Download or read book Accidental Explosions Types of explosive substances written by Louis A. Medard and published by Ellis Horwood. This book was released on 1989 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dust Explosions in the Process Industries written by Rolf K. Eckhoff and published by Elsevier. This book was released on 2003-07-18 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfortunately, dust explosions are common and costly in a wide array of industries such as petrochemical, food, paper and pharmaceutical. It is imperative that practical and theoretical knowledge of the origin, development, prevention and mitigation of dust explosions is imparted to the responsible safety manager. The material in this book offers an up to date evaluation of prevalent activities, testing methods, design measures and safe operating techniques. Also provided is a detailed and comprehensive critique of all the significant phases relating to the hazard and control of a dust explosion. An invaluable reference work for industry, safety consultants and students. - A completely new chapter on design of electrical equipment to be used in areas containing combustible/explosible dust - A substantially extended and re-organized final review chapter, containing nearly 400 new literature references from the years 1997-2002 - Extensive cross-referencing from the original chapters 1-7 to the corresponding sections of the expanded review chapter
Download or read book Containing the Threat from Illegal Bombings written by National Research Council and published by National Academies Press. This book was released on 1998-05-27 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the rising concern of the American public over illegal bombings, the Bureau of Alcohol, Tobacco, and Firearms asked the National Research Council to examine possible mechanisms for reducing this threat. The committee examined four approaches to reducing the bombing threat: addition of detection markers to explosives for pre-blast detection, addition of identification taggants to explosives for post-blast identification of bombers, possible means to render common explosive materials inert, and placing controls on explosives and their precursors. The book makes several recommendations to reduce the number of criminal bombings in this country.
Download or read book Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-05-19 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improvised explosive devices (IEDs) are a type of unconventional explosive weapon that can be deployed in a variety of ways, and can cause loss of life, injury, and property damage in both military and civilian environments. Terrorists, violent extremists, and criminals often choose IEDs because the ingredients, components, and instructions required to make IEDs are highly accessible. In many cases, precursor chemicals enable this criminal use of IEDs because they are used in the manufacture of homemade explosives (HMEs), which are often used as a component of IEDs. Many precursor chemicals are frequently used in industrial manufacturing and may be available as commercial products for personal use. Guides for making HMEs and instructions for constructing IEDs are widely available and can be easily found on the internet. Other countries restrict access to precursor chemicals in an effort to reduce the opportunity for HMEs to be used in IEDs. Although IED attacks have been less frequent in the United States than in other countries, IEDs remain a persistent domestic threat. Restricting access to precursor chemicals might contribute to reducing the threat of IED attacks and in turn prevent potentially devastating bombings, save lives, and reduce financial impacts. Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals prioritizes precursor chemicals that can be used to make HMEs and analyzes the movement of those chemicals through United States commercial supply chains and identifies potential vulnerabilities. This report examines current United States and international regulation of the chemicals, and compares the economic, security, and other tradeoffs among potential control strategies.
Download or read book Recommendations on the Transport of Dangerous Goods written by United Nations and published by . This book was released on 2020-01-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Tests and Criteria contains criteria, test methods and procedures to be used for classification of dangerous goods according to the provisions of Parts 2 and 3 of the United Nations Recommendations on the Transport of Dangerous Goods, Model Regulations, as well as of chemicals presenting physical hazards according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). As a consequence, it supplements also national or international regulations which are derived from the United Nations Recommendations on the Transport of Dangerous Goods or the GHS. At its ninth session (7 December 2018), the Committee adopted a set of amendments to the sixth revised edition of the Manual as amended by Amendment 1. This seventh revised edition takes account of these amendments. In addition, noting that the work to facilitate the use of the Manual in the context of the GHS had been completed, the Committee considered that the reference to the "Recommendations on the Transport of Dangerous Goods" in the title of the Manual was no longer appropriate, and decided that from now on, the Manual should be entitled "Manual of Tests and Criteria".
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
Download or read book Brain Neurotrauma written by Firas H. Kobeissy and published by CRC Press. This book was released on 2015-02-25 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the contribution from more than one hundred CNS neurotrauma experts, this book provides a comprehensive and up-to-date account on the latest developments in the area of neurotrauma including biomarker studies, experimental models, diagnostic methods, and neurotherapeutic intervention strategies in brain injury research. It discusses neurotrauma mechanisms, biomarker discovery, and neurocognitive and neurobehavioral deficits. Also included are medical interventions and recent neurotherapeutics used in the area of brain injury that have been translated to the area of rehabilitation research. In addition, a section is devoted to models of milder CNS injury, including sports injuries.
Download or read book Modeling Explosions and Blast Waves written by K. Ramamurthi and published by Springer Nature. This book was released on 2021-06-19 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: b="" The book provides a concise description of the physical processes and mathematical models for explosions and formation of blast waves from explosions. The contents focus on quantitatively determining the energy released in the different types of explosions and the destructive blast waves that are generated. The contribution of flames, detonations and other physical processes to the explosion phenomenon is dealt with in detail. Gaseous and condensed phase explosions are discussed and the yield of explosions with their TNT equivalence is determined. Time scales involved in the explosion process and the scaling procedure are ascertained. Explosions over the ground, in water, and the interaction of explosions with objects are examined. In order to keep the text easily readable, the detailed derivation of the mathematical equations is given in the seven appendices at the end of the book. Case studies of various explosions are investigated and simple problems and their solutions are provided for the different topics to assist the reader in internalizing the explosion process. The book is a useful reference for professionals and academics in aeronautics, mechanical, civil and chemical engineering and for personnel working in explosive manufacture and high-energy materials, armaments, space, defense, and industrial and fire safety.
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures to Resist the Effects of Accidental Explosions written by and published by . This book was released on 1991 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-09-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. - Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects - Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting - Addresses important application areas such as aerospace, automotive, wind energy, defense and sports
Download or read book Neurotrauma written by Raj K. Narayan and published by McGraw-Hill. This book was released on 1996 with total page 1558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference is a comprehensive work in the field of neurotrauma and critical care. It incorporates the fields of head injury, spinal injury and basic neurotrauma research into one source. The major emphasis is on the treatment of patients with head and spinal cord injury, including the management of all other problems that bear upon the care of these patients.
Download or read book Explosions in the Process Industries written by Major Hazards Assessment Panel. Overpressure Working Party and published by IChemE. This book was released on 1994 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This booklet provides a summary of the information on which estimation of the injuries and damage caused by the blast and consequent missile effects of large explosions can be made for planning and design purposes.
Download or read book Structural Design for Physical Security written by Task Committee on Structural Design for Physical Security and published by ASCE Publications. This book was released on 1999-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.
Download or read book The Chemistry of Explosives written by Jacqueline Akhavan and published by Royal Society of Chemistry. This book was released on 2004 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded to reflect new developments in the field, this book outlines the basic principles required to understand the chemical processes of explosives. The Chemistry of Explosives provides an overview of the history of explosives, taking the reader to future developments. The text on the classification of explosive materials contains much data on the physical parameters of primary and secondary explosives. The explosive processes of deflagration and detonation, including the theory of 'hotspots' for the detonation process, are introduced and many examples are provided in the detailed description on the thermochemistry of explosives. New material includes coverage of the latest explosive compositions, such as high temperature explosives, nitrocubanes, energetic polymers, plasticizers and insensitive munitions (IM). This concise, readable book is ideal for 'A' level students and new graduates with no previous knowledge of explosive materials. With detailed information on a vast range of explosives in tabular form and an extensive bibliography, this book will also be useful to anyone needing succinct information on the subject.
Download or read book Blast Protection of Civil Infrastructures and Vehicles Using Composites written by Nasim Uddin and published by Elsevier. This book was released on 2010-03-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the upsurge in terrorism in recent years and the possibility of accidental blast threats, there is growing interest in manufacturing blast 'hardened' structures and retrofitting blast mitigation materials to existing structures. Composites provide the ideal material for blast protection as they can be engineered to give different levels of protection by varying the reinforcements and matrices.Part one discusses general technical issues with chapters on topics such as blast threats and types of blast damage, processing polymer matrix composites for blast protection, standards and specifications for composite blast protection materials, high energy absorbing composite materials for blast resistant design, modelling the blast response of hybrid laminated composite plates and the response of composite panels to blast wave pressure loadings. Part two reviews applications including ceramic matrix composites for ballistic protection of vehicles and personnel, using composites to protect military vehicles from mine blasts, blast protection of buildings using FRP matrix composites, using composites in blast resistant walls for offshore, naval and defence related structures, using composites to improve the blast resistance of columns in buildings, retrofitting using fibre reinforced polymer composites for blast protection of buildings and retrofitting to improve the blast response of concrete masonry walls.With its distinguished editor and team of expert contributors, Blast protection of civil infrastructures and vehicles using composites is a standard reference for all those concerned with protecting structures from the effects of blasts in both the civil and military sectors. - Reviews the role of composites in blast protection with an examination of technical issues, applications of composites and ceramic matrix composites - Presents numerical examples of simplified blast load computation and an overview of the basics of high explosives includes important properties and physical forms - Varying applications of composites for protection are explored including military and non-military vehicles and increased resistance in building columns and masonry walls
