational Approaches for Additive Manufacturing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-12-21 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have great potential for promoting transformative research in many fields across the vast spectrum of engineering and materials science. AM is one of the leading forms of advanced manufacturing which enables direct computer-aided design (CAD) to part production without part-specific tooling. In October 2015 the National Academies of Sciences, Engineering, and Medicine convened a workshop of experts from diverse communities to examine predictive theoretical and computational approaches for various AM technologies. While experimental workshops in AM have been held in the past, this workshop uniquely focused on theoretical and computational approaches and involved areas such as simulation-based engineering and science, integrated computational materials engineering, mechanics, materials science, manufacturing processes, and other specialized areas. This publication summarizes the presentations and discussions from the workshop.

Download or read book Additive and Subtractive Manufacturing written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) and subtractive manufacturing (SM) offer numerous advantages in the production of single and multiple components. They provide incomparable design independence and are used to fabricate products in several industries, e.g.: aeronautic, automotive, biomedical, etc. The book presents recent results of processes including 3D printing, SLS (selective laser sintering), EBM (electron beam melting) and Precise Cutting and Drilling.

Download or read book Advances in Manufacturing Production Management and Process Control written by Beata Mrugalska and published by Springer Nature. This book was released on 2020-06-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in the broadly defined field of advanced manufacturing and process control. It reports on cutting-edge strategies for sustainable production and product life cycle management, and on a variety of people-centered issues in the design, operation and management of manufacturing systems and processes. Further, it presents digital modeling systems and additive manufacturing technologies, including advanced applications for different purposes, and discusses in detail the implementation of and challenges imposed by 3D printing technologies. Based on three AHFE 2020 Conferences (the AHFE 2020 Virtual Conference on Human Aspects of Advanced Manufacturing, the AHFE 2020 Virtual Conference on Advanced Production Management and Process Control and the AHFE 2020 Virtual Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, the book merges ergonomics research, design applications, and up-to-date analyses of various engineering processes. It brings together experimental studies, theoretical methods and best practices, highlights future trends and suggests directions for further technological developments and the improved integration of technologies and humans in the manufacturing industry.

Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject Includes case studies of innovative additive manufacturing practices from industry

Download or read book Additive Manufacturing Applications for Metals and Composites written by Balasubramanian, K.R. and published by IGI Global. This book was released on 2020-06-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) of metals and composites using laser energy, direct energy deposition, electron beam methods, and wire arc melting have recently gained importance due to their advantages in fabricating the complex structure. Today, it has become possible to reliably manufacture dense parts with certain AM processes for many materials, including steels, aluminum and titanium alloys, superalloys, metal-based composites, and ceramic matrix composites. In the near future, the AM material variety will most likely grow further, with high-performance materials such as intermetallic compounds and high entropy alloys already under investigation. Additive Manufacturing Applications for Metals and Composites is a pivotal reference source that provides vital research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the manufacturing process, and the resulted microstructures and properties, as well as the relationship between these factors. While highlighting topics such as numerical modeling, intermetallic compounds, and statistical techniques, this publication is ideally designed for students, engineers, researchers, manufacturers, technologists, academicians, practitioners, scholars, and educators.

Download or read book Springer Handbook of Additive Manufacturing written by Eujin Pei and published by Springer Nature. This book was released on 2023-11-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is the ultimate definitive guide that covers key fundamentals and advanced applications for Additive Manufacturing. The Handbook has been structured into seven sections, comprising of a thorough Introduction to Additive Manufacturing; Design and Data; Processes; Materials; Post-processing, Testing and Inspection; Education and Training; and Applications and Case Study Examples. The general principles and functional relationships are described in each chapter and supplemented with industry use cases. The aim of this book is to help designers, engineers and manufacturers understand the state-of-the-art developments in the field of Additive Manufacturing. Although this book is primarily aimed at students and educators, it will appeal to researchers and industrial professionals working with technology users, machine or component manufacturers to help them make better decisions in the implementation of Additive Manufacturing and its applications.

Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.

Download or read book Technical Economic and Societal Effects of Manufacturing 4 0 written by Mikael Collan and published by Palgrave Macmillan. This book was released on 2020-10-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is among the first cross-disciplinary works about Manufacturing 4.0. It includes chapters about the technical, the economic, and the social aspects of this important phenomenon. Together the material presented allows the reader to develop a holistic picture of where the manufacturing industry and the parts of the society that depend on it may be going in the future. Manufacturing 4.0 is not only a technical change, nor is it a purely technically driven change, but it is a societal change that has the potential to disrupt the way societies are constructed both in the positive and in the negative. This book will be of interest to scholars researching manufacturing, technological innovation, innovation management and industry 4.0.