Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by IWA Publishing. This book was released on 2015-02-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.

Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing (International Water Assoc). This book was released on 1881 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.

Download or read book Environmental Engineering and Activated Sludge Processes written by Olga Sanchez and published by CRC Press. This book was released on 2016-06-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters. The activated sludge process is one of the most versatile and commonly used wastewater treatment systems in the world. In the past, when industrial wastewater treatment focused on removing biological oxygen demand and suspended solids, waste water plants needed different processes and technology. The shift to the activated sludge process means environmental engineers must build new treatment plants and retrofit old ones. In this compendium, the editor, an experienced and well-published scientist in the field, has brought together articles that relate to the new requirements.

Download or read book Modeling of Activated Sludge Systems written by Derin Orhon and published by CRC Press. This book was released on 1997-07-15 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated sludge is the most vital wastewater process today. Now, this recent book provides a comprehensive guide to the modelling and design of activated sludge systems. Written by two leaders in the wastewater field, the book presents extensive and up-to-date coverage of all areas in the activated sludge process microbiological basis, reactor kinetics, and design methodologies. The book is organized for easy reference and is ideal as a text or desktop guide.

Download or read book Activated Sludge Models ASM1 ASM2 ASM2d and ASM3 written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Wastewater Treatment by Activated Sludge written by Derin Orhon and published by IWA Publishing. This book was released on 2009-02-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial pollution is still a major concern and despite its significance, sound and systematic pollution control efforts are very poorly documented. The character and treatability of industrial wastewaters is highly variable and specific for each industrial activity. Biological treatment with activated sludge is the appropriate technology for industrial wastewaters from several major industrial sectors. Industrial Wastewater Treatment by Activated Sludge deals with the activated sludge treatment of industrial wastewaters by considering conceptual frameworks, methodologies and case studies, in a stepwise manner. The issues related to activated sludge treatment, such as biodegradability based characterization, modeling, assessment of stoichiometric and kinetic parameters and design, as well as the issues of industrial pollution control, e.g. in-plant control, effect of pretreatment, etc. are combined in a way to provide a comprehensive and information-rich view to the reader. By doing so, the book supplies an up-to-date reference for industrial wastewater experts and both graduate and undergraduate students. Industrial Wastewater Treatment by Activated Sludge provides a roadmap, describing the methodologies for the treatment of industrial wastewaters from several major sectors, based on a solid theoretical background. Up to now although valuable separate efforts both on activated sludge and industrial wastewater treatment have been presented, an integrated approach that is crucial to practice has not been available. This gap is filled by this book.

Download or read book Handbook of Biological Wastewater Treatment written by Adrianus van Haandel and published by IWA Publishing. This book was released on 2012-02-20 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. Authors: Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil and Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands

Download or read book Benchmarking of Control Strategies for Wastewater Treatment Plants written by Krist V. Gernaey and published by IWA Publishing. This book was released on 2014-09-15 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada

Download or read book Frontiers in Wastewater Treatment and Modelling written by Giorgio Mannina and published by Springer. This book was released on 2017-05-04 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and applications in the field of water management and environmental engineering as presented by leading researchers, engineers, life scientists and practitioners from around the world at the Frontiers International Conference on Wastewater Treatment (FICWTM), held in Palermo, Italy in May 2017. The topics covered are highly diverse and include the physical processes of mixing and dispersion, biological developments and mathematical modeling, such as computational fluid dynamics in wastewater, MBBR and hybrid systems, membrane bioreactors, anaerobic digestion, reduction of greenhouse gases from wastewater treatment plants, and energy optimization. The contributions amply demonstrate that the application of cost-effective technologies for waste treatment and control is urgently needed so as to implement appropriate regulatory measures that ensure pollution prevention and remediation, safeguard public health, and preserve the environment. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different water specialists.

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Activated Sludge Modelling Processes in Theory and Practice written by M. Henze and published by IWA Publishing (International Water Assoc). This book was released on 2002-05-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of models in activated sludge design and operation is increasing, with a similar trend seen in education. Starting with the original IAWPRC Activated Sludge Model no 1 (ASM1) and the subsequent ASM2 and ASM2D, the first generation of activated sludge models have played an important role in practice. With the development of the latest IWA Activated Sludge Model no 3 further progress has been made, and given the concurrent development of new methods for characterization of biomass and wastewater, this is a field of vigorous activity at present. The fifth Kollekolle Seminar brought together many of the world's leading experts on the activated sludge process, who have been working with activated sludge models in practice and research. The aim, as with previous seminars was to present the latest research findings, putting them into the proper perspective. From this high-quality programme 22 papers have been selected and revised to provide the best collection of papers on the state of the art of activated sludge modeling. Papers cover the following topics: modeling developments; wastewater and biomass characterization and parameter identification; modeling in practices.

Download or read book Biological Nitrogen Removal Activated Sludge Process in Warm Climates written by Cao Ye Shi and published by IWA Publishing. This book was released on 2008-04-14 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Offer: Cao Ye Shi Author Set - Buy all three books together and save a total £76! Many Biological Nitrogen Removal (BNR) activated sludge processes in warm climates are conservatively designed, because little systematic investigation has been carried out on the BNR activated sludge process in warm or tropical climates, although many studies under temperate climate conditions are available. This book covers a wide spectrum of mechanistic approaches to deal with BNR activated sludge related issues such as sewage and sludge characterization, dynamic performance of full-scale processes, laboratory simulation and modelling that leads to a mechanistic and more economic design. Recommendations on the operation, upgrading and design of BNR activated sludge process are formulated. This will significantly aid the promotion of nitrogen removal in wastewater treatment plants in warm or tropical climates, particularly in developing countries. The book has three purposes: to make recommendations for appropriate upgrading of existing activated sludge processes and assess the performance of the upgraded activated sludge processes; to explore the feasibility of employing laboratory-scale systems to simulate the performance of full-scale processes; and to use mathematical modelling calibrated with the measured data obtained from the laboratory-scale experimentation to study the performance and the design of full-scale processes. Reports are presented of comprehensive studies on: (i) on-site investigation of the activated sludge processes in three water reclamation plants (WRPs) in Singapore; (ii) laboratory-scale investigations to simulate the performance of full-scale activated sludge processes and to optimize the process design; and (iii) mathematical modelling and simulation with Activated Sludge Model No. 1 (ASM No. 1). Based on these detailed studies, guidelines on the operation, upgrading and design of the BNR activated sludge process in warm climates are presented. Results indicate that the laboratory-scale systems, designed based on the scale-down principles developed in this study and mathematic simulation with the model parameters calibrated by using the data obtained from the laboratory experiment, were able to describe the performance of the full-scale process.The applications of the approaches and principles are not limited to geographic locations and types of pollutants, and thus can reduce significantly the cost and time for the process development of the activated sludge process. This book will be an invaluable reference source for process and design engineers and consultants concerned with biological wastewater treatment as well as researchers in universities and research institutes.