Download or read book Adaptive Sliding Mode Control with Application to a MEMS Vibratory Gyroscope written by Juntao Fei and published by . This book was released on 2007 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Gyroscopes are commonly used sensors for measuring angular velocity in many areas of applications such as navigation, homing, and control stabilization. Vibratory gyroscopes are the devices that transfer energy from one axis to the other through Coriolis forces. Fabrication imperfections result in some cross stiffness and cross damping effects that may hinder the measurement of angular velocity of MEMS gyroscope. Other noise sources such as thermal, mechanical noise also affect the performance. The angular velocity measurement and minimization of the cross coupling between two axes are challenging problems in the control of vibrating gyroscopes. This dissertation develops adaptive sliding mode control strategies for a MEMS z-axis gyroscope. The proposed adaptive sliding mode controllers for MEMS z-axis gyroscope make real-time estimates of the angular velocity as well as all unknown gyroscope parameters including coupling stiffness and damping parameters. Therefore, fabrication imperfection and time varying noise and disturbance can be compensated for. These estimates are updated using the tracking error between the reference model trajectory and mass' real trajectory. The reference model trajectory is designed to satisfy the persistence of excitation condition to enable parameter estimates to converge to their true values. The indirect adaptive sliding mode controller and direct adaptive sliding mode controller with proportional and integral sliding surface are proposed for MEMS gyroscope. In the presence of unmeasured velocity states, an adaptive sliding mode controller with a sliding mode observer that can reconstruct the unmeasured states is developed to estimate the angular velocity and the linear damping and stiffness coefficients of the gyroscope in real time despite parameter variations and external disturbance. Moreover, the adaptive sliding mode control for two axes angular sensor is extended to triaxial angular sensor and a novel concept for an adaptively controlled triaxial angular velocity sensor device that is able to detect rotation in the three orthogonal axes, using a single vibrating mass is proposed. The numerical simulations of MEMS gyroscope show the effectiveness of all the proposed adaptive sliding mode control schemes. It is shown that the proposed adaptive sliding mode control schemes offer several advantages such as consistent estimates of gyroscope parameters including angular velocity and large robustness to parameter variations and disturbance."--Abstract.

Download or read book Adaptive sliding mode control of a Mems vibratory gyroscope written by Juntao Fei and published by . This book was released on 2008 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sliding Mode Control and the Least Squares Estimation of Angular Rate for a MEMS Vibratory Gyroscope written by Sreeram Reddy Tadvai and published by . This book was released on 2004 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MEMS NEMS Sensors written by Goutam Koley and published by MDPI. This book was released on 2019-11-20 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the ever-expanding applications of micro/nano-electromechanical systems (NEMS/MEMS) as sensors and actuators, interest in their development has rapidly expanded over the past decade. Encompassing various excitation and readout schemes, the MEMS/NEMS devices transduce physical parameter changes, such as temperature, mass or stress, caused by changes in desired measurands, to electrical signals that can be further processed. Some common examples of NEMS/MEMS sensors include pressure sensors, accelerometers, magnetic field sensors, microphones, radiation sensors, and particulate matter sensors.

Download or read book Adaptive Control Strategies for MEMS Gyroscopes written by Sungsu Park and published by . This book was released on 2000 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Design Engineering Division written by and published by American Society of Mechanical Engineers. This book was released on 2007 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Systems Engineering written by V. H. Saran and published by Springer Nature. This book was released on 2021-01-23 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the 43rd National Systems Conference on Innovative and Emerging Trends in Engineering Systems (NSC 2019) held at the Indian Institute of Technology, Roorkee, India. The contents cover latest research in the highly multidisciplinary field of systems engineering, and discusses its various aspects like systems design, dynamics, analysis, modeling and simulation. Some of the topics covered include computing systems, consciousness systems, electrical systems, energy systems, manufacturing systems, mechanical systems, literary systems, social systems, and quantum and nano systems. Given the scope of the contents, this book will be useful for researchers and professionals from diverse engineering and management background.

Download or read book MEMS Vibratory Gyroscopes written by Cenk Acar and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS Vibratory Gyroscopes provides a solid foundation in the theory and fundamental operational principles of micromachined vibratory rate gyroscopes, and introduces structural designs that provide inherent robustness against structural and environmental variations. In the first part, the dynamics of the vibratory gyroscope sensing element is developed, common micro-fabrication processes and methods commonly used in inertial sensor production are summarized, design of mechanical structures for both linear and torsional gyroscopes are presented, and electrical actuation and detection methods are discussed along with details on experimental characterization of MEMS gyroscopes. In the second part, design concepts that improve robustness of the micromachined sensing element are introduced, supported by constructive computational examples and experimental results illustrating the material.

Download or read book Whole Angle MEMS Gyroscopes written by Doruk Senkal and published by John Wiley & Sons. This book was released on 2020-05-11 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the mathematical framework, technical language, and control systems know-how needed to design, develop, and instrument micro-scale whole-angle gyroscopes This comprehensive reference covers the technical fundamentals, mathematical framework, and common control strategies for degenerate mode gyroscopes, which are used in high-precision navigation applications. It explores various energy loss mechanisms and the effect of structural imperfections, along with requirements for continuous rate integrating gyroscope operation. It also provides information on the fabrication of MEMS whole-angle gyroscopes and the best methods of sustaining oscillations. Whole-Angle Gyroscopes: Challenges and Opportunities begins with a brief overview of the two main types of Coriolis Vibratory Gyroscopes (CVGs): non-degenerate mode gyroscopes and degenerate mode gyroscopes. It then introduces readers to the Foucault Pendulum analogy and a review of MEMS whole angle mode gyroscope development. Chapters cover: dynamics of whole-angle coriolis vibratory gyroscopes; fabrication of whole-angle coriolis vibratory gyroscopes; energy loss mechanisms of coriolis vibratory gyroscopes; and control strategies for whole-angle coriolis vibratory gyro- scopes. The book finishes with a chapter on conventionally machined micro-machined gyroscopes, followed by one on micro-wineglass gyroscopes. In addition, the book: Lowers barrier to entry for aspiring scientists and engineers by providing a solid understanding of the fundamentals and control strategies of degenerate mode gyroscopes Organizes mode-matched mechanical gyroscopes based on three classifications: wine-glass, ring/disk, and mass spring mechanical elements Includes case studies on conventionally micro-machined and 3-D micro-machined gyroscopes Whole-Angle Gyroscopes is an ideal book for researchers, scientists, engineers, and college/graduate students involved in the technology. It will also be of great benefit to engineers in control systems, MEMS production, electronics, and semi-conductors who work with inertial sensors.

Download or read book Sliding Mode Control SMC written by David T. Ellis and published by . This book was released on 2015 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding mode control was first introduced in the 1950s. It is a nonlinear control technique with many unique properties. In this book, different aspects of SMC are explored. Chapters include new developments in research on a sliding mode governor for hydropower plants; integral sliding mode control (I-SMC) for a variable speed wind turbine system and a I-SMC method for load frequency control (LFC) of nonlinear power systems with wind turbines; the control of a stand-alone photovoltaic (PV) system; leader-follower-based formation control of a group of mobile robots; the application of Takagi-Sugeno (T-S) fuzzy model in coordinated control of multiple robots system; an induction motor speed control using the nonsingular terminal sliding-mode control method; adaptive nonsingular terminal sliding mode (NTSM) tracking control scheme based on backstepping design presented for Micro-Electro-Mechanical Systems (MEMS) vibratory gryoscopes; and a hybrid actuator and its control using a cascade sliding mode technique.

Download or read book New Trends in Robot Control written by Jawhar Ghommam and published by Springer Nature. This book was released on 2020-02-13 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents solutions to control problems in a number of robotic systems and provides a wealth of worked-out examples with full analytical and numerical details, graphically illustrated to aid in reader comprehension. It also presents relevant studies on and applications of robotic system control approaches, as well as the latest findings from interdisciplinary theoretical studies. Featuring chapters on advanced control (fuzzy, neural, backstepping, sliding mode, adaptive, predictive, diagnosis, and fault-tolerant control), the book will equip readers to easily tailor the techniques to their own applications. Accordingly, it offers a valuable resource for researchers, engineers, and students in the field of robotic systems.

Download or read book Sliding Mode Control written by Christopher Edwards and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sliding Mode Control Using MATLAB written by Jinkun Liu and published by Academic Press. This book was released on 2017-05-25 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding Mode Control Using MATLAB provides many sliding mode controller design examples, along with simulation examples and MATLAB® programs. Following the review of sliding mode control, the book includes sliding mode control for continuous systems, robust adaptive sliding mode control, sliding mode control for underactuated systems, backstepping, and dynamic surface sliding mode control, sliding mode control based on filter and observer, sliding mode control for discrete systems, fuzzy sliding mode control, neural network sliding mode control, and sliding mode control for robot manipulators. The contents of each chapter are independent, providing readers with information they can use for their own needs. It is suitable for the readers who work on mechanical and electronic engineering, electrical automation engineering, etc., and can also be used as a teaching reference for universities. Provides many sliding mode controller design examples to help readers solve their research and design problems Includes various, implementable, robust sliding mode control design solutions from engineering applications Provides the simulation examples and MATLAB programs for each sliding mode control algorithm

Download or read book Adaptive Control for Conventional Modes of Operation of MEMS Gyroscopes written by Sungsu Park and published by . This book was released on 2002 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Control System for a Vibrational MEMS Gyroscope with Time varying Rotation Rates written by Lili Dong and published by . This book was released on 2005 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sliding Mode Control SMC written by David T. Ellis and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding mode control was first introduced in the 1950s. It is a nonlinear control technique with many unique properties. In this book, different aspects of SMC are explored. Chapters include new developments in research on a sliding mode governor for hydropower plants; integral sliding mode control (I-SMC) for a variable speed wind turbine system and a I-SMC method for load frequency control (LFC) of nonlinear power systems with wind turbines; the control of a stand-alone photovoltaic (PV) system; leader-follower-based formation control of a group of mobile robots; the application of Takagi-Sugeno (T-S) fuzzy model in coordinated control of multiple robots system; an induction motor speed control using the nonsingular terminal sliding-mode control method; adaptive nonsingular terminal sliding mode (NTSM) tracking control scheme based on backstepping design presented for Micro-Electro-Mechanical Systems (MEMS) vibratory gryoscopes; and a hybrid actuator and its control using a cascade sliding mode technique.

Download or read book Linear Algebra Theory and Applications written by Kenneth Kuttler and published by The Saylor Foundation. This book was released on 2012-01-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book on linear algebra and matrix theory. While it is self contained, it will work best for those who have already had some exposure to linear algebra. It is also assumed that the reader has had calculus. Some optional topics require more analysis than this, however. I think that the subject of linear algebra is likely the most significant topic discussed in undergraduate mathematics courses. Part of the reason for this is its usefulness in unifying so many different topics. Linear algebra is essential in analysis, applied math, and even in theoretical mathematics. This is the point of view of this book, more than a presentation of linear algebra for its own sake. This is why there are numerous applications, some fairly unusual.