Download or read book Activated Metals in Organic Synthesis written by P. Cintas and published by CRC Press. This book was released on 2020-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Metals in Organic Synthesis discusses fundamental principles of the generation of activated, highly reactive metals, and their applications in organic synthesis. Following an introductory chapter on basic forms of metals the chapters in Part 1 are devoted to common strategies utilized for the preparation of active metals. These strategies include vaporization and subsequent co-condensation of metal atoms, in addition to depassivating methods employed commonly in laboratory syntheses. Chapters in Part 2 discuss relevant organic transformations in which metal activation plays a crucial role. Specific topics covered include metal-induced reductive methods; pinacolic, Reformatsky-, and Barbier-type reactions; McMurry ketone-olefin coupling; and the Bernet-Vasella reaction. Each chapter is followed by literature citations ranging from specific references to significant reviews. Many structural formulas are provided, making it easy to follow each synthesis. The book will be an important reference for students, organic chemists, and researchers in all areas of organometallic chemistry.
Download or read book Activated Metals in Organic Synthesis written by P. Cintas and published by CRC Press. This book was released on 1993-05-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Metals in Organic Synthesis discusses fundamental principles of the generation of activated, highly reactive metals, and their applications in organic synthesis. Following an introductory chapter on basic forms of metals the chapters in Part 1 are devoted to common strategies utilized for the preparation of active metals. These strategies include vaporization and subsequent co-condensation of metal atoms, in addition to depassivating methods employed commonly in laboratory syntheses. Chapters in Part 2 discuss relevant organic transformations in which metal activation plays a crucial role. Specific topics covered include metal-induced reductive methods; pinacolic, Reformatsky-, and Barbier-type reactions; McMurry ketone-olefin coupling; and the Bernet-Vasella reaction. Each chapter is followed by literature citations ranging from specific references to significant reviews. Many structural formulas are provided, making it easy to follow each synthesis. The book will be an important reference for students, organic chemists, and researchers in all areas of organometallic chemistry.
Download or read book Active Metals written by Alois Fürstner and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactions with metals are ubiquitous in organic synthesis and, particularly in the last few years, a large repertoire of methods for the activation of metals and for their use in organic synthesis has been developed. In Active Metals, topics ranging from morphology of metal clusters and nanometallurgy to organometallic chemistry, catalysis and the use of activated metals in natural product synthesis are authoritatively discussed by leading experts in the field. Active Metals will allow you to fully benefit from the recent advances in the field by giving: * Detailed experimental procedures * Guidance on manipulation of active metals under inert atmosphere * Valuable information for planning syntheses * Extensive tables of typical conversions with yields * Critically selected, up-to-date references This handbook is a unique source of 'hands-on' information which will allow you to expand the scope of your research.
Download or read book Active Metals written by Alois Fürstner and published by Wiley-VCH. This book was released on 1996 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactions with metals are ubiquitous in organic synthesis and, particularly in the last few years, a large repertoire of methods for the activation of metals and for their use in organic synthesis has been developed. In Active Metals, topics ranging from morphology of metal clusters and nanometallurgy to organometallic chemistry, catalysis and the use of activated metals in natural product synthesis are authoritatively discussed by leading experts in the field. Active Metals will allow you to fully benefit from the recent advances in the field by giving: * Detailed experimental procedures * Guidance on manipulation of active metals under inert atmosphere * Valuable information for planning syntheses * Extensive tables of typical conversions with yields * Critically selected, up-to-date references This handbook is a unique source of 'hands-on' information which will allow you to expand the scope of your research.
Download or read book Transition Metals in the Synthesis of Complex Organic Molecules written by Louis S. Hegedus and published by University Science Books. This book was released on 1999 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition offers easy access to the field of organotransition metal chemistry. The book covers the basics of transition metal chemistry, giving a practical introduction to organotransition reaction mechanisms.
Download or read book Organic Reactions in the Presence of Activated Metals written by Christopher Playford Whittle and published by . This book was released on 1962 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Pathways for Organic Synthesis written by H.M. Colquhoun and published by Springer. This book was released on 1984-01-31 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continually growing contribution of transition metal chemistry to synthetic organic chemistry is, of course, widely recognized. Equally well known is the difficulty in keeping up-to-date with the multifarious reactions and procedures that seem to be spawned at an ever-increasing rate. These can certainly be summarized on the basis of reviews under the headings of the individual transition metals. More useful to the bench organic chemist, however, would be the opposite type of concordance based on the structural type of the desired synthetic product. This is the approach taken in the present monograph, which presents for each structural entity a conspectus of the transition metal-mediated processes that can be employed in its production. The resulting comparative survey should be a great help in devising the optimum synthetic approach for a particular goal. It is presented from an essentially practical viewpoint, with detailed direc tions interspersed in the Houben-Weyl style. The wide scope of the volume should certainly encourage synthetic organic chemists to utilize fully the range and versatility of these transition metal-mediated processes. This will certainly be a well-thumbed reference book! R. A. RAPHAEL Cambridge University v Preface In recent years an enormous amount of work has been done on the catalysis of organic reactions by various transition metal species and on the organic reactivity of organo-transition-metal compounds.
Download or read book Organic Synthesis using Transition Metals written by Rod Bates and published by Wiley-Blackwell. This book was released on 2000-07-21 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transition metals open up new opportunities for synthesis, because their means of bonding and their reaction mechanisms differ from those of the elements of the s and p blocks. In the last decade, the subject has mushroomed. Established reactions are seeing both technical improvements and increasing numbers of applications. New reactions are being developed. The practicality of the subject is demonstrated by the large number of publications coming from the process development laboratories of pharmaceutical companies. This volume considers the ways in which transition metals, as catalysts and reagents, can be used in organic synthesis. It concentrates on the bond-forming reactions that set transition metal chemistry apart from "classical" organic chemistry. The book is extensively referenced and so provides a convenient point of entry to the research literature.
Download or read book Organotransition Metal Chemistry Applications to Organic Synthesis written by S. G. Davies and published by Elsevier. This book was released on 2013-10-22 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although organotransition metal chemistry has been developing rapidly over the past 20 years, it is only recently that applications of transition metal complexes to organic synthesis have started to be exploited. This unique book provides an introduction to organometallic chemistry for chemists who have little or no experience in the field, describes the work that has already been done using organotransition metal complexes for synthesis, and indicates to organic and organometallic chemists the type of synthetic problems that can be solved using organometallic compounds. It covers all major advances that have been made in this rapidly expanding area of chemistry, including not only reactions that already have well established applications for synthesis but also many recently discovered potentially useful reactions, providing a survey of recent literature.
Download or read book Handbook of Less Common Nanostructures written by Boris I. Kharisov and published by CRC Press. This book was released on 2012-03-19 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nanotechnology has developed over the last two decades, some nanostructures, such as nanotubes, nanowires, and nanoparticles, have become very popular. However, recent research has led to the discovery of other, less-common nanoforms, which often serve as building blocks for more complex structures. In an effort to organize the field, the Handbook of Less-Common Nanostructures presents an informal classification based mainly on the less-common nanostructures. A small nanotechnological encyclopedia, this book: Describes a range of little-known nanostructures Offers a unifying vision of the synthesis of nanostructures and the generalization of rare nanoforms Includes a CD-ROM with color versions of more than 100 nanostructures Explores the fabrication of rare nanostructures, including modern physical, chemical, and biological synthesis techniques The Handbook of Less-Common Nanostructures discusses a classification system not directly related to the dimensionality and chemical composition of nanostructure-forming compounds or composite. Instead, it is based mainly on the less-common nanostructures. Possessing unusual shapes and high surface areas, these structures are potentially very useful for catalytic, medical, electronic, and many other applications.
Download or read book Selective Reactions of Metal Activated Molecules written by Helmut Werner and published by Springer. This book was released on 1998-03-13 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1990, the SFB (Sonderforschungsbereich) entitled "Selektive Reaktionen Metall-aktivierter Moleküle" was established at the University of Würzburg to promote efficient cooperation between various fields of chemistry and physics. An essential ingredient of this interdisciplinary research project is the periodic holding of meetings in order to present actual results and recent trends in organometallic chemistry and related areas. The third international symposium was held at the Chemical both from academia and industry. In plenary lectures provided by reputated invited scientists and posters contributed by the members of the SFB 347 a broad spectrum of actual results obtained in selective metal catalysis, organometallic synthesis, bioorganic reactions, physico-chemical and theoretical studies on organometallic compounds and intermediates has been covered. The information collected in this volume presents a useful insight in the recent trends and will stimulate further progress in the field. Das dritte Symposium des Würzburger Sonderforschungsbereiches "Selektive Reaktionen Metallaktivierter Moleküle" hat wieder viele hochkarätige Wissenschaftler aus Hochschulen und Industrie zusammengeführt. Der interdisziplinäre Austausch zu aktuellen Entwicklungen in der Syntheseplanung und zur Theorie der Organometallverbindungen findet seine schriftliche Dokumentation in diesem Forschungsband.
Download or read book Organometallic Chemistry in Industry written by Thomas J. Colacot and published by John Wiley & Sons. This book was released on 2020-05-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Showcases the important role of organometallic chemistry in industrial applications and includes practical examples and case studies This comprehensive book takes a practical approach to how organometallic chemistry is being used in industrial applications. It uniquely offers numerous, real-world examples and case studies that aid working R&D researchers as well as Ph.D. and postdoc students preparing to ace interviews in order to enter the workforce. Edited by two world-leading and established industrial chemists, the book covers flow chemistry (catalytic and non-catalytic organometallic chemistry), various cross-coupling reactions (C-C, C-N, and C-B) in classical batch chemistry, conjugate addition reactions, metathesis, and C-H arylation and achiral hydrogenation reactions. Beginning with an overview of the many industrial milestones within the field over the years, Organometallic Chemistry in Industry: A Practical Approach provides chapters covering: the design, development, and execution of a continuous flow enabled API manufacturing route; continuous manufacturing as an enabling technology for low temperature organometallic chemistry; the development of a nickel-catalyzed enantioselective Mizoroki-Heck coupling; and the development of iron-catalyzed Kumada cross-coupling for the large scale production of Aliskiren intermediates. The book also examines aspects of homogeneous hydrogenation from industrial research; the latest industrial uses of olefin metathesis; and more. -Includes rare industrial case studies difficult to find in current literature -Helps readers successfully carry out their own reactions -Covers topics like flow chemistry, cross-coupling reactions, and dehydrative decarbonylation -Features a foreword by Nobel Laureate R. H. Grubbs -A perfect resource for every R&D researcher in industry -Useful for PhD students and postdocs: excellent preparation for a job interview Organometallic Chemistry in Industry: A Practical Approach is an excellent resource for all chemists, including those working in the pharmaceutical industry and organometallics.
Download or read book Direct Synthesis of Metal Complexes written by B.I. Kharisov and published by Elsevier. This book was released on 2018-04-19 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Synthesis of Metal Complexes provides in-depth coverage of the direct synthesis of coordination and organometallic compounds. The work is primarily organized by methods, but also covers highly relevant complexes, such as metal-polymer coordination compounds. This updated reference discusses recent developments in cryosynthesis, electrosynthesis, and tribosynthesis (popular as it doesn’t require organic solvents), with special attention paid to ‘greener’ methodologies and approaches. Additionally, the book describes physical methods of zero-valent metal interaction with organic matter, including sputtering, ultrasonic treatment and synthesis in ionic liquids. The book presents completely new content as a follow-up to the 1999 Elsevier Science publication Direct Synthesis of Coordination and Organometallic Compounds that was edited by Dr. Garnovskii and Dr. Kharisov. Covers current methods and techniques of metal interactions with organic media leading to metal chelates, adducts, di- and polymetallic complexes, metal-containing macrocycles, supported coordination compounds (i.e., metal complexes on carbon nanotubes), and more Describes reactivities of distinct forms of elemental metals (powders, sheets, nanoparticles (including a host of less-common metal nanostructures) with organic phase (liquid, solid and gaseous) and water Includes experimental procedures, with examples of direct synthesis, at the end of each chapter
Download or read book Organic Syntheses by Oxidation with Metal Compounds written by W.J. Mijs and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the synthetic aspects of oxidation reactions involving metal compounds. which are readily available or easy to prepare. The sequence followed in the chapters is as follows: a general introduction. a limited treatment of reaction mechanisms to serve as a basis for synthesis. and scope and limitations of the oxidant system. mostly in terms of substrate and product classes. Finally, at the end of each chapter. representative synthetic procedures are given together with relevant experimental considerations. A general table is included as an appendix. This contains substrate classes and resulting product classes, referring to the oxidative procedures in the chapters. The table provides the synthetic organic chemist with a quick overview of oxidation possibilities with metal-contain ing oxidants, enabling him to select the right method for his purpose. The editors hope that not only organic research chemists in industry and at universities, but also advanced undergraduate and graduate students in organic chemistry, will find this book a useful guide in the design, understanding, and practical performance of oxidative organic syntheses. The editors are grateful to the authors not only for their contributions. containing interesting new developments in oxidation chemistry, but also for the way they fitted the text into the general framework given for the book. Their suggestions and comments are gratefully acknowledged. Thanks are also due to Mrs. A. I. Rohnstrom-Ouwejan, secretary to the editors, for her administrative support.
Download or read book New Pathways for Organic Synthesis written by H.M. Colquhoun and published by Springer. This book was released on 2011-11-01 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continually growing contribution of transition metal chemistry to synthetic organic chemistry is, of course, widely recognized. Equally well known is the difficulty in keeping up-to-date with the multifarious reactions and procedures that seem to be spawned at an ever-increasing rate. These can certainly be summarized on the basis of reviews under the headings of the individual transition metals. More useful to the bench organic chemist, however, would be the opposite type of concordance based on the structural type of the desired synthetic product. This is the approach taken in the present monograph, which presents for each structural entity a conspectus of the transition metal-mediated processes that can be employed in its production. The resulting comparative survey should be a great help in devising the optimum synthetic approach for a particular goal. It is presented from an essentially practical viewpoint, with detailed direc tions interspersed in the Houben-Weyl style. The wide scope of the volume should certainly encourage synthetic organic chemists to utilize fully the range and versatility of these transition metal-mediated processes. This will certainly be a well-thumbed reference book! R. A. RAPHAEL Cambridge University v Preface In recent years an enormous amount of work has been done on the catalysis of organic reactions by various transition metal species and on the organic reactivity of organo-transition-metal compounds.
Download or read book Organic Syntheses Volume 76 written by Stephen F. Martin and published by Wiley. This book was released on 1999-07-05 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current volume continues the tradition of providing significant and interesting procedures, which should prove worthwhile to many synthetic chemists working in increasingly diverse areas. Following precedent, there is no specific or central theme to this volume.
Download or read book Activation of Unreactive Bonds and Organic Synthesis written by Shinji Murai and published by Springer. This book was released on 2003-07-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years a large repetoire of methods for the activation of unreactive organic functionalities and for their use in organic synthesis has been developed. In this volume, areas ranging from the activation of C-H bonds to the chemical transformation of dinitrogen are authoritatively discussed by leading experts in the field. To activate means to be able to cleave otherwise inert chemical bonds. The cleavage and formation of chemical bonds is fundamental to organic synthesis; these new activation methodologies make hitherto infeasible reactions extremely easy and create new opportunities for innovative organic transformations, for both industry and academia. This is the first book that provides a thorough and timely coverage of both inorganic and organic synthetic aspects of bond activation, thus giving a broad overview of the field and allowing both inorganic and organic chemists ready access to the methodologies involved.
