Download or read book Torques and Attitude Sensing in Earth Satellites written by Siegfried Fred Singer and published by . This book was released on 1964 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Design of Linkages written by J. Michael McCarthy and published by Springer Science & Business Media. This book was released on 2010-11-11 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the mathematical theory of design for articulated mechanical systems known as linkages. The focus is on sizing mechanical constraints that guide the movement of a work piece, or end-effector, of the system. The function of the device is prescribed as a set of positions to be reachable by the end-effector; and the mechanical constraints are formed by joints that limit relative movement. The goal is to find all the devices that can achieve a specific task. Formulated in this way the design problem is purely geometric in character. Robot manipulators, walking machines, and mechanical hands are examples of articulated mechanical systems that rely on simple mechanical constraints to provide a complex workspace for the end- effector. The principles presented in this book form the foundation for a design theory for these devices. The emphasis, however, is on articulated systems with fewer degrees of freedom than that of the typical robotic system, and therefore, less complexity. This book will be useful to mathematics, engineering and computer science departments teaching courses on mathematical modeling of robotics and other articulated mechanical systems. This new edition includes research results of the past decade on the synthesis of multi loop planar and spherical linkages, and the use of homotopy methods and Clifford algebras in the synthesis of spatial serial chains. One new chapter on the synthesis of spatial serial chains introduces numerical homotopy and the linear product decomposition of polynomial systems. The second new chapter introduces the Clifford algebra formulation of the kinematics equations of serial chain robots. Examples are use throughout to demonstrate the theory.
Download or read book Dictionary of Technical Terms for Aerospace Use written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Division and published by . This book was released on 1965 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brief definitions "intended to be as clear as possible to the non-expert, but accuracy has not been compromised for the sake of readability. Mathematics has been used where necessary to avoid ambiguity."--Intro. Published 1965.
Download or read book Robot Hands and the Mechanics of Manipulation written by Matthew T. Mason and published by MIT Press (MA). This book was released on 1985-01 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Hands and the Mechanics of Manipulationexplores several aspects of the basic mechanics of grasping, pushing, and in general, manipulating objects. It makes a significant contribution to the understanding of the motion of objects in the presence of friction, and to the development of fine position and force controlled articulated hands capable of doing useful work. In the book's first section, kinematic and force analysis is applied to the problem of designing and controlling articulated hands for manipulation. The analysis of the interface between fingertip and grasped object then becomes the basis for the specification of acceptable hand kinematics. A practical result of this work has been the development of the Stanford/JPL robot hand - a tendon-actuated, 9 degree-of-freedom hand which is being used at various laboratories around the country to study the associated control and programming problems aimed at improving robot dexterity. Chapters in the second section study the characteristics of object motion in the presence of friction. Systematic exploration of the mechanics of pushing leads to a model of how an object moves under the combined influence of the manipulator and the forces of sliding friction. The results of these analyses are then used to demonstrate verification and automatic planning of some simple manipulator operations. Matthew T. Mason is Assistant Professor of Computer Science at Carnegie-Mellon University, and coeditor of Robot Motion (MIT Press 1983). J. Kenneth Salisbury, Jr. is a Research Scientist at MIT's Artificial Intelligence Laboratory, and president of Salisbury Robotics, Inc. Robot Hands and the Mechanics of Manipulationis 14th in the Artificial Intelligence Series, edited by Patrick Henry Winston and Michael Brady.
Download or read book Machines that Walk written by Shin-Min Song and published by MIT Press. This book was released on 1989 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is 16 feet long, 10 feet high, weighs 6,000 pounds, has six legs, and can sprint at 8 mph and step over a 4 foot wall? The Adaptive Suspension Vehicle (ASV) described in this book. Machines That Walk provides the first in depth treatment of the "statically stable walking machine" theory employed in the design of the ASV, the most sophisticated, self contained, and practical walking machine being developed today. Under construction at Ohio State University, the automatically terrain adaptive ASV has one human operator, can carry a 500 pound payload and is expected to have better fuel economy and mobility than that of conventional wheeled and tracked vehicles in rough terrain. The development of the ASV is a milestone in robotics research, and Machines That Walk provides a wealth of research results in mobility, gait, static stability, leg design, and vertical geometry design. The authors' treatment of statically stable gait theory and actuator coordination is by far the most complete available. Shin Min Song is an Assistant Professor in the Department of Mechanical Engineering at the University of Illinois at Chicago. Kenneth J. Waldron is Nordholt Professor in the Department of Mechanical Engineering at Ohio State University.
Download or read book Latest Advances in Robot Kinematics written by Jadran Lenarcic and published by Springer Science & Business Media. This book was released on 2012-05-19 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is of interest to researchers inquiring about modern topics and methods in the kinematics, control and design of robotic manipulators. It considers the full range of robotic systems, including serial, parallel and cable driven manipulators, both planar and spatial. The systems range from being less than fully mobile to kinematically redundant to overconstrained. In addition to recognized areas, this book also presents recent advances in emerging areas such as the design and control of humanoids and humanoid subsystems, and the analysis, modeling and simulation of human body motions, as well as the mobility analysis of protein molecules and the development of machines which incorporate man.
Download or read book Mechanics of Robotic Manipulation written by Matthew T. Mason and published by MIT Press. This book was released on 2001-06-08 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and engineering of robotic manipulation. "Manipulation" refers to a variety of physical changes made to the world around us. Mechanics of Robotic Manipulation addresses one form of robotic manipulation, moving objects, and the various processes involved—grasping, carrying, pushing, dropping, throwing, and so on. Unlike most books on the subject, it focuses on manipulation rather than manipulators. This attention to processes rather than devices allows a more fundamental approach, leading to results that apply to a broad range of devices, not just robotic arms. The book draws both on classical mechanics and on classical planning, which introduces the element of imperfect information. The book does not propose a specific solution to the problem of manipulation, but rather outlines a path of inquiry.
Download or read book Theoretical Kinematics written by O. Bottema and published by Courier Corporation. This book was released on 1990-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic, comprehensive treatment covers Euclidean displacements; instantaneous kinematics; two-position, three-position, four-and-more position theory; special motions; multiparameter motions; kinematics in other geometries; and special mathematical methods.
Download or read book Applied Dynamics written by Francis C. Moon and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Dynamics provides a modern and thorough examination of dynamics with specific emphasis on physical examples and applications such as: robotic systems, magnetic bearings, aerospace dynamics, and microelectromagnetic machines. Also includes the development of the method of virtual velocities based on the principle of virtual power.
Download or read book Advances in Robot Kinematics 2016 written by Jadran Lenarčič and published by Springer. This book was released on 2017-07-26 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together 46 peer-reviewed papers that are of interest to researchers wanting to know more about the latest topics and methods in the fields of the kinematics, control and design of robotic systems. These papers cover the full range of robotic systems, including serial, parallel and cable-driven manipulators, both planar and spatial. The systems range from being less than fully mobile, to kinematically redundant, to over-constrained. In addition to these more familiar areas, the book also highlights recent advances in some emerging areas: such as the design and control of humanoids and humanoid subsystems; the analysis, modeling and simulation of human-body motions; mobility analyses of protein molecules; and the development of machines that incorporate man.
Download or read book Robot Mechanisms written by Jadran Lenarcic and published by Springer Science & Business Media. This book was released on 2012-06-12 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the area of robot mechanisms, primarily considering industrial manipulators and humanoid arms. The book is intended for both teaching and self-study. Emphasis is given to the fundamentals of kinematic analysis and the design of robot mechanisms. The coverage of topics is untypical. The focus is on robot kinematics. The book creates a balance between theoretical and practical aspects in the development and application of robot mechanisms, and includes the latest achievements and trends in robot science and technology.
