Download or read book Active Sites of Polymerization written by Gennady Zaikov and published by CRC Press. This book was released on 2005-03-28 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monograph is intended to systematize data on active sites and their kinetic and stereospecific heterogeneity (polysite phenomenon) in olefin and diene monomer ion, ion-coordination and complex radical polymerization processes. Questions of molecular-mass distribution of polymers obtained by ion and ion-coordination polymerization methods are discussed together with composition and stereo regularity distribution of olefin copolymers. Data on the influence of transition and non-transition metal origin and their ligand ambience, conditions of catalytic system preparation and polymerization are shown. Various assessment methods of polymerization active site distribution by kinetic activity and stereospecific action are considered. In particular, an assessment method for kinetic activity distribution at ion-coordination diene polymerization is described, mathematical simulation parameters for polymerization processes are shown, taking into account the polysite structure of catalytic systems. Of special attention are geometrical and electron structure of active sites in the ion-coordination polymerization by the quantum chemistry method, interrelation between reactivity of some types of active sites and stereospecificity of their action in diene polymerization. The importance of ratio between specific time elementary act duration at the diene injection, coordinated on an active site, and time of propagating macrochain end unit existence in the s-state at polydiene microstructure formation is indicated. Questions of the polysite mechanism occurrence in complex radical polymerization processes are discussed. A possibility for polymerization to proceed in both free-radical and complex related chain propagation sites is shown.

Download or read book Stereoselective Polymerization with Single Site Catalysts written by Lisa S. Baugh and published by CRC Press. This book was released on 2007-11-29 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: New synthetic techniques allow chemists to modify polymer microstructures more precisely than ever, making it possible to design materials that meet increasingly demanding performance requirements. Written and edited by experts in the field, Stereoselective Polymerization with Single-Site Catalysts reviews how the relative stereochemistry of

Download or read book Metalorganic Catalysts for Synthesis and Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: 45 years after the discovery of transition metals and organometallics as cocatalysts for the polymerization of olefins and for organic synthesis, these compounds have not lost their fascination. The birthday of Karl Ziegler, the great pioneer in this metalorganic catalysis, is now 100 years ago. Polyolefins and polydienes produced by Ziegler-Natta catalysis are the most important plastics and elastomers. New impulses for the polymerization of olefins have been brought about by highly active metallocenes and other single site catalysts. Just by changing the ligands of the organometallic compounds, the structure of the polymers produced can be tailored in a wide manner. In invited lectures and posters, relevant aspects of the metalorganic catalysts for synthesis and polymerization are discussed in this book. This includes mechanism and kinetics, stereochemistry, material properties, and industrial applications.

Download or read book Optically Active Polymers written by E. Sélégny and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first four volumes of the series on 'Charged and Reactive Polymers' have been devoted to polymers in solution (Voh. I and II) or in gel and membrane forms (Vols. III and IV). In correlation with charges, other physical or chemical properties of macro molecules have been considered. Understanding of charge and hydrophobic effects is equally important for synthetic and biopolymers or their systems. Optically Active Polymers are related to problems of the same class, since optical activity is an inherent property of both natural macromolecules as well as a great variety of polymers synthesized in the Jast twenty years. Optical activity is a physical spectral property of chiral matter caused by asymmetrical configurations, conformations and structures which have no plane and no center of symmetry and consequently have two mirror image enantiomeric forms of inverse optical rotation. The racemic mixture of chiral enantiomers is optically inactive. The most common form of optical activity was first measured at a constant wavelength by the angle of rotation of linearly polarized light. More recently the measurements have been extended to the entire range of visible and attainable ultraviolet regions where electronic transitions are observed, giving rise to the ORD technique (Optical Rotatory Dispersion). The Cotton effects appear in the region of optically active absorption bands; outside of these bands the plain curve spectrum is also dependent on all the electronic transitions of the chromophores.

Download or read book Ziegler Natta Catalysts Polymerizations written by John Jr. Boor and published by Elsevier. This book was released on 2012-12-02 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ziegler-Natta Catalysts and Polymerizations reviews the general aspects of Ziegler-Natta catalysts and polymerizations of olefins, dienes, and many other types of monomers. Topics covered include the physical state of the polymer during polymerization; modification of Ziegler-Natta catalysts by third components; and termination of polymer chain growth. The oxidation state of catalysts and active centers is also discussed, along with copolymerizations and block polymerizations. This book is comprised of 23 chapters and begins with an overview of Ziegler-Natta catalysts and polymerizations, their historical origins, scientific and commercial importance, and major advances in polymer science. The next chapter focuses on definitions and stereochemistry of Ziegler-Natta catalysts, together with analytical methods used to identify and quantitatively measure their structures. Some of the polymers produced commercially with Ziegler-Natta catalysts are considered. The discussion then turns to mechanisms for initiating and propagating olefins; mechanisms for stereochemical control of conjugated and nonconjugated dienes; and the basic kinetic parameters that characterize Ziegler-Natta polymerizations. This monograph is written especially for chemistry and engineering graduate students and for industrial chemists, engineers, and managers who may become involved in a Ziegler-Natta problem.

Download or read book Transition Metals and Organometallics as Catalysts for Olefin Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 30 years after the discovery of transition metals and organometal lics as catalysts for olefin polymerization these catalysts did not have lost their fascination. Since 1953 when Karl Ziegler has discovered the catalytic polymerization of ethylene leading to plastically formable polymers which are mechanically stable up to temperatures of about 100°C, synthetic polymers and rubbers have made their way right into private houses. This discovery has been a main impetus for the fast growing production of plastics. The stereoselective poly merization of propylene and other long-chain a-olefins first detected by Giulio Natta leads to an even broadened field of applications. Another enforcing factor were the developments of Standard Oil of Indiana and Phillipps Petroleum Company who engaged in the polymerization of a-olefins supported molybdenum, cobalt and later on chromium catalysts which clearly indicates the wide variety of suitable systems. This kind of research acknowledged merit when in 1963 the Nobel prize of chemistry was awarded to Ziegler and Natta. Although to a great extent there is a technical application for these catalysts, up to now the nature of the active centres and many reaction mechanisms are not completely known.

Download or read book Alkene Polymerization Reactions with Transition Metal Catalysts written by Yury Kissin and published by Elsevier. This book was released on 2008-03-10 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 30 years, the field of alkene polymerization over transition metal catalysts underwent several major changes:1. The list of commercial heterogeneous Ziegler-Natta catalysts for the synthesis of polyethylene and stereoregular polyolefins was completely renewed affording an unprecedented degree of control over the polymer structure.2. Research devoted to metallocene and other soluble transition-metal catalysis has vastly expanded and has shifted toward complexes of transition metals with multidentate ligands.3. Recent developments in gel permeation chromatography, temperature-rising fractionation, and crystallization fractionation provided the first reliable information about differences between various active centers in transition-metal catalysts.4. A rapid development of high-resolution 13C NMR spectroscopy resulted in greatly expanded understanding of the chemical and steric features of polyolefins and alkene copolymers. These developments require a new review of all aspects of alkene polymerization reactions with transition-metal catalysts. The first chapter in the book is an introductory text for researchers who are entering the field. It describes the basic principles of polymerization reactions with transition-metal catalysts, the types of catalysts, and commercially manufactured polyolefins. The next chapter addresses the principal issue of alkene polymerization catalysis: the existence of catalyst systems with single and multiple types of active centers. The subsequent chapters are devoted to chemistry and stereochemistry of elemental reaction steps, structures of catalyst precursors and reactions leading to the formation of active centers, kinetics of polymerization reactions, and their mechanisms.The book describes the latest commercial polymerization catalysts for the synthesis of polyethylenes and polypropylene The book provides a detailed description of the multi-center nature of commercial Ziegler-Natta catalysts. The book devotes specialized chapters to the most important aspects of transition metal polymerization catalysts: the reactions leading to the formation of active centers, the chemistry and stereochemistry of elemental polymerization steps, reaction kinetics, and the polymerization mechanism. The book contains an introductory chapter for researchers who are entering the field of polymerization catalysis. It describes the basic principles of polymerization reactions with transition-metal catalysts and the types of commercially manufactured polyolefins and copolymersThe book contains over 2000 references, the most recent up to end of 2006.

Download or read book Catalytic Olefin Polymerization written by T. Keii and published by Elsevier. This book was released on 1990-09-12 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent development of a new generation of Ziegler-Natta Catalysts using either magnesium dichloride as carrier or methylaluminoxane as cocatalyst has markedly stimulated the research activity in the field of olefin polymerization. These discoveries have not only yielded economical processes for polyolefin production but also opened the way to a new generation of novel polymers. Moreover, the nature of active species is being clarified well by the effort to simplify catalyst systems. The present volume includes 38 papers from the 31 lectures and 18 posters presented at the symposium on `Recent Developments in Olefin Polymerization Catalysts', which covered the following topics: Overview of super-active homogeneous and heterogeneous catalysts, kinetic profile of olefin polymerization including copolymerization, characterization of catalysts and polymers, methods for the determination of active center concentration, role of Lewis bases on the catalysts isospecificity, polymerization mechanisms, and synthetic pathways for functionalized polyolefins. The contents are well balanced between fundamental research and application as well as between homogeneous and heterogeneous catalyst systems.

Download or read book Catalysis by Polymer Immobilized Metal Complexes written by Anatoly D. Pomogailo and published by CRC Press. This book was released on 2020-08-18 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals with a new and promising field developed during the last two decades on the boundary between homogeneous and heterogeneous catalysis. This book presents general information on catalysis for a wide range of organic reactions, e.g., hydrogenation and oxidation reactions, and polymerization transformations. Special attention is paid to electro- and photochemical stimulation of catalytic processes in the presence of immobilized metal complexes. Other topics covered are the quantitative data on the comparison of catalyses by mobile and immobilized metal complexes; main factors affecting the activity of these catalytic systems and methods of optimizing their control; and specific problems of catalysis by fixed complexes (e.g., ligand exchange and electron transfer in metal polymer systems, macromolecular effects and polyfunctional catalysis).

Download or read book Polyolefins 50 years after Ziegler and Natta I written by Walter Kaminsky and published by Springer. This book was released on 2013-12-19 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.

Download or read book Polymer Modification written by John Meister and published by CRC Press. This book was released on 2000-07-25 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Describes new modification methods and applications for natural, synthetic, thermoplastic, and thermoset polymers that result from economic forces, commercial processes, and the latest research and development. Features chemical and physical technologies such as sulfonation, alkylation, acid/base hydrolysis, hydrogenation, stress orienting, annealing, crystallization, and more."

Download or read book 10th International Conference on Theory and Application of Soft Computing Computing with Words and Perceptions ICSCCW 2019 written by Rafik A. Aliev and published by Springer Nature. This book was released on 2019-11-19 with total page 997 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 10th Conference on Theory and Applications of Soft Computing, Computing with Words and Perceptions, ICSCCW 2019, held in Prague, Czech Republic, on August 27–28, 2019. It includes contributions from diverse areas of soft computing and computing with words, such as uncertain computation, decision-making under imperfect information, neuro-fuzzy approaches, deep learning, natural language processing, and others. The topics of the papers include theory and applications of soft computing, information granulation, computing with words, computing with perceptions, image processing with soft computing, probabilistic reasoning, intelligent control, machine learning, fuzzy logic in data analytics and data mining, evolutionary computing, chaotic systems, soft computing in business, economics and finance, fuzzy logic and soft computing in earth sciences, fuzzy logic and soft computing in engineering, fuzzy logic and soft computing in material sciences, soft computing in medicine, biomedical engineering, and pharmaceutical sciences. Showcasing new ideas in the field of theories of soft computing and computing with words and their applications in economics, business, industry, education, medicine, earth sciences, and other fields, it promotes the development and implementation of these paradigms in various real-world contexts. This book is a useful guide for academics, practitioners and graduates.

Download or read book Sulfur Containing Polymers written by Xing-Hong Zhang and published by John Wiley & Sons. This book was released on 2021-03-23 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-have resource to the booming field of sulfur-containing polymers Sulfur-Containing Polymers is a state-of-the-art text that offers a synthesis of the various sulfur-containing polymers from low-cost sulfur resources such as elemental sulfur, carbon disulfide (CS2), carbonyl sulfide (COS) and mercaptan. With contributions from noted experts on the topic, the book presents an in-depth understanding of the mechanisms related to the synthesis of sulfur-containing polymers. The book also includes a review of the various types of sulfur-containing polymers, such as: poly(thioester)s, poly(thioether)s and poly(thiocarbonate)s and poly(thiourethane)s with linear or hyperbranched (dendrimer) architectures. The expert authors provide the fundamentals on the structure-property relationship and applications of sulfur-containing polymers. Designed to be beneficial for both research and application-oriented chemists and engineers, the book contains the most recent research and developments of sulfur-containing polymers. This important book: Offers the first comprehensive handbook on the topic Contains state-of-the-art research on synthesis of sulfur containing polymers from low-cost sulfur-containing compounds Examines the synthesis, mechanism, structure properties, and applications of various types of sulful-containing polymers Includes contributions from well-known experts Written for polymer chemists, materials scientists, chemists in industry, biochemists, and chemical engineers, Sulfur-Containing Polymers offers a groundbreaking text to the field with inforamtion on the most recent research.

Download or read book Introduction to Polymers Third Edition written by Robert J. Young and published by CRC Press. This book was released on 2011-06-27 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, Introduction to Polymers, Third Edition presents the science underpinning the synthesis, characterization and properties of polymers. The material has been completely reorganized and expanded to include important new topics and provide a coherent platform for teaching and learning the fundamental aspects of contemporary polymer science. New to the Third Edition Part I This first part covers newer developments in polymer synthesis, including ‘living’ radical polymerization, catalytic chain transfer and free-radical ring-opening polymerization, along with strategies for the synthesis of conducting polymers, dendrimers, hyperbranched polymers and block copolymers. Polymerization mechanisms have been made more explicit by showing electron movements. Part II In this part, the authors have added new topics on diffusion, solution behaviour of polyelectrolytes and field-flow fractionation methods. They also greatly expand coverage of spectroscopy, including UV visible, Raman, infrared, NMR and mass spectroscopy. In addition, the Flory–Huggins theory for polymer solutions and their phase separation is treated more rigorously. Part III A completely new, major topic in this section is multicomponent polymer systems. The book also incorporates new material on macromolecular dynamics and reptation, liquid crystalline polymers and thermal analysis. Many of the diagrams and micrographs have been updated to more clearly highlight features of polymer morphology. Part IV The last part of the book contains major new sections on polymer composites, such as nanocomposites, and electrical properties of polymers. Other new topics include effects of chain entanglements, swelling of elastomers, polymer fibres, impact behaviour and ductile fracture. Coverage of rubber-toughening of brittle plastics has also been revised and expanded. While this edition adds many new concepts, the philosophy of the book remains unchanged. Largely self-contained, the text fully derives most equations and cross-references topics between chapters where appropriate. Each chapter not only includes a list of further reading to help readers expand their knowledge of the subject but also provides problem sets to test understanding, particularly of numerical aspects.

Download or read book Handbook of Transition Metal Polymerization Catalysts written by Ray Hoff and published by John Wiley & Sons. This book was released on 2018-04-20 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including recent advances and historically important catalysts, this book overviews methods for developing and applying polymerization catalysts – dealing with polymerization catalysts that afford commercially acceptable high yields of polymer with respect to catalyst mass or productivity. • Contains the valuable data needed to reproduce syntheses or use the catalyst for new applications • Offers a guide to the design and synthesis of catalysts, and their applications in synthesis of polymers • Includes the information essential for choosing the appropriate reactions to maximize yield of polymer synthesized • Presents new chapters on vanadium catalysts, Ziegler catalysts, laboratory homopolymerization, and copolymerization

Download or read book Compendium of Polymer Terminology and Nomenclature written by Richard G Jones and published by Royal Society of Chemistry. This book was released on 2009-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUPAC system of polymer nomenclature has aided the generation of unambiguous names that re ect the historical development of chemistry. However, the explosion in the circulation of information and the globalization of human activities mean that it is now necessary to have a common language for use in legal situations, patents, export-import regulations, and environmental health and safety information. Rather than recommending a ‘unique name’ for each structure, rules have been developed for assigning ‘preferred IUPAC names’, while continuing to allow alternatives in order to preserve the diversity and adaptability of nomenclature. Compendium of Polymer Terminology and Nomenclature is the only publication to collect the most important work on this subject into a single volume. It serves as a handy compendium for scientists and removes the need for time consuming literature searches. One of a series issued by the International Union of Pure and Applied Chemistry (IUPAC), it covers the terminology used in many and varied aspects of polymer science as well as the nomenclature of several di erent types of polymer including regular and irregular single-strand organic polymers, copolymers and regular double-strand (ladder and spiro) organic polymers.

Download or read book Polysaccharide based Nano Biocarrier in Drug Delivery written by Tapan Kumar Giri and published by CRC Press. This book was released on 2018-09-03 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various fundamental aspects of polysaccharide based nano-biocarrier drug delivery systems and its application in the delivery of small molecules, proteins, peptides, oligonucleotides and genes. It also discusses advances in drug delivery systems in treatment of cancer, cardiovascular, pulmonary, and infectious diseases.