Download or read book Active Structural Control with Stable Fuzzy PID Techniques written by Wen Yu and published by Springer. This book was released on 2015-12-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed discussion of intelligent techniques to measure the displacement of buildings when they are subjected to vibration. It shows how these techniques are used to control active devices that can reduce vibration 60–80% more effectively than widely used passive anti-seismic systems. After introducing various structural control devices and building-modeling and active structural control methods, the authors propose offset cancellation and high-pass filtering techniques to solve some common problems of building-displacement measurement using accelerometers. The most popular control algorithms in industrial settings, PD/PID controllers, are then analyzed and then combined with fuzzy compensation. The stability of this combination is proven with standard weight-training algorithms. These conditions provide explicit methods for selecting PD/PID controllers. Finally, fuzzy-logic and sliding-mode control are applied to the control of wind-induced vibration. The methods described are supported by reports of experimental studies on a two-story building prototype. This book is a valuable resource for academic researchers interested in the effects of control and mechatronic devices within buildings, or those studying the principles of vibration reduction. Practicing engineers working on the design and construction of any sort of high-rise or vulnerable building and concerned with the effects of either wind or seismic disturbances benefit from the efficacy of the methods proposed.
Download or read book Uncertainty Modeling in Vibration Control and Fuzzy Analysis of Structural Systems written by Bilal M. Ayyub and published by World Scientific. This book was released on 1997 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the current state of uncertainty modeling in vibration, control, and fuzzy analysis of structural and mechanical systems. It is a coherent compendium written by leading experts and offers the reader a sampling of exciting research areas in several fast-growing branches in this field. Uncertainty modeling and analysis are becoming an integral part of system definition and modeling in many fields. The book consists of ten chapters that report the work of researchers, scientists and engineers on theoretical developments and diversified applications in engineering systems. They deal with modeling for vibration, control, and fuzzy analysis of structural and mechanical systems under uncertain conditions. The book designed for readers who are familiar with the fundamentals and wish to study a particular topic or use the book as an authoritative reference. It gives readers a sophisticated toolbox for tackling modeling problems in mechanical and structural systems in real-world situations. The book is part of a series on Stability, Vibration and Control of Structures, and provides vital information in these areas.
Download or read book Design Optimization of Active and Passive Structural Control Systems written by Nikos D. Lagaros and published by . This book was released on 2013 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the design optimization of active and passive control systems including earthquake engineering and tuned mass damper research topics and their link"--
Download or read book Design Optimization of Active and Passive Structural Control Systems written by Lagaros, Nikos D. and published by IGI Global. This book was released on 2012-08-31 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: A typical engineering task during the development of any system is, among others, to improve its performance in terms of cost and response. Improvements can be achieved either by simply using design rules based on the experience or in an automated way by using optimization methods that lead to optimum designs. Design Optimization of Active and Passive Structural Control Systems includes Earthquake Engineering and Tuned Mass Damper research topics into a volume taking advantage of the connecting link between them, which is optimization. This is a publication addressing the design optimization of active and passive control systems. This title is perfect for engineers, professionals, professors, and students alike, providing cutting edge research and applications.
Download or read book Passive and Active Structural Vibration Control in Civil Engineering written by T.T. Soong and published by Springer. This book was released on 2014-05-04 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Base isolation, passive energy dissipation and active control represent three innovative technologies for protection of structures under environmental loads. Increasingly, they are being applied to the design of new structures or to the retrofit of existing structures against wind, earthquakes and other external loads. This book, with contributions from leading researchers from Japan, Europe, and the United States, presents a balanced view of current research and world-wide development in this exciting and fast expanding field. Basic principles as well as practical design and implementational issues associated with the application of base isolation systems and passive and active control devices to civil engineering structures are carefully addressed. Examples of structural applications are presented and extensively discussed.
Download or read book Active Control of Bidirectional Structural Vibration written by Wen Yu and published by Springer Nature. This book was released on 2020-06-05 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on safeguarding civil structures and residents from natural hazards such as earthquakes through the use of active control. It proposes novel proportional-derivative (PD) and proportional-integral-derivative (PID) controllers, as well as discrete-time sliding mode controllers (DSMCs) for the vibration control of structures involving nonlinearities. Fuzzy logic techniques are used to compensate for nonlinearities. The first part of the book addresses modelling and feedback control in inelastic structures and presents a design for PD/PID controllers. In the second part, classical PD/PID and type-2 fuzzy control techniques are combined to compensate for uncertainties in the structures of buildings. The methodology for tuning the gains of PD/PID is obtained using Lyapunov stability theory, and the system’s stability is verified. Lastly, the book puts forward a DSMC design that does not require system parameters, allowing it to be more flexibly applied. All program codes used in the paper are presented in a MATLAB®/Simulink® environment. Given its scope, the book will be of interest to mechanical and civil engineers, and to advanced undergraduate and graduate engineering students in the areas of structural engineering, structural vibration, and advanced control.
Download or read book Advances in Structural Engineering Optimization written by Sinan Melih Nigdeli and published by Springer Nature. This book was released on 2020-12-04 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an up-to-date source for computation applications of optimization, prediction via artificial intelligence methods, and evaluation of metaheuristic algorithm with different structural applications. As the current interest of researcher, metaheuristic algorithms are a high interest topic area since advance and non-optimized problems via mathematical methods are challenged by the development of advance and modified algorithms. The artificial intelligence (AI) area is also important in predicting optimum results by skipping long iterative optimization processes. The machine learning used in generation of AI models also needs optimum results of metaheuristic-based approaches. This book is a great source to researcher, graduate students, and bachelor students who gain project about structural optimization. Differently from the academic use, the chapter that emphasizes different scopes and methods can take the interest and help engineer working in design and production of structural engineering projects.
Download or read book Structural Control Proceedings Of The First European Conference written by A Baratta and published by World Scientific. This book was released on 1997-03-18 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural control offers opportunities to design new structures and to retrofit existing structures by the application of counter-forces, smart materials, frictional devices, etc., instead of just increasing the strength of the structure at greater cost.The Association for the Control of Structures (ACS) is promoting in Europe the development of this new technology in architectural design and infrastructure renewal and rehabilitation. The First European Conference on Structural Control was organized as one of the major initiatives toward this objective.
Download or read book Neural Fuzzy Control Systems With Structure And Parameter Learning written by Chin-teng Lin and published by World Scientific Publishing Company. This book was released on 1994-02-08 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: A general neural-network-based connectionist model, called Fuzzy Neural Network (FNN), is proposed in this book for the realization of a fuzzy logic control and decision system. The FNN is a feedforward multi-layered network which integrates the basic elements and functions of a traditional fuzzy logic controller into a connectionist structure which has distributed learning abilities.In order to set up this proposed FNN, the author recommends two complementary structure/parameter learning algorithms: a two-phase hybrid learning algorithm and an on-line supervised structure/parameter learning algorithm.Both of these learning algorithms require exact supervised training data for learning. In some real-time applications, exact training data may be expensive or even impossible to get. To solve this reinforcement learning problem for real-world applications, a Reinforcement Fuzzy Neural Network (RFNN) is further proposed. Computer simulation examples are presented to illustrate the performance and applicability of the proposed FNN, RFNN and their associated learning algorithms for various applications.
Download or read book Structural Control for Civil and Infrastructure Engineering written by Fabio Casciati and published by World Scientific. This book was released on 2001 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural control represents a high technology proposal for civil engineering innovation. This book collects the invited papers presented at the 3rd International Workshop on Structural Control. The geographical coverage and the high quality of the invited speaker's contributions make the book a unique update in the areas of intelligent structures, structural control and smart materials for civil and infrastructure engineers. Contents: An Identification Algorithm for Feedback Active Control (N D Anh); Application of Control Techniques to Masonry and Monumental Constructions (A Baratta et al.); Monitoring of Infrastructures in the Marine Environment (A Del Grosso); Health Monitoring and Optimum Maintenance Programs for Structures in Seismic Zones (L Esteva & E Heredia-Zavoni); Outline of Safety Evaluation of Structural Response-Control Buildings and Smart Structural Systems as Future Trends (K Yoshikazu & T Hiroyuki); Recent Developments in Smart Structures Research in India (S Narayanan & V Balamurugan); Perspective of Application of Active Damping of Cable Structures (A Preumont & F Bossens); Parametric and Nonparametric Adaptive Identification of Nonlinear Structural Systems (A W Smyth et al.); Active Control Requirements in Railway Projects (H Wenzel); and other papers. Readership: Civil engineers and scientists working in the areas of intelligent systems and smart materials.
Download or read book Intelligent Computational Paradigms in Earthquake Engineering written by Nikos D. Lagaros and published by IGI Global. This book was released on 2007-01-01 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book contains contributions that cover a wide spectrum of very important real-world engineering problems, and explores the implementation of neural networks for the representation of structural responses in earthquake engineering. It assesses the efficiency of seismic design procedures and describes the latest findings in intelligent optimal control systems and their applications in structural engineering"--Provided by publisher.
Download or read book Active Vibration Control and Stability Analysis of Flexible Beam Systems written by Wei He and published by Springer. This book was released on 2018-12-17 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theoretical explorations of several fundamental problems in the dynamics and control of flexible beam systems. By integrating fresh concepts and results to form a systematic approach to control, it establishes a basic theoretical framework. It includes typical control design examples verified using MATLAB simulation, which in turn illustrate the successful practical applications of active vibration control theory for flexible beam systems. The book is primarily intended for researchers and engineers in the control system and mechanical engineering community, offering them a unique resource.
Download or read book Advanced Research on Industry Information System and Material Engineering IISME2011 written by Helen Zhang and published by Trans Tech Publications Ltd. This book was released on 2011-02-21 with total page 2281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected,peer reviewed papers from the 2011 International Conference on Industry, Information System and Material Engineering (IISME 2011), April 16-17, 2011, Guangzhou, China
Download or read book Advanced Numerical Simulations in Mechanical Engineering written by Kumar, Ashwani and published by IGI Global. This book was released on 2017-12-01 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in information processing systems have driven the advancement of numerical simulations in engineering. New models and simulations enable better solutions for problem-solving and overall process improvement. Advanced Numerical Simulations in Mechanical Engineering is a pivotal reference source for the latest research findings on advanced modelling and simulation method adopted in mechanical and mechatronics engineering. Featuring extensive coverage on relevant areas such as fuzzy logic controllers, finite element analysis, and analytical models, this publication is an ideal resource for students, professional engineers, and researchers interested in the application of numerical simulations in mechanical engineering.
Download or read book EASEC16 written by Chien Ming Wang and published by Springer Nature. This book was released on 2020-12-22 with total page 2093 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from The 16th East Asian-Pacific Conference on Structural Engineering and Construction, 2019, held in Brisbane, Australia. It provides a forum for professional engineers, academics, researchers and contractors to present recent research and developments in structural engineering and construction.
Download or read book Vibration Control written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibrations are a part of our environment and daily life. Many of them are useful and are needed for many purposes, one of the best example being the hearing system. Nevertheless, vibrations are often undesirable and have to be suppressed or reduced, as they may be harmful to structures by generating damages or compromise the comfort of users through noise generation of mechanical wave transmission to the body. the purpose of this book is to present basic and advanced methods for efficiently controlling the vibrations and limiting their effects. Open-access publishing is an extraordinary opportunity for a wide dissemination of high quality research. This book is not an exception to this, and I am proud to introduce the works performed by experts from all over the world.
Download or read book Proceedings of 6th International Conference on Harmony Search Soft Computing and Applications written by Sinan Melih Nigdeli and published by Springer Nature. This book was released on 2020-11-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different aspects of real-world applications of optimization algorithms. It provides insights from the Sixth International Conference on Harmony Search, Soft Computing and Applications held at Istanbul University, Turkey, in July 2020. Harmony Search (HS) is one of the most popular metaheuristic algorithms, developed in 2001 by Prof. Joong Hoon Kim and Prof. Zong Woo Geem, that mimics the improvisation process of jazz musicians to seek the best harmony. The book consists of research articles on novel and newly proposed optimization algorithms; the theoretical study of nature-inspired optimization algorithms; numerically established results of nature-inspired optimization algorithms; and real-world applications of optimization algorithms and synthetic benchmarking of optimization algorithms.
