Download or read book Active Load Control Using Microtabs written by Dora Te-Lun Yen and published by . This book was released on 2001 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Final Report 02 ERD 056 Active Load Control Mitigation Using Microtabs written by and published by . This book was released on 2003 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: With public concern over the security and reliability of our existing electricity infrastructure and the resurgence of wind energy, the wind industry offers an immediate, first point of entry for the application and demonstration of an active load control technology. An innovative microtab approach is being investigated and demonstrated for active aerodynamic load control applications under the mid-year LDRD (June-Sept. 2002) effort. With many of these million dollar turbines failing at only half the design lifespans, conventional techniques for stiffening rotors, enlarging generators and gearboxes, and reinforcing towers are insufficient to accommodate the demands for bigger, taller and more powerful turbines. The DOE through the National Renewable Energy Laboratory (NREL) supports R & D efforts to develop lighter, more efficient and longer lasting wind turbines and advance turbine components. However, as wind turbine systems continue to increase in size and complexity, fundamental research and technology development has not kept pace with needs. New technologies to increase turbine life spans and to reduce costs are needed to realize wind electricity generation potentials. It is becoming quite evident that without a better understanding of static and dynamic response to normal and abnormal operating loads coupled with sophisticated flow analysis and control techniques, large turbine operating life and component life will be severely limited. Promising technologies include active load control and load alleviation systems to mitigate peak loads from damaging key components. This project addresses science and engineering challenges of developing enabling technologies for active load control for turbine applications using an innovative, translational microtab approach. Figure 1.1 illustrates the microtabs as applied on a wind turbine system. Extending wind turbine operating life is a crucial component for reducing the cost of wind-generated electricity, enabling wind energy market penetration and improving the reliability of the nation's renewable electrical generation infrastructure. This project also provides enabling technologies for improving turbine efficiency and durability to support the DOE and NNSA missions of providing energy security and reliability without contributing to greenhouse gas emissions and for decreasing dependence on foreign fuel sources. In addition to wind generator applications, the realization of a ''smart'' controllable structure for load control using the microtab approach has the potential to revolutionize design of other complex systems. Driven by cost and safety, both passive and active flow control for steady and unsteady conditions have been actively investigated by NASA, DARPA, DOE and other research institutions for application on rotorcraft, UAVs, marine vessels and wind turbine applications. The potential to obtain revolutionary advances in aerodynamic hydrodynamic performance, safety, maneuverability and service life by decreasing loads is an attractive prospect across many industries.
Download or read book Active Load Control Techniques for Wind Turbines Focusing on Mechanical Design of a Microtab System written by Scott Jeremy Johnson and published by . This book was released on 2008 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unsteady Computational Investigations of Deploying Load control Microtabs written by Raymond Chow and published by . This book was released on 2006 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Energy Systems written by John Dalsgaard Sørensen and published by Elsevier. This book was released on 2010-12-20 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large-scale wind power generation is one of the fastest developing sources of renewable energy and already makes a substantial contribution to power grids in many countries worldwide. With technology maturing, the challenge is now to increase penetration, and optimise the design, construction and performance of wind energy systems. Fundamental issues of safety and reliability are paramount in this drive to increase capacity and efficiency.Wind energy systems: Optimising design and construction for safe and reliable operation provides a comprehensive review of the latest developments in the design, construction and operation of large-scale wind energy systems, including in offshore and other problematic environments.Part one provides detailed coverage of wind resource assessment and siting methods relevant to wind turbine and wind farm planning, as well as aeroelastics, aerodynamics, and fatigue loading that affect the safety and reliability of wind energy systems. This coverage is extended in part two, where the design and development of individual components is considered in depth, from wind turbine rotors to drive train and control systems, and on to tower design and construction. Part three explores operation and maintenance issues, such as reliability and maintainability strategies and condition monitoring systems, before discussing performance assessment and optimisation routes for wind energy systems in low wind speed environments and cold climates. Part four reviews offshore wind energy systems development, from the impact of environmental loads such as wind, waves and ice, to site specific construction and integrated wind farm planning, and of course the critical issues and strategies for offshore operation and maintenance.With its distinguished editors and international teams of contributors, Wind energy systems is a standard reference for wind power engineers, technicians and manufacturers, as well as researchers and academics involved in this expanding field. Reviews the latest developments in the design, construction and operation of large-scale wind energy systems Offers detailed coverage of wind resource assessment and siting methods relevant to wind turbine and wind farm planning Explores operation and maintenance issues, such as reliability and maintainability strategies and condition monitoring systems
Download or read book Experimental Investigation Into the Effectiveness of a Microtab Aerodynamic Load Control System written by Jonathon Paul Baker and published by . This book was released on 2005 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotating Machinery Structural Health Monitoring Shock and Vibration Volume 5 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-03-24 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Volume 5 Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the fifth volume of six from the Conference, brings together 35 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Rotating Machinery, Structural Health Monitoring, as well as Shock and Vibration, along with other structural engineering areas.
Download or read book Wind Turbine Control Systems written by David A. Rivkin and published by Jones & Bartlett Publishers. This book was released on 2013 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part Of The Art And Science Of Wind Power Series The Wind Energy Industry Is A Key Player In The Booming Alternative Energy Market, And Job Opportunities Abound In This Rapidly-Growing Field. Wind Turbine Control Systems Provides Critical Resources For Experienced And Novice Learners Alike. The Text Provides An In-Depth Survey Of Wind Turbine Control Systems. It Covers Key Wind-Energy Control Strategies And Offers A Comprehensive Overview Of The Ways In Which Wind Is Generated, Converted, And Controlled. About The Series According To Estimates From The American Wind Energy Association, Approximately 85,000 Americans Are Employed In The Rapidly Expanding Wind Energy Industry. The Art And Science Of Wind Power Series Was Developed To Address A Critical Gap In Educational Resources Directed Toward The Development Of Skilled Workers In This Industry. Each Title Uses A Systems-Based Perspective To Provide Students With The Resources To Develop Creative Solutions To Challenges As Well As Systems-Based Critical Thinking Skills. No Other Series As Comprehensively Addresses Key Issues For Novice And Expert Learners Alike.
Download or read book Wind Energy Systems written by Mario Garcia-Sanz and published by CRC Press. This book was released on 2012-02-02 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the latest developments in the field, Wind Energy Systems: Control Engineering Design offers a novel take on advanced control engineering design techniques for wind turbine applications. The book introduces concurrent quantitative engineering techniques for the design of highly efficient and reliable controllers, which can be used to solve the most critical problems of multi-megawatt wind energy systems. This book is based on the authors’ experience during the last two decades designing commercial multi-megawatt wind turbines and control systems for industry leaders, including NASA and the European Space Agency. This work is their response to the urgent need for a truly reliable concurrent engineering methodology for the design of advanced control systems. Outlining a roadmap for such a coordinated architecture, the authors consider the links between all aspects of a multi-megawatt wind energy project, in which the wind turbine and the control system must be cooperatively designed to achieve an optimized, reliable, and successful system. Look inside for information about the QFT Control Toolbox for Matlab, the software developed by the author to facilitate the QFT robust control design (see also the link at codypower.com). The textbook’s big-picture insights can help students and practicing engineers control and optimize a wind energy system, in which large, flexible, aerodynamic structures are connected to a demanding variable electrical grid and work automatically under very turbulent and unpredictable environmental conditions. The book covers topics including robust QFT control, aerodynamics, mechanical and electrical dynamic modeling, economics, reliability, and efficiency. It also addresses standards, certification, implementation, grid integration, and power quality, as well as environmental and maintenance issues. To reinforce understanding, the authors present real examples of experimentation with commercial multi-megawatt direct-drive wind turbines, as well as on-shore, offshore, floating, and airborne wind turbine applications. They also offer a unique in-depth exploration of the quantitative feedback theory (QFT)—a proven, successful robust control technique for real-world applications—as well as advanced switching control techniques that help engineers exceed classical linear limitations.
Download or read book Smart Rotor Modeling written by Leonardo Bergami and published by Springer. This book was released on 2014-05-30 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart rotor is a wind turbine rotor that, through a combination of sensors, control units and actuators actively reduces the variation of the aerodynamic loads it has to withstand. Smart rotors feature promising load alleviation potential and might provide the technological breakthrough required by the next generation of large wind turbine rotors. The book presents the aero-servo-elastic model of a smart rotor with Adaptive Trailing Edge Flaps for active load alleviation and provides an insight on the rotor aerodynamic, structural and control modeling. A novel model for the unsteady aerodynamics of an air foil section with flap is presented and coupled with a multi-body structural representation. A smart rotor configuration is proposed, where the Adaptive Trailing Edge Flaps extend along the outer 20 % of the blade span. Linear Quadratic and Model Predictive algorithms are formulated to control the flap deflection. The potential of the smart rotor is finally confirmed by simulations in a turbulent wind field. A significant reduction of the fatigue loads on the blades is reported: the flaps, which cover no more than 1.5 % of the blade surface, reduce the fatigue load by 15 %; a combination of flap and individual pitch control allows for fatigue reductions up to 30 %.
Download or read book Advances in wind turbine blade design and materials written by C. Bak and published by Elsevier Inc. Chapters. This book was released on 2013-10-31 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter describes the process of aerodynamic rotor design for horizontal axis wind turbines. Apart from describing the state-of-the-art, it presents the mathematical models used, explains how airfoil and rotor control choice are decided and lists common design constraints. An example is used to illustrate the rotor design process, covering all the main aspects from choice of rotor size, airfoil types and number of blades to the exact aerodynamic shape of the blades. At the end of the chapter there is a summary of future trends and sources of further information.
Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Elsevier. This book was released on 2013-10-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy is gaining critical ground in the area of renewable energy, with wind energy being predicted to provide up to 8% of the world’s consumption of electricity by 2021. Advances in wind turbine blade design and materials reviews the design and functionality of wind turbine rotor blades as well as the requirements and challenges for composite materials used in both current and future designs of wind turbine blades. Part one outlines the challenges and developments in wind turbine blade design, including aerodynamic and aeroelastic design features, fatigue loads on wind turbine blades, and characteristics of wind turbine blade airfoils. Part two discusses the fatigue behavior of composite wind turbine blades, including the micromechanical modelling and fatigue life prediction of wind turbine blade composite materials, and the effects of resin and reinforcement variations on the fatigue resistance of wind turbine blades. The final part of the book describes advances in wind turbine blade materials, development and testing, including biobased composites, surface protection and coatings, structural performance testing and the design, manufacture and testing of small wind turbine blades. Advances in wind turbine blade design and materials offers a comprehensive review of the recent advances and challenges encountered in wind turbine blade materials and design, and will provide an invaluable reference for researchers and innovators in the field of wind energy production, including materials scientists and engineers, wind turbine blade manufacturers and maintenance technicians, scientists, researchers and academics. Reviews the design and functionality of wind turbine rotor blades Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades Provides an invaluable reference for researchers and innovators in the field of wind energy production
Download or read book Adaptive Structures and Material Systems written by and published by . This book was released on 2002 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2024-07-01 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIND ENERGY EXPLAINED Authoritative and bestselling textbook detailing the many aspects of using wind as an energy source Wind Energy Explained provides complete and comprehensive coverage on the topic of wind energy, starting with general concepts like the history of and rationale for wind energy and continuing into specific technological components and applications along with the new recent developments in the field. Divided into 16 chapters, this edition includes up-to-date data, diagrams, and illustrations, boasting an impressive 35% new material including new sections on metocean design conditions, wind turbine design, wind power plants and the electrical system, fixed and floating offshore wind turbines, project development, permitting and environmental risks and benefits, turbine installation, operation and maintenance, and high penetration wind energy systems and power-to-X. Wind Energy Explained also includes information on: Modern wind turbines, covering the design and their many components such as the rotor, drive train, and generator Aerodynamics of wind energy, covering one-dimensional momentum theory, the Betz limit, and ideal horizontal axis wind turbine with wake rotation Environmental external design conditions, such as wind, waves, currents, tides, salinity, floating ice, and many more Commonly used materials and components, such as steel, composites, copper, and concrete, plus machinery elements, such as shafts, couplings, bearings, and gears Modern design methods, including probabilistic design Environmental effects and mitigation strategies for wind project siting and the role of public engagement in the development process This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practicing engineers. It may also be used as a textbook resource for university level courses in wind energy, both introductory and advanced.
Download or read book Wind Turbine Power Optimization Technology written by Francesco Castellani and published by MDPI. This book was released on 2020-05-27 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind turbines are one of the most promising renewable energy technologies, and this motivates fertile research activity about developments in power optimization. This topic covers a wide range of aspects, from the research on aerodynamics and control design to the industrial applications about on-site wind turbine performance control and monitoring. This Special Issue collects seven research papers about several innovative aspects of the multi-faceted topic of wind turbine power optimization technology. The seven research papers deal respectively with the aerodynamic optimization of wind turbine blades through Gurney flaps; optimization of blade design for large offshore wind turbines; control design optimization of large wind turbines through the analysis of the competing objectives of energy yield maximization and fatigue loads minimization; design optimization of a tension leg platform for floating wind turbines; innovative methods for the assessment of wind turbine optimization technologies operating on site; optimization of multiple wake interactions modeling through the introduction of a mixing coefficient in the energy balance method; and optimization of the dynamic stall control of vertical-axis wind turbines through plasma actuators. This Special Issue presents remarkable research activities in the timely subject of wind turbine power optimization technology, covering various aspects. The collection is believed to be beneficial to readers and contribute to the wind power industry.
Download or read book Handbook of Wind Energy Aerodynamics written by Bernhard Stoevesandt and published by Springer Nature. This book was released on 2022-08-04 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides both a comprehensive overview and deep insights on the state-of-the-art methods used in wind turbine aerodynamics, as well as their advantages and limits. The focus of this work is specifically on wind turbines, where the aerodynamics are different from that of other fields due to the turbulent wind fields they face and the resultant differences in structural requirements. It gives a complete picture of research in the field, taking into account the different approaches which are applied. This book would be useful to professionals, academics, researchers and students working in the field.
Download or read book Iterative Learning Control Algorithms and Experimental Benchmarking written by Eric Rogers and published by John Wiley & Sons. This book was released on 2023-03-20 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iterative Learning CONTROL ALGORITHMS AND EXPERIMENTAL BENCHMARKING Iterative Learning Control Algorithms and Experimental Benchmarking Presents key cutting edge research into the use of iterative learning control The book discusses the main methods of iterative learning control (ILC) and its interactions, as well as comparator performance that is so crucial to the end user. The book provides integrated coverage of the major approaches to-date in terms of basic systems, theoretic properties, design algorithms, and experimentally measured performance, as well as the links with repetitive control and other related areas. Key features: Provides comprehensive coverage of the main approaches to ILC and their relative advantages and disadvantages. Presents the leading research in the field along with experimental benchmarking results. Demonstrates how this approach can extend out from engineering to other areas and, in particular, new research into its use in healthcare systems/rehabilitation robotics. The book is essential reading for researchers and graduate students in iterative learning control, repetitive control and, more generally, control systems theory and its applications.
