Download or read book Abnormal grain growth in metals written by James Dennis and published by . This book was released on 2008 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Abnormal Grain Growth in Metals and the Influence of Such Growth on the Mechanical Properties of Alpha Brass written by D. K. Crampton and published by . This book was released on 1918 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain Boundary Migration in Metals written by Gunter Gottstein and published by CRC Press. This book was released on 1999-06-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of adjacent materials at the boundary where they meet is an essential aspect of creating new engineering materials. Grain Boundary Migration in Metals is an authoritative account of the physics of grain boundary motion, written by two highly respected researchers. They provide a comprehensive overview of current knowledge regarding the migration process and how it affects microstructure evolution, focusing their treatment exclusively on the properties and behavior of grain boundaries with well defined geometry and crystallography. With their emphasis on applications-such as the characterization of microstructure and texture, recrystallization, and grain growth-the authors effectively fill the gap between the physics of grain boundary motion and its engineering practicality. The need for better microstructural design motivates permanent thrust for research in the field, and continued rapid progress appears inevitable. Grain Boundary Migration in Metals provides a solid foundation in the phenomena and serves as a valuable reference for professionals in materials science, solid state physics, and any industry engaged in metals production and the heat treatment of metals and alloys.
Download or read book Recrystallization and Grain Growth in Metals written by P. Cotterill and published by John Wiley & Sons. This book was released on 1976 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization in Materials Processing written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Induced Abnormal Grain Growth in Nanocrystalline Metals written by and published by . This book was released on 2015 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. - Demonstrates how friction stir processing can be used to make metal matrix composites - Includes a review of different approaches of making metal matrix composites by friction stir processing - Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites - Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites
Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.
Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.
Download or read book An Investigation of Abnormal Grain Growth in High Speed Steel written by Andreas Andersen and published by . This book was released on 1951 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Texture and the Properties of Materials written by G. J. Davies and published by . This book was released on 1976 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallic Films for Electronic Optical and Magnetic Applications written by Katayun Barmak and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic films play an important role in modern technologies such as integrated circuits, information storage, displays, sensors, and coatings. Metallic Films for Electronic, Optical and Magnetic Applications reviews the structure, processing and properties of metallic films. Part one explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy. This part also encompasses the processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations. Chapters in part two focus on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties. Metallic Films for Electronic, Optical and Magnetic Applications is a technical resource for electronics components manufacturers, scientists, and engineers working in the semiconductor industry, product developers of sensors, displays, and other optoelectronic devices, and academics working in the field. - Explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy - Discusses processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations - Focuses on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties
Download or read book Dynamic Abnormal Grain Growth in Selected Refractory Metals written by Nicholas Alan Pedrazas and published by . This book was released on 2013 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic abnormal grain growth (DAGG) is a phenomenon by which single crystals up to centimeters in length are produced at elevated temperature during the application of strain. DAGG was previously demonstrated in commercial-purity molybdenum (Mo) materials. This is the first investigation to confirm DAGG in another material, tantalum (Ta). Previous experiments initiated and propagated DAGG using constant true-strain rate tensile tests, but this study demonstrates that DAGG can also occur under constant true-stress tensile conditions. A Mo material was tested under constant true stress, and two Ta materials were tested under constant true-strain rate. The effects of temperature, stress, strain rate, initial microstructure and texture on tensile test data and the resulting microstructures are examined. The microstructures of the Ta materials are analyzed using electron backscatter diffraction (EBSD) data to quantify the orientation, deformation, grain boundary character, and slip properties of the DAGG grains and unconsumed microstructure. The DAGG grains were found to be relatively undeformed compared to the unconsumed microstructure following DAGG and to not be oriented favorably, or unfavorably, for slip. The grain boundaries between DAGG grains in one Ta material were found to commonly have [sigma]3 character. This was likely due to a strong initial 111-fiber texture. Previous investigations of DAGG in Mo indicated that DAGG grains commonly grow along the surface of the specimen, but this was not observed with significant frequency in Ta. Results suggest that the distance the DAGG grain boundary travels is proportional to the accumulated strain during DAGG, and the velocity of the DAGG grain boundary is proportional to the applied strain rate but is not related to the orientation of the DAGG grain or its slip properties.
Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2009-11-16 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra
Download or read book Stability of Microstructure in Metallic Systems written by J. W. Martin and published by Cambridge University Press. This book was released on 1997-03-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this textbook, popular amongst students and faculty alike, investigates the various causes of thermodynamic instability in metallic microstructures. Materials theoretically well designed for a particular application may prove inefficient or even useless unless stable under normal working conditions. The authors examine current experimental and theoretical understanding of the kinetics behind structural change in metals. The entire text has been updated in this new edition, and a completely new chapter on highly metastable alloys has been added. The degree to which kinetic stability of the material outweighs its thermodynamic instability is very important, and dictates the useful working life of the material. If the structure is initially produced to an optimum, such changes will degrade the properties of the material. This comprehensive and well-illustrated text, accompanied by ample references, will allow final year undergraduates, graduate students and research workers to investigate in detail the stability of microstructure in metallic systems.
Download or read book 2D and 3D Grain Growth Modeling and Simulation written by Luis Antonio Barrales-Mora and published by Cuvillier Verlag. This book was released on 2008 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
