Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by European Federation of Corrosion and published by CRC Press. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated set of guidelines applicable to stainless steels, nickel alloys and titanium alloys covering: SSC/SCC test procedures; reference environments for SSC and SCC testing; guidance on autoclave testing of CRAs; procedures for testing CRAs exposed to sulphur and H2S.
Download or read book Recommended Practice for Corrosion Management of Pipelines in Oil Gas Production and Transportation written by Bijan Kermani and published by CRC Press. This book was released on 2017-12-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Pipeline integrity is key to maintaining operational success, safety and security and minimising harm to the environment. Corrosion is a dominant contributory factor to failures, leaks and integrity threats in pipelines. Therefore, its optimum control within an integrity management framework is paramount for the cost-effective design of facilities and ensuring continued, uninterrupted and safe operations within the expected design life. This recommended practice (RP) is a compendium of current best practices and state-of-the-art knowledge by major operators, engineering contractors and service companies involved in hydrocarbon pro-duction and transportation. The RP incorporates some minimum operational requirements and practices to ensure that when man-aging corrosion in pipelines, fundamental principles are followed. It covers management of corrosion for pipelines carrying hydrocarbons, injection water and/or produced water from design to decommissioning. It is structured to follow the logical steps of a basic corrosion management process and makes references to relevant and available international standards and/or recommended practices. It is intended for use by personnel from the petroleum industry having knowledge of corrosion and materials. It is hoped that this RP will prove to be a key reference document for engineers, suppliers and con-tractors working in the oil and gas industry, paving the way for corrosion-free operation of pipelines with the ultimate goal of improving safety, security and minimising the impact on the environment
Download or read book Marine Corrosion of Stainless Steels written by D. Féron and published by CRC Press. This book was released on 2021-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Number 33 of the Marine Corrosion of Stainless Steels, a publication of the European Federation of Corrosion (EFC). Part I of this volume on the "Marine Corrosion of Stainless Steels" consists of five chapters and is concerned with tests that were conducted in the 1990s on the corrosivity of European sea waters (Atlantic, Baltic, English Channel, Mediterranean, and North Sea) towards three types of stainless steels. Results from these two test programmes were presented at a European Workshop on Sea Water Corrosion of Stainless Steels in Trondheim in 1996 and at various corrosion conferences, mostly in Europe. The other four chapters in Part I describe experimental procedures, critical pitting temperature data, crevice corrosion results and results from the MAST biofilm studies. The remaining 23 chapters of the book are concerned with reviews and reports that develop the above topics.
Download or read book Corrosion Modelling with Cellular Automata written by Damien Feron and published by Elsevier. This book was released on 2024-03-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Modelling with Cellular Automata bridges the gap between finer scales based on atomic physics and the larger-scale based on physico-chemical properties of materials and their environments. The book describes the simulation and modeling of corrosion phenomena by cellular automata and underlines the collaborative and interdisciplinary relationships that underpin them. It explores the major achievements that have been performed to date, covers basic knowledge on cellular automata and corrosion phenomena, and includes sections on CA modeling of generalized and uniform corrosion in 2D and 3D under various conditions, including aqueous environments and high temperature processes. Finals sections present examples on the use of cellular automata for modeling localized corrosion as well as recent developments on intergranular corrosion. There is also a review on the use of CA for modeling pitting corrosion. Focuses on the use of cellular automata for modeling corrosion Covers recent advances in modeling generalized corrosion with cellular automata Illustrates how cellular automata can be used to model localized corrosion (pitting and intergranular corrosion) Spans various length scales from atomistic to mesoscale
Download or read book Corrosion Resistant Alloys for Oil and Gas Production Efc 17 written by European Federation of Corrosion and published by CRC Press. This book was released on 2006-12-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Reinforcement in Concrete EFC 25 written by J. Mietz and published by CRC Press. This book was released on 2020-08-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the full papers presented in the successful session "Corrosion of Steel in Concrete" at EUROCORR '97. It highlights the areas of technical development in this field, including monitoring of steel reinforcement corrosion, prevention of corrosion and electrochemical repair methods.
Download or read book Novel Approaches to Improving High Temperature Corrosion Resistance written by M Schütze and published by Elsevier. This book was released on 2008-05-29 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature corrosion is a major problem affecting sectors such as the power generation, aerospace and metal-working industries. This important book summarises a wide range of research on ways of dealing with this important problem. The first part of the book reviews ways of modifying alloys to improve high-temperature corrosion resistance. The second part discusses surface treatments such as pre-treatments and coatings. The third part of the book summarises research on testing for high-temperature corrosion resistance and the development of common testing standards. It also reviews research on the behaviour of alloys in a wide range of service conditions such as furnace and boiler environments. The final part of the book discusses ways of modelling high-temperature corrosion processes to improve material performance and service life.With its distinguished editors and team of contributors drawn from some of the leading centres of research in the field, Novel approaches to improving high-temperature corrosion resistance is a standard reference for all those studying and dealing with high-temperature corrosion. Summarises a wide range of research on ways of dealing with high-temperature corrosion Discusses ways of modelling high-temperature corrosion processes to improve material performance and service life A standard reference for all those studying and dealing with high-temperature corrosion
Download or read book Stress Corrosion Cracking of Nickel Based Alloys in Water cooled Nuclear Reactors written by Damien Feron and published by Woodhead Publishing. This book was released on 2016-01-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled Nuclear Reactors: The Coriou Effect presents the latest information on brittle failure of metals in corrosive chemical environments under the influence of tensile stresses. Nickel alloys are more resistant to SCC as well as high temperatures and have been widely used in more challenging environments such as nuclear power plants. However, these alloys can suffer SCC under certain conditions, resulting in component failure. A key figure in understanding the mechanisms of SCC in nickel alloys in water-cooled nuclear reactors is Henri Coriou of the CEA, France’s leading center for nuclear research. This book assesses his work in the context of the latest research on SCC in nickel alloys in nuclear power plants. Up-to-date reviews of recent research findings from leading experts in the field Authoritative and comprehensively reviewed by the Working Party 4 on Nuclear Corrosion Showcases the excellent quality and technical accomplishments of Henri Coriou and CEA
Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures. Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. Reviews key factors affecting the corrosion and service life of copper and aluminium alloys Discusses the use of the alloys in seawater
Download or read book Corrosion Performance of Metals for the Marine Environment EFC 63 written by Roger Francis and published by CRC Press. This book was released on 2019-05-14 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.
Download or read book Organic and Inorganic Coatings for Corrosion Prevention written by L. Fedrizzi and published by CRC Press. This book was released on 2019-11-28 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and Inorganic Coatings for Corrosion Prevention - Research and Experiences is a collection of Papers from EUROCORR '96 and published for the European Federation of Corrosion by The Institute of Materials. In the session on Coatings the following topics were discussed: • Life-time prediction of organic coatings; • Environmentally friendly coatings; • Testing; and • Surface preparation techniques. This book contains a selection of the scientific work presented in the Conference with the aim of focusing on the research developments in the frame of corrosion protection coatings for industrial use. The book is in four sections describing, respectively, organic coatings, zinc coatings, other metallic coatings and ceramic coatings.
Download or read book Corrosion Under Insulation CUI Guidelines written by and published by Woodhead Publishing. This book was released on 2015-11-26 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical and offshore companies. The guidelines are intended for use on all plants and installation that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. The original document first published in 2008 was very successful and provided an important resource in the continuing battle to mitigate CUI. Many members of the EFC corrosion community requested an update and this has taken between 18-24 months to do so. Hopefully this revised document will continue to serve the community providing a practical source of information on how to monitor and manage insulated systems. Revised and fully updated technical guidance on managing CUI provided by EFC Working Parties WP13 and WP 15 Contributions from a number of European refining, petrochemical and offshore companies Extensive appendices that provide additional practical guidance on the implementation of corrosion-under-insulation best practice, collected practical expertise and case studies
Download or read book Corrosion in Amine Treating Units written by Johan van Roij and published by Woodhead Publishing. This book was released on 2021-10-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in Amine Treating Units, Second Edition presents a fully updated resource with a broadened focus that includes corrosion in not only refining operations, but also in oil and gas production. New sections have been added on inhibition, corrosion modeling and metallic coatings. More detailed descriptions of the degradation mechanisms and Integrity Operating Windows (IOW) are now included, as is more in-depth information on guidelines for what sections and locations are most vulnerable to corrosion and how to control corrosion in amine units e.g., using corrosion Loop descriptions and providing indicative integrity operating windows for operation to achieve a suitable life expectance. Provides new insights on the degradation mechanisms occurring in amine treating units and the locations within the unit where they occur Discusses how to mitigate and control corrosion in amine units Provides guidance for setting up corrosion control documents and inspection and maintenance plans for amine treating units
Download or read book Corrosion Management of Seawater Cooling Systems written by Francois Ropital and published by Elsevier. This book was released on 2024-06-28 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Management of Seawater Cooling Systems, Volume 71 provides an overview on main seawater heat exchanger systems, different forms of corrosion, biocide treatments, corrosion, scale inhibitors, materials used, coatings and cathodic protection, maintenance, and monitoring and control. The book will be a valuable reference resource for academics, technicians and engineers who are interested in the corrosion management of seawater cooling systems. The evolution of practices in terms of sustainability, materials choice, treatment selection and changes to regulations have demonstrated the need to establish this new guide on recommended best practices that support corrosion management and the development of seawater heat exchangers. Seawater is considered an attractive resource for utilities in many industries such as power plants, refineries and chemical plants. Seawater cooling systems are used in heat exchangers, in once-through cooling water systems, and for recirculating cooling water systems. The metallurgy and materials used in these facilities need to be compatible with seawater and allow good corrosion control. As seawater composition and suspended solids can cause corrosion, scaling, fouling, microbiological growth and macrofouling problems, this book is a necessary addition to the conversation. Covers key technological developments in corrosion management of seawater cooling systems Includes coverage of seawater heat exchangers“/li> Provides information on many different forms of corrosion Presents tactics for the selection of materials, corrosion protections (inhibitors, coatings, cathodic protection) Discusses maintenance, control, monitoring and inspection
Download or read book Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation written by Jean-Pierre Celis and published by Routledge. This book was released on 2017-07-05 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers and medical persons involved with material assemblies subjected to aggressive environmental and mechanical conditions. For academic researchers it is a pertinent tool assisting them in how they can perform a tribocorrosion investigation and obtain results that are correctly interpreted and can be exchanged. Different parts of the book are illustrated with practical examples. This handbook is truly an indispensable guide for every professional who comes into contact with the complex material degradation and protection processes that take place under combined corrosion and wear conditions. Fields of interest include: transportation (aeronautics, maritime, rail, automotive), medical implants (orthopaedics, dentistry), biochemistry, food production, energy production, and machining. The coordination of this handbook writing was done by Professor Jean-Pierre Celis (Katholieke Universiteit Leuven, Belgium) and Professor Pierre Ponthiaux (Ecole Centrale Paris, France) assisted by twelve European experts who contributed jointly to the nine chapters of this handbook. Main topics dealt with are tribocorrosion phenomena in medical and industrial sectors, depassivation and repassivation phenomena, impact on synergism in tribocorrosion, specific testing techniques, coupling tribology-to-corrosion, design of a testing protocol, and normalisation.
Download or read book Mechanical and Electro chemical Interactions under Tribocorrosion written by Pierre Ponthiaux and published by Woodhead Publishing. This book was released on 2021-08-22 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Electro-chemical Interactions under Tribocorrosion: From Measurements to Modelling for Building a Relevant Monitoring Approach looks at progress in the field of tribocorrosion. The work is a result of the efforts of the European tribocorrosion community gathered under the auspices of the European Corrosion Federation (EFC) within WP18 Tribocorrosion. In addition to the handbook, Testing Tribocorrosion of Passivating Materials Supporting Research and industrial Innovation published in 2012, this release describes the latest scientific approaches recognized and validated experimentally to address tribocorrosion. Sections look at the phenomena of coupling through an understanding of the associated mechanisms and how to identify variables. Final sections cover strategies to control and/or extend the life of structures in a multi-process coupling situation and an in-depth description of the current state-of-the-art on modeling approaches of tribocorrosion. Reviews the multidisciplinary basics of tribocorrosion Includes insights into novel experimental approaches Provides insights into advanced modeling techniques of tribocorrosion Looks at the implication of results in the development of the monitoring of tribocorrosion